AS5300 voip problem [7:16355]

ref = 0x8061 1d18h: Cause i = 0x8090 - Normal call clearing 1d18h: ISDN Se0:15: RX RELEASE_COMP pd = 8 callref = 0x8061 Where you see the Medusa# prompt the call connected and stays connected for a few seconds. Any ideas ? Regards, Mihai Message Posted at: http://www.groupstudy.com/f

Re: AS5300 voip problem [7:16355]

RX DISCONNECT pd = 8 callref = 0x8061 1d18h: Cause i = 0x8090 - Normal call clearing 1d18h: ISDN Se0:15: RX RELEASE_COMP pd = 8 callref = 0x8061 ""Mihai"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > > I have a problem s

dial-on-demand question

think know how to do it, but otherwise... Thanks, Mihai _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: unknown passwords

If you are using HyperTerminal on Windows NT, replace it with the Win95/98 version. The NT version has a bug. "Lopez, Robert" wrote: > > Hello, > > I have a 2501 and 2503 that are password protected (console password and > enable password) and the passwords are not known. I'm following a

Re: HyperTerminal arrow keys

I don't have the HyperTerminal in front of me right now, but I know it has a radio button where you instruct the program to interpret arrow and function keys as terminal keys... Mihai Richard Wilson wrote: > > Hi > > I've been following the discussions about how to

Re: CCNP test order

I passed Remote Access, then Support (weird, I know). My next is Routing. This sequence is because on my hands-on experience. I have never touched a Cisco switch till now. Take the first you feel more prepared to take (but don't begin with Support). Reiterate. Brian Ledbetter wrote: > >

Re: Reverse Telnet to reset modem

Easy. Add the following line to your config: ip host <2000+line#> The line # of Aux is last TTY + 1. For example: ip host modem65 2065 192.168.101.1 Then: telnet To exit: ++<6>, then , then type "disconnect" Hans Stout wrote: > > Hello colleagues, > > I have heard that there i

Re: Sybex or Syngress for CCNP Support Exam

nfo: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Mihai Dumitru Systems Engineer, ROMSYS SA tel: +40 1 2300810, mobile: +40 92 764287 fax: +40 1 2300815 _ FAQ, list archives, and subscript

Re: Need CID exam info

Don't forget IBM/SNA. I've got 10 questions related to this topic. william wrote: > > Hi guys, > > How many question are there in the exam and what is the passing score ? > > Which area should I emphasis on? > > I'm taking this exam on next week. > > Hopefully you'll can give me some inp

Re: NM-1E2W Module

? > > Thanks > Warrick FitzGerald > LiveTechnology International Inc. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Mih

Re: Switching exam

__ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Mihai Dumitru Systems Engineer, ROMSYS SA tel: +40 1 2300810, mobile: +40 92 764287 fax: +40 1 2300815 ___

Re: Ip default route

: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Mihai Dumitru Systems Engineer, ROMSYS SA tel: +40 1 2300810, mobile: +40 92 764287 fax: +40 1 2300815 _ FAQ, list archives, and subscription

Re: where can I download free TFTP server?

> herein and notify the sender immediately by return e-mail. > > == > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct an

Re: port speed

should we manually set it to full duplex? > > Thanks > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- Mihai Dumitru Systems Engin

Re: port speed

Mihai Dumitru wrote: > > This is true for the Catalyst switches with set / clear commands. For > the IOS based devices, you have "speed auto" and "duplex auto". > P.S. It is not recommended to leave the speed and duplex to auto (default). Set them manually.

new Microsoft exams tougher than Cisco's

it's just about the complexity of the questions. I have never understood why Cisco doesn't have more complex questions (scenarios I mean) in its exams. DCN is an exception, but compared with what I saw today, a Cisco exam is quite easy to pass. Mihai

ospf newbie quest

neighbors. Is Hello packet from page 433 an OSPF packet from page 417? or Is the packet on page 417 the LSU, LSR and LSA packet type? Thank you. Mihai **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Assoc

voice teleconference

The customer has its own PBXs and wants to make use of them, if possible. Thanks, Mihai _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: voice teleconference

like to > contract me? :) > No, thanks. Now I know exactly how to do it :) > Z > > PS - an alternative might be www.cisco.com > > >From: Mihai Dumitru <[EMAIL PROTECTED]> > >Reply-To: Mihai Dumitru <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] &g

back to back cable for 2500 series routers

hi, It was a member of this list that make & sell cables used to connect routers back to back through serial interfaces. Can you send me his name / email ? Thx. Mihai ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list arch

CCNA 2.0 Beta exam results ???

By aby chance anyone of you received their results on the exam? I took the test at the end of March and still no news. Is this meaning that I failed it? Thx. Bye. Mihai Iancu ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list

newbie question: frame-relay

ping on both ip addresses of the link. Thx a lot. Mihai Iancu ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

ACL quiz

Hi all, For the gurus: Please make a habit of posting such questions - this stuff is not to be found in books - this is real life. Thank you. Mihai ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription

newcomer to HSRP or fall-back behavior [7:42495]

thing like this? thank you for your help, mihai ps: pls reply also at [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&

how can i erase flash mem for a router which doesn't boot? [7:52677]

hello, hello, i tried to upgrade a 1710 box and i got the "SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!" message. no wi'm trying to go back to the old version which was loaded on the box but i keep getting the same message. here you have some output info from the box - maybe you can com

RE: how can i erase flash mem for a router which d [7:52684]

hi, yes i have the right memory image - i tried also with the original IOS found in the box. i also followed: - tftpdnld procedure - xmodem procedure the router doesn't boot in normal mode. the only way i can work with it is via rommon. yes - i did use the boot command - no result - same beh

RE: how can i erase flash mem for a router which d [7:52677]

yes - i did save the image ... but guess no luck ... same thing ... after tftpdnld and xmodem. if you go to the site you will find that the 48Mb version has enhanced features ... and there is a version which require only 32 Mb. i even tried to load an older version - same thing. thx. Mes