it to
the regular serial interface?
2. Also, in a different network, can I apply my output service policy to a
POS interface, or will the router bark?
I've applied service policies to serial interfaces in the past with no
problem, but you never know what will happen when it's a new kind of
interface.
- Jennifer
/152.html#sixth
- Jennifer Mellone
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=61476t=61476
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
It's good for simulating VOIP phone calls while measuring delay, jitter, and
packet loss.
- Jennifer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=58232t=57710
--
FAQ, list archives, and subscription info:
Cute!
So I'm thinking that tomorrow (Halloween) I'll put on a subnet mask.
It will be 255.255.0.0, and the two 0's will have little holes in the middle
for my eyes ;-)
- Jennifer Mellone
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=56577t=56551
a shrink wrapped product today. Consultants bring it in
and use it on the network and write a report/make recommendations.
http://www1.avaya.com/enterprise/testimonials/svc1737.pdf
http://www.netiq.com/solutions/voip/default.asp
- Jennifer Mellone
Message Posted at:
http://www.groupstudy.com/form
I was thinking of using the appropriate sections of the QoS Configuration
Guide and Multiservice Configuration Guide (IOS 12.1) from the Cisco CD/Web.
I figure they need to be read for the lab anyway (that's why I picked IOS
12.1).
I started reading the QoS guide, and it has theory in the
Larry,
I noticed you have the command switchport trunk encapsulation dot1q.
Do you need to configure the interface/port as a trunk when you do the set
port auxiliaryvlan command (catos) or the switch voice vlan command (ios
switch)? According to Cisco's website, you don't for a catos switch,
Larry,
Don't mind me, I'm not challenging the configs, just trying to learn -
sometimes Cisco's website can be very unclear to me ;-)
I forgot to ask - How are those Avaya phones working out compared to Cisco
phones?
- Jennifer
Message Posted at:
fair-queue.}
- Jennifer Mellone
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=55434t=55432
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
That sounds great and makes more sense now! I always like reading your posts
:-)
I always confuse which device plugs into which port. I remember it like this:
Plug phone or Station into FXS (where Station=S)
Plug PBX/CO into FXO (where Office=0)
- Jennifer
Message Posted at:
Hi CCIE Written Candidates,
Have you looked at the URLs on the Cisco blueprint page? These URLs are kind
of ad-hoc, and some use IOS 12.1 and some use IOS 12.2. Ad-hoc drives me
crazy since I desire structure. So I have an idea for a study procedure -
let me know what you think:
Simply go to
for the famous hell week. As the Seal trainees say,
The Only Easy Day Was Yesterday ;-)
- Jennifer Mellone
CCNP, FNCNE (Foundry Networks)
B.S.E.E., M.S. Engineering Management
a, b, c, d, e ;-)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=49167t=49167
ISP A asked me which 2 ARIN class C's I wanted to advertise. I told them
xxx.yyy.216.0 and xxx.yyy.217.0. Then they came back and said, did you want
us to announce the 2 /24's or the /23?
I thought, isn't this up to me? I'm the one who configures it on my end.
For example, I can use the
)!
I'll post to the list as I continue the road to CCNP.
For my info. on Routing 2.0, refer to previous post from 10/20/2000
"BSCN/Routing 2.0: Here's the Gouge..."
- Jennifer Mellone
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
and got 48/63 (passing score
47-ouch!).
With scores like that, do you think I'd pass by a comfortable margin, or
maybe just barely pass, or maybe not pass at all?
- Jennifer Mellone
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
. Or at least have the answers at the end of the document. Having the
printout can let me do this.
- Jennifer Mellone
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, January 04, 2001 12:17 PM
To: [EMAIL PROTECTED]
Subject
some bugs in 5.5.4). But now 5.5.5 is available on CCO.
Maybe 5.5.5 would be good to try. I installed 5.5.5 in a lab environment
and didn't see anything glaringly wrong software-wise when I was getting
familiar with dual MSFC failover and the flexwan.
- Jennifer Mellone
-Original Message
immediately
closed down. I even rebooted the laptop and this did not help.
- Jennifer Mellone
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
GP to load balance. What do you think about all of this?
- Jennifer Mellone
vlan100 T1
pix 1 (10.1)--(10.2,10.4)catalyst6509w/2-msfcs(30.1)--ISPA
| | (20.2,20.4)
| | |
BGP Local Pref is used to control outbound traffic. MED/Metric is used to
control inbound traffic. Why is it that you do an inbound route map (vs
outbound) when setting local pref and an outbound route map (vs. inbound)
when setting MED? It seems opposite.
- Jennifer Mellone
I think it's the thing that looks like a piece of metal masking tape along
the edge/border of the card. The edge I'm talking about is on the section
of the card that you push on when you insert the flash card, not the side
with the pins.
metal "tape"
++
||
|card|
||
++
-pins-
Suppose I set up BGP multihoming from company X site A to 2 ISPs (load
balance). If I decide to additionally set up BGP multihoming from company X
site B to 2 other ISPs (load balance), can I still use company X's ASN or do
I need to get a second ASN? My guess is that I need 1 ASN. Would there
I'm doing the CCNP track now for the next 6 months, but I'm looking ahead.
Assuming you've already had the usual ACRC/BSCN, CLSC/BCMSN, etc. which
course(s) would you take within the next 6 months if you wanted to get CCIE
in the future after completing CCNP:
cvoice, catm, or mscn? or perhaps
I'm debriefing myself within hours of passing this test (my first CCNP
test), so the information I share is fresh in my head. I hope it helps some
folks out there.
The Breakdown:
61 questions, 75 minutes, need 690 (on a scale of 300-100) to pass.
It took me 1 hour, and I'm a slow test taker.
Does anyone know an easy definition of what the atomic aggregate is and what
it does? I do know it is set by default unless the "as-set" command is
used.
- Jennifer
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Please tell me if I am correct:
Distribute lists are defined by standard access lists (vs. extended access
lists). True?
Prefix lists are also defined by standard access lists. True?
- Jennifer
_
FAQ, list archives, and subscription info:
When you redistribute into a protocol, which metric do you use? The books
say use a metric consistent with that of the receiving protocol. The books
say, for example, use 20 when the receiving protocol is OSPF, which is
default. What metrics should you use for the other protocols? Would you
How many route map statements can I apply to an EBGP neighbor? Is it only 1
inbound and 1 outbound?
For example, is this illegal?
router bgp xxx
network a.a.a.a
network b.b.b.b
network c.c.c.c
neighbor d.d.d.d remote-as yyy
neighbor d.d.d.d route-map firstin in
neighbor d.d.d.d route-map
Try control shift 6
- Jennifer
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sean Lee
Sent: Tuesday, September 12, 2000 3:50 PM
To: Cisco@Groupstudy. Com
Subject: How do I break out of traceroute?
Hello All,
What's the key combination to break out
) and the DS3 inbound
(lower MED than T1). Currently on the router the route-maps set both
local-pref and MED inbound/outbound on all circuits! Not very clean.
- Jennifer Mellone, BGP rookie
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ
30 matches
Mail list logo