Dear Group,
I am having a strange issue out here, I have a network running with 2 x 6506
core switches conencted back2back. I can ping all the IPs on my metwork from
the one of the switches MSFC console but not from the SC0 of the same
switch. If I completly shutdown my problematic switch then
Hi ,
I just need to know what is the procedure if I want to upgrade my PIX license
to enable VPN-3DES feature (which is presently disabled). Either thru CCO or
by the mean of TAC case with Cisco ?? Is it free from Cisco or chargeable ??
Many thanks in advance
Thnx
Hitesh
Dear Group,
anybody knows some good resources on web for Fibre cables specifications
(w.r.t. Cisco products) standards.
many thanks in advance.
Hitesh
**Disclaimer
Information contained in this E-MAIL being proprietary to Wipro
Dear Group,
Need you help in resolving this configuration issue. Below is the setup that
I
am trying to do :-
CiscoCallManager-LAN SWITCHLAN SWITCH
| |
2 MBPS| |
Dear Group,
Need some info on establishing site-2-site VPN using Cisco secure 525 PIX
firewall. Can some body forward some url or sample config on the same.
Many thnx in advance
Thanks
Hitesh
DISCLAIMER:
Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited
on this.
regds
Hitesh
-Original Message-
From: Vicuna, Mark [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 08, 2003 7:45 AM
To: Hitesh Pathak R
Subject: RE: Catalyst 6xxx switches and 2 firewall in clust [7:60235]
Importance: High
Hi Hitesh,
I am curious to find out your solution
, then that is a
serious problem. You need to avoid a loop by fixing either the physical or
logical topology with properly formed LANs or VLANs.
Priscilla
Hitesh Pathak R wrote:
Pls see inline text for answers.
regds
Hitesh
-Original Message-
From: Priscilla Oppenheimer [mailto
the situation better? Thanks.
See some questions inline.
l0stbyte wrote:
Hitesh Pathak R wrote:
Dear Group,
Need your help in setting up the following :-
SETUP :- There are 2 core switches SW1 Sw2 (connected back
to back with
both
the SUP GE ports Fiber uplink (Channeld and trunk
Dear Group,
Need your help in setting up the following :-
SETUP :- There are 2 core switches SW1 Sw2 (connected back to back with
both
the SUP GE ports Fiber uplink (Channeld and trunk). On one of the switch
(SW1)
I have 2 firewalls connected in cluster mode. For this clustered firewall I
have
Dear Group ,=20
Is it possible to achieve the timeout of any link outage connected =
between two routers across the 2 WAN locations not to exceed more then =
200ms. (application requirement).
One of my customer has a setup of 2 sites connected with 4 E1 links (2 x =
routers =3D 3700 and 2 MBPS x
Dear Group,
Does anybody know a url on the web which gives comparison or advantages
between FrameRelay and Leased Line.
Many thanks in Advance
Hitesh
DISCLAIMER:
Information contained and transmitted by this E-MAIL is proprietary to Wipro
Limited and is intended for use only by the
Dear Group,
If I want to differentiate the traffic flowing through two diff serial ports
based on HTTP only (1 serial port) and SMTP only (2nd serial port)then what
are the possible ways to configure it ??
Many thanks in advance..
Regds
Hitesh
DISCLAIMER:
Information contained and
Dear Group,
i m facing a piculiar problem. i have 2 cat 6509's switches as CORE
connected back to back. Both the switches has 2 MSFC's (total four) as a
redundent. I have configured HSRP between them and even enabled MLS on both
the switches.
I have followed proper Cisco documentation for
Dear Group,
I am having a setup like this :-
cat6k -- cat6k Coer switches
| |
| |
| Cat5k| = Floor switch
| Cat5k| = Floor switch
I am connecting the sniffer on one of my core switches
Dear Group,
Need your help in setting up this :-
I have a router make huawei 1600 model. On my serial port i am connecting
GPRS mobile phone and dialing to my ISP for internet connectivity. I am
facing some problem in connecting. I get the ip from the isp after the
dialin but i am not able to
Dear Group
I want to know about implementing Mac based Vlan in Cisco. Can anybody help
me.
Many thanks in advance.
Hitesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=47284t=47284
--
FAQ, list archives, and subscription
catOS, here is a start
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_3/config/v
mps.htm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Hitesh Pathak R
Sent: Monday, June 24, 2002 6:42 AM
To: [EMAIL PROTECTED]
Subject: Need suggestion
Dear Group
I remember there was some url posted for cat 5000 command simulator. I am
preparing for my BCMSN. Would anybody be able to help me .
Many thanks
Hitesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=45735t=45735
--
Dear Group
I am configuring the IPX/SAP traffic forwarding between Vlan's on a catalyst
6006 with MSFC. The scenario is like this :-
cat6506(CORE)-cat4003(DISTRIBUTION)-cat2924(Access)clients
1) Vlan no. 15 Server Vlan
All my servers are connected to this Vlan. I have a Nolell
Dear Group
I'm getting following error message on to my catalyst 2924 switch console.
Can anybody explain what does this mean ??
*Mar 2 17:58:49: %RTD-1-ADDR_FLAP: FastEthernet0/6 relearning 7 addrs per
min
*Mar 2 17:59:49: %RTD-1-ADDR_FLAP: FastEthernet0/2 relearning 16 addrs per
min
*Mar 2
20 matches
Mail list logo