Hi guys,
Apparently one of friend who attempted his CCIE couple of months ago
came to me and ask me about configuring a menu in a router.
I do not know or intend to disclose/violate any NDA but just out of
curiousity, whereabout I can find some useful reference?
My idea is creating some kind of
Hi all,
Just want to tell you all that I finally attempted my first lab on 28/11.
What an experience for 2 years in networking line (newbies) after completing
all my NA/NP certification and finally now turning to the lab. I knew I
didn't
do a good job there though the result have not been
Hi all,
Just want to tell you all that I finally attempted my first lab on 28/11.
What an experience for 2 years in networking line (newbies) after completing
all my NA/NP certification and finally now turning to the lab. I knew I
didn't
do a good job there though the result have not been
Don't you think fixing up the router-id in this scenario is
better to ensure consistent virtual link and since
you keep rebooting the router?
Just an opinion. :)
Regards,
Ryan
-Original Message-
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 23, 2001 10:06 PM
Take it offline and drop me a mail.
Regards,
Ryan
-Original Message-
From: johan ericsson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 23, 2001 10:04 PM
To: [EMAIL PROTECTED]
Subject: Partner Specilization [7:23890]
Hi!
The company I work for is a cisco premium partner. As I
Hi!
I guess this question might shoot up several times, but I'm trying my luck
here if someone could point/reforward back the similar question earlier.
My question scenario is summarizing and redistributing OSPF /25 or above
mask
into IGRP route. As we can see here, the IGRP might advertise and
Look at the link speed in your bridge (was it BR340 or WGB340?).
Main difference on 19xx and 29xx was the density, force your bridge
to match the speed of the link rather than use auto. Make sense to me
all the time. :)
Ryan
-Original Message-
From: Sites, Bob [mailto:[EMAIL
Steven,
1) Distance/weather/LOS affect your transmission rate. Find out the exact
rate
in distance against the losses at
http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/obrc_in.xls
2) Typically 90m @ open environment @ 11Mbps or 400m/open/1Mbps
3) Yes if multicast is turned
Yes there is.
The best I've heard on bandwidth management is packetshaper aka packeteer.
Others include Allot, Sitara, TopLayer, Cisco NBAR (Network Base Access
Recognition),
Cisco IOS QoS, NetReality, CheckPoint Floodgate and Xedia Access Point (part
of Lucent).
Good luck in your research. It
Hi!
I have the following scenario with regards to the design of 2 sites
connected
via dishes as a backup. The satellite dish is connected to the router's
Ethernet port
so when one of the ISP A/B is down, the whole site will fail over to the
other site
via satellite link. Here's the diagram for
Hi!
I have a couple of question with regards to the security attack (for
beginners
like me!), if you suspect this will happen to you. Say you have a PIX with
cisco
router, your inbound traffic is very high and the PIX logs is filling up
with
lots of port scanning, connection drop, DoS attack,
Alternative, try Agilent Advisor Software (yes! Software version of the
previous HP Network
Analyzer) at the following URL.
http://onenetworks.comms.agilent.com/agilentadvisor/J1955A_download.asp
45 day trial, not bad though.
Ryan
-Original Message-
From: Steiven Poh-(Jaring MailBox)
Similar problem here when using new FLASH which is not formatted.
Try this, go to ROMMON and do the TFTP download from ROMMON.
After reboot should solve the problem.
Good luck.
Ryan
-Original Message-
From: Alejandro Pelaez [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 27, 2001
2nd reported bugs on 802.11.
http://www.cs.rice.edu/~astubble/wep/wep_attack.pdf
Ryan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=17091t=17091
--
FAQ, list archives, and subscription info:
Just a news to everyone from my channels manager.
Cisco may take away the trade in program as you all might
know. The official news might release by 20th August 2001.
Regards,
Ryan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16243t=16243
Sorry this is a little bit off the topic.
Just wish to know if anybody out there knows an appliance/boxes
(independent)
which could prevent anonymous users to use the mail server to relay their
mails.
This by all mean regardless what OS/Mail server is running, this device is
capable
to intercept
Hi,
I knew that the driver above is no longer available in any website
(including Cisco).
Does anyone still have the above driver for Novell client (whichever load
the LSL.COM
and Net.cfg)?
Regards,
Ryan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15212t=15212
Sorry, this is a little bit off the topic.
Does anybody have recommendation tools to monitor the server disk space, CPU
or memory
utilization? I believe HP NNM have similar feature whereby the server is
running on SNMP daemon.
Can I use some similar tools to access to the mibs in the server?
Scheduled on 28/11 29/11. Anyone?
-Original Message-
From: Omer Ehsan Dar [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 15, 2001 3:09 PM
To: [EMAIL PROTECTED]
Subject: Re: CCIE Group in Singapore. [7:12253]
David you are sooo right I am schduled on the 21st and 22nd of Feb 2002
and
Yes, you can skip the question provided you had mark the question for
review. Else before the end of the question, you could press the
reverse button to scroll back all the 100 question (imagine).
Regards,
Ryan
-Original Message-
From: tim [mailto:[EMAIL PROTECTED]]
Sent: Wednesday,
other end to see if that is blocking.
Regards,
Gaz
Ryan Ngai Hon Kong wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I have about 18 C3548 switches with UTP cross-over as a redundant
link
to
the core C6009 switches (1 unit) and the producti
Hi,
I have about 18 C3548 switches with UTP cross-over as a redundant link to
the core C6009 switches (1 unit) and the production link of LX SX GBIC.
When the production link is in operation, all the GBIC ports is in
forwarding
state. However when I attach the redundant UTP cable at 1 C3548 to
Relief again,
Good luck to the rest of the candidate for written.
Though my mark is low (72%), kind of happy with it.
Material used:
- TCP/IP Routing (get use to OSPF,RIP,EIGRP,IGRP,BGP)
- Boson
- Token Ring whitepaper (please do the exercise!)
- Cisco Website (search engine was extremely
To: [EMAIL PROTECTED]
Subject: RE: Past my written on 3rd attempt. [7:10062]
Hi,
May I know where to download the Token Ring whitepaper?
At the same time the practice the exercise.
Thank you in advance.
regards
Steven Quek
-Original Message-
From: Ryan Ngai Hon Kong [mailto:[EMAIL
Hi,
Out of curiousity, one of my respective pre-sales ask me this set of
question
and it triggers my mind whether this is feasible to implement.
Assuming there is only 1 router with 1 ISDN card (regardless what IOS/Model
it is),
where 2 Dialer profile is configured for 2 separate ISP. The
Hi all,
I guess I'm repeating this question again. But hopefully someone could point
how do I go about this.
Initial Syn, host A send out this number. Size=512, Seq = 1234 ACK=333
and B reply Size=1024, Seq=5435 ACK=444. What would A reply/see?
I guess the Seq and ACK should be incrementing
Does anyone know what is the major different between restricted and
unrestricted in PIX licensing?
What's the maximum session in restricted license as compare with
unrestricted?
Best wishes,
Ryan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=6701t=6701
Same with the A/M passing marks 80%.
Ryan
-Original Message-
From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 24, 2001 7:26 AM
To: [EMAIL PROTECTED]
Subject: Re: Wireless LAN specialization [7:5575]
James,
The exam for Account Managers has 25 questions and the pass is
Cat5505 with LANE module (A B PHY), 1 x 24 port module, 2 x 12 port
module, SUP II.
There's a Hitachi ATM switch pre-configured with 3 ELAN (eg: demo1, demo2,
demo3)
with only 1 ATM server address given which we can't play around with.
My attempt:
a) Configure 3 VLAN (10.1.1.1, 10.1.2.1,
Good day,
I had attempted the written exam today and flung it with 59% score.
Surprisingly I miss 10 question on Token Ring where I found that the Token
Ring
white paper by Lou Rossi is not sufficient for preparation.
Does anyone have more reference for this ancient technology?
Regards,
Ryan
--- Original Message -----
From: "Ryan Ngai Hon Kong"
To:
Sent: Tuesday, 17 April, 2001 22:15
Subject: Wireless question. [7:1034]
Guys,
Hope you don't mind helping me with this.
1) What is the purpose for including a fade margin of 10 dB into the
antenna
calculation utility?
Guys,
Hope you don't mind helping me with this.
1) What is the purpose for including a fade margin of 10 dB into the antenna
calculation utility?
a. To increase the distances achieved
b. There are no discernable differences by including a fade margin or not
c. To offset weather conditions
It can't be done with 10MB interface LAN in the router.
For example: Cisco 1600 series and 1700 series is not capable
for VLAN routing (although 1700 series has 100Mb interface).
Good luck.
-Original Message-
From: Gareth Hinton [mailto:[EMAIL PROTECTED]]
Sent: Sunday, March 18, 2001
I'd took my CVOICE ver 1 training in S'pore 3 weeks ago.
According to the instructor the CVOICE 2.0 is basically
a subset of CVOICE 1.0 but their material are much more
organized. However in the CVOICE 2.0 exam, you can expect
the question more towards PBXes (told my the instructor).
Taking the
Feels like the most wonderful gift on Christmas, a new title on my forehead.
CCNA on August 2000
CCNP on today, 22nd December 2000
Thanks everyone.
Ryan
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Does anyone know if Cisco PIX could provide redundant or fail-over, work
hand-in-hand with HSRP?
Ryan Ngai @ ENT
E-mail: hkngaiExt:6805
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Hi,
Does anyone have experience configuring the HP LanProbe III (RMON 1) with
Traffic director 8.1?
I had install the lanprobe with an IP and as an agent. When I test the
probe, it returns
the following string.
General info:
IP Address: 10.1.5.106
Ping: Not supported
Read Community: "public" OK
Ryan Ngai @ ENT
E-mail: hkngaiExt:6805
-Original Message-
From: Ryan Ngai Hon Kong
Sent: Tuesday, October 17, 2000 12:00 PM
To: '[EMAIL PROTECTED]'
Subject: Firewall in ATM environment (design question).
Hi guys,
Just another design question.
- non cisco ATM
17, 2000
10:24 PMTo: 'Ryan Ngai Hon Kong';
'[EMAIL PROTECTED]'Subject: RE: Firewall in ATM environment
(design question).
Ryan, What sort of Internet link do
you have..what speed? What model router do you have at the
internet. You may want to just put the Firewall Feature Set
39 matches
Mail list logo