Since I have taken the new exam twice, neither off the exam have any
callculations at all.
Thus I don't see any HEX conversion chart, but may be some people have
callculations in the exam.
-Original Message-
From: Bond, Jeffrey T [mailto:[EMAIL PROTECTED]]
Sent: 16 January 2003 00:28
To:
The exam that I take on Monday 13/1/03 still got a few HSRP question.
-Original Message-
From: David Ristau [mailto:[EMAIL PROTECTED]]
Sent: 14 January 2003 06:03
To: [EMAIL PROTECTED]
Subject: CCNP 640-604 switching exam [7:60987]
Taking the 640-604 switching exam within the next week
:(
I have taken the Switching Exam today, the old CCNP Switching 640-504 from
Cisco Press still can be used. Sadly I still can't pass the exam, just need
one or two more question wright to pass. Funny thou, the set off questions
is not hard but it required us to knows the little things.
I got l
Hai,
I will take the Switching Exam on Monday 13/1/03, any info from takers this
weeks.
I am using the old cisco press switching exams books.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60785&t=60785
--
FAQ, list a
We can refer to a dictionary?, it that true.
Thanks
-Original Message-
From: Kevin Phua [mailto:[EMAIL PROTECTED]]
Sent: 19 November 2002 14:13
To: [EMAIL PROTECTED]
Subject: Re: 640-901 BSCI [7:57599]
I think 105min is the standard time (30 mins additional) if the exam is
taken in non
Hai,
Can this work ?
interface dialer9
ip address 10.0.0.0 255.255.255.0
ip address negotiated
encaps ppp
ppp auth pap
thanks
-Original Message-
From: Nuurul Basar Mohd Baki
To: [EMAIL PROTECTED]
Sent: 10/22/02 6:38 PM
Subject: Asking for a command for dialer interface [7:56074]
Hai
Hai,
I need to find a command that allow my interface dialer with a fix ip to
accept another ip once the ISDN connection is establish. I have no idea
about it and I am looking at the CCO for help. This command will allow my
interface dialer ip to be changed to another set off ip, in order to acc
Hai,
I am having a problem with a ATM network, the Novell Sever is using ATM
Forecard and on its AAL Statis is showing error from receving pakets. While
from the Switch (C100) the particular port have no error stat either tx or
rx. I have swap in a new box with a new MCP with the orig config and
Hai,
I have taken the new routing 603 twice, there are a few questions in the
particular exam that I am unable to get the answer at all.
Is there a way, that I can post a similar question with out breaking the
NDA.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50
Hai,
Can I download and save pdf file from CCO web site or do I need either to
have a diffrent ID and password for that?.
Thanks
Basar
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49623&t=49623
--
FAQ, list archives, and s
Hi,
I have never done any IOS upgrade before, can some advice me on the step.
Is there any hardware limitations to Cisco Image upgradeable like on Bay
router.
Thanks
Basar
-Original Message-
From: John Brandis [mailto:[EMAIL PROTECTED]]
Sent: 25 July 2002 10:50
To: [EMAIL PROTECTED]
Sandra,
try posting at www.tek-tips.com, there is a site for Bay there.
thanks
-Original Message-
From: CARR, SANDRA (JSC-SD) (WLS)
To: [EMAIL PROTECTED]
Sent: 6/11/02 5:10 AM
Subject: configuration for Centillion ATM switch [7:46224]
I have looked high and low for other training mat
Hai,
I just reregister my BSCN Exam to 14/06/02, so far the Prometric did not
advice me that the old exam is gone. If I look at Cisco web and did not
find any info regarding the new 6xx. I still have 3 paper to go. How can I
confirm this with Cisco.
Thanks
Message Posted at:
http://www.g
Hai,
I've recived a config that contain a sound like HSRP on a single router.
The function is for Serial 0 to back up Serial 1 and vice versa.
I am unable to see how does it works :(
Can some help me on this
Interface serial1/1
bandwidth 128
no ip addres
encaps fr
fr lmi-type ansi
interface s
CNP exam? [7:38626]
>
> www.cisco.com/go/certification
>
>
>
> ""Nuurul Basar Mohd Baki"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hai,
> >
> > I am wondering is there any changes on the CCNP exam track or q
Hai,
I am wondering is there any changes on the CCNP exam track or questions
like. I have being busy lately and planning to take again the BSCN exam on
29/3/02. Any information is welcome.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38626&t=38626
--
Hai,
Just take the BSCN Exam for the second time, sadly still fail.
Lots off BGP, EIGRP and OSPF. Spend 60% of the time just to figure out BGP
questions. Heck BSCN is bit tough than I think it was.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32267&t=32267
--
Hai,
BGP, EIGRP and OSPF then VSM and route sumamarization. Might need to check
on RIP and IGRP also. I will take the exam again tomorrow, will give an
update tomorrow
:)
> --
> From: Mnatzakanian Serge[SMTP:[EMAIL PROTECTED]]
> Reply To: Mnatzakanian Serge
> Sent:
Hai,
I have forgoten the password for my Tracking System and currently the email
that I have given was no longer valid. Is there any way that I may be able
to get my current password revoke ?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31831&t=31831
--
Hai,
I just created a lab for OSPF using Bay and Cisco Router. The set up is as
follow :
interface Serial0
IP address 202.178.70.89 255.255.255.0
encapsulation frame-relay IETF
no ip mroute-cache
clockrate 64000
frame-relay map ip 202.178.70.90 104 broadcast IETF
frame-relay interface-dlc
Hai,
I am trying to change a read only access to read/write on an ARN.
the command that I am typing is as below
[1:1]$ set wfsnmpcommEntry.wfsnpcommAcess.1 2
set: Invalid obj.attr.inst specified
[1:1]$ commit
[1:1]$
It do not work, I know that I have done some typing error here :(
Can s
Hai,
I just taken BCRAN 20/11/01, on my exam there was no Cisco 700. Even when I
took the BCRAN tranning from cisco tranning center, they skip the subject.
> --
> From: [EMAIL PROTECTED][SMTP:[EMAIL PROTECTED]]
> Reply To: [EMAIL PROTECTED]
> Sent: Wednesday, Novembe
Hai,
I am doing a lab with 1 Cisco 4000 that will be connected to 3 Bay ARN.
Is there any one who can tell me what type off cable that I need to get in
order to make the connection works.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26971&t=26971
---
Hai,
Thanks for the help, I just past BCRAN. Sadly thou with a very low passing
marks. Now next exam is BSCN before retaking back switching.
Nuurul Basar Bin Mohd Baki
Senior Customer Engineer
Technical Support Department
Solsis (M) Sdn Bhd
Suite 5.02 Wisma Academy
No 4A Jalan 19/1
46300 P
Hai,
I have a similar problem with Bay Advance Remote Node (ARN). I need to do a
password recovery on it
This is the suggestion given by Nortel tech support
> ARN password removal
> Fact: ARN
> Symptom: If a customer has forgotten his Manager password for the ARN
> Fix: Do the following steps:
>
Hai,
I am going to take the Bcran exam on Tuesday 20/11/01. Hopely I will pass
this exam. Can some one who have just taken the exam advice me on some
informations.
a) Is there many PAT Q, since I have nil exposer to it at all
b) Tacas/Radas, how deep should I knows
While on the BCRAN Course, th
Hai,
I am wondering if there is some one who have impliment Dynamic Vlan using
URT server. Currently our Dynamic Vlan project with URT works fine with NT
logins. All the user was able to change the IP and Vlan ID according to the
correct settings. Sadly the Novell IPX did not changes, user is cu
Hai,
I agred with you :)
This is a Cisco Networking Forum and should stay that ways.
New people here may stay away just because of this type of arguments.
Thanks
Nuurul Basar Bin Mohd Baki
Senior Customer Engineer
CCNA, MCP
> --
> From: Marshal Schoener[SMTP:[EMAIL PRO
Hai,
I have a poblem with Dynamic Vlan using Cisco URT.
After the user login to Win Nt domain, the URT server will dynamically move
to the user the specify Vlan thus changing their IP address as well.
After user join their own Vlan, Novell Client could not find the server
anymore. This is becau
Hai,
My best suggestion is :
Sybex CCNP All 4 off them plus the Cisco Press CCNP books. I belived Sybex
books is less technical writen than Cisco Press Books, so if you are having
less real time with Cisco Router Sybex is better.
Nuurul Basar Bin Mohd Baki
Senior Customer Engineer
Technical
Hai,
Thanks for the WUG, I have download and now testing it. It is a good tool
for Small Medium Company. Price is cheap to.
Thanks again to every one that respond to my email. I'm sorry that I don't
remeber all but thanks again.
:)
-Original Message-----
From: Nuurul Basar Mo
Hai,
Can you give me the url for this WUG product.
Thanks
Nuurul Basar
-Original Message-
From: Ouellette, Tim
To: [EMAIL PROTECTED]
Sent: 10/26/01 8:28 AM
Subject: RE: OT- maybe... [7:24121]
What's Up Gold (WUG) isn't that bad and it's much cheaper.
It's just a pinging machine to se
node.
Any good or bad feedback on the product is most welcome. Currently the
customer that we are about too perpouse the product is running on NT
Enviroment with 8 cisco router, 6 of em are 1700S and the rest are 2600s.
Thanks
Nuurul Basar Mohd Baki
Message Posted at:
http://www.groupstudy.com
33 matches
Mail list logo