Re: Linux, terminal emulation for console port

Hi, You can use minicom. Regards Kiarash Chuck Church wrote: > > All, > > My coworker is playing with Red Hat Linux, but he can't find the Linux > command or application for terminal emulation though the serial port, much > like HyperTerminal. Does such a thing exist, or can anyone rec

Strange tunneling

Hi all, I have a 1mbps wireless line between two points. As the wireless has got around 10% loss, I wonder if there is a way to setup a tunnel on the line to get a clear link by sending lost packets again. I should say that L2TP is good but it assumes packet loss as congestion and stops sending

Re: Losing configurations

Hi, Please check your start up config to see whether your changes to the interface has been saved without any problem. I have the same problem with a 3640 voice gateway which the virtual security interface does not come up until I manually retype the commands. But the config in NVRAM is Ok. Re

Re: 2620 keeps rebooting on and on and ....!!!

Type a 'sh ver' after when the router reboots by itself and see in the command's report the reason for the last reboot. Regards Kiarash Niraj Palikhey wrote: > > Hi, > I am trying to figure out what's wrong with a 2620 router that keeps > rebooting on and on and on...Initially, I did the Ctrl-

RE:Masters Degree

Hi! Does anybody have some information about DalHousie university Master of Internetworking program? www.dal.ca/internetworking regards Kiarash John Robert wrote: > > Hi, > > I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP, but > still not satisfied. I have seen different

Traffic shaping

Hi Has anyone worked with traffic-shape command on interfaces? I checked it with an ethernet interface it seems it doesn't work. Actually it restricts the traffic but not to the rate I gave. Is it possible to use it on serial interfaces as well? Regards Kiarash ___

Re: Traffic shaping

> ! > > Hope it helps > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Kiarash Bodouhi > Sent: Tuesday, August 01, 2000 6:10 AM > To: [EMAIL PROTECTED] > Subject: Traffic shaping > > Hi > > Has anyone worked wi

Re: Problem Cleared? Want ot try the Follies Again?

Hello Chunck: Here are the answers. Please correct me if I made some mistakes. One question! Please check that following router does have these two commands and inform me: ip cef rate-limit Thanks in advance :) Router Cisco 2503 , 16M Flash, 16M RAM, IOS 12.1.2 Enterprise Plus IPSEC 56 System f

Re: Problem Cleared? Want ot try the Follies Again?

or all this info. > > Would you mind, if you have a few moments - running another port scan and > telling me what you see now? > > Thanks. > > Chuck > > -Original Message- > From: Kiarash Bodouhi [mailto:[EMAIL PROTECTED]] > Sent: Saturday, August 0

Re: Q on Perl

Teach yourself PERL in 24 days, www.informit.com , www.itknowledge.com Hixon Sgt James R Jr wrote: > > Does anyone know a good foundation book on how to write Perl scripts, and to > start learning them? > Thanks > > Sgt James R Hixon > Network Engineer > MCB G-6 Network Engineering > DSN 645-

Re: Microsoft Radius (IAS)

Two things you should check one is the radius port address which should match to those of the router, second you should use only PAP not CHAP. Cheers Kiarash Tony Russell wrote: > > Has any successfully used Microsoft Radius (Internet Authentication Server) > with a cisco router. If so, what

Re: Losing configurations

inal Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Kiarash Bodouhi > Sent: Monday, July 17, 2000 4:05 PM > To: [EMAIL PROTECTED] > Subject: Re: Losing configurations > > Hi, > > Please check your start up config to see whether your ch

Re: CISCO Simulation

Hi, You can use Zebra at www.zebra.org. Actually it is not just a simulation software. It is a high quality routing daemon which runs under Unix variants and support RIP 1&2, OSPF, BGP,And the most important point is that it is free and open source! Regards Kiarash Ifti wrote: > > Hi all,

Re: CISCO 2511 question

Hi, You can use 2600 series with a 32port high density serial module which can act like a 2511 with 32 async ports. Regards Kiarash [EMAIL PROTECTED] wrote: > > Hi PPL, > > I have this cisco 2511 router which I use as an access server I want to get > something that has faster processing pow

Re: set up a WAN

Hi! You can use Cisco 340 series wireless bridge which gives you around 11mpbs bandwidth and can be use to connect 2048 separate LANs. For the 500 mile one you should find another way like framerelay, satellite link, fiber Regards Kiarash rayza manesh wrote: > > How would you design this?

Re: VOIP Error Desc.

Hi! Here they are: > (cause disconnection 0*10) = Normal call clearing > (cause disconnection 0*22) = No circuit > (cause disconnection 0*15) = call rejected > (cause disconnection 0*11) = user busy regards Kiarash Hasan Abbas wrote: > > Dear All, > Can Anybody can inform me where can I find

Re: VSAT connection

Hi! No problem. You dish is C-band. Just plug the serial cable to your 5300 ( probably v.35 cable ) and set appropriate encapsulation and ip addresses then you are ready to go. Regards Kiarash Yip Chan Keong wrote: > > Thanks Raf, I am more concerned with the interoperability issues between >