possible?
Would someone on this list care to comment on this and let me know how to go
about doing that?
Please let me know. I am sure that are many on this list who would be
interested as well.
Thanks
Tan
- Original Message -
From: "Wojtek Zlobicki" <[EMAIL PROTECTED]>
To: &
Read Chapters 6,7,8 from Enhanced IP Services for Cisco Networks by Donald
Lee
before you read anything else.
- Original Message -
From: "whatshakin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, October 21, 2000 3:58 PM
Subject: Re: Beta Results areout on Cisco Secure VPN..
Would a 3550 SMI (much cheaper version than the 3550 EMI) be comparable to
the 2950 for filling out a R&S lab? It seems the lower 3550 and 2950 are
very similar.
I think an important point is whether the enhancements in the EMI over SMI
versions of the 3550 series will be tested in the lab? SMI h
If you have an arp entry for a corresponding IP address that hasn't existed
for a year, something is keeping it in the cache. Could the timeout value be
set to never time out? I see in your output the timeout value is set for a
couple hours so easy to dismiss the thought, but is this for every
inte
I am not quite sure what the original poster meant by where did the pages
go? What link were you using that isn't working now.
1. I have this in my bookmarks for tech notes and it still works. It is
distinctly different interface than below. This heirarchy is listed down
center of page.
http://ww
2 sites are connect to each other by ISDN Bri. Both are configured to =
react by Dialer profile. Both links are ok and connected but when =
performing a ping test to each other, the following had been observed. =
Pinging from ethernet port to destination dialer interface produces a =
very stable a
Hi, I just took the BCRAN, last Wednesday, passed with 808, there wasn't
much on the 700 series router, but do know more about modems.
--
Regards,
John
""Cisco Kidd"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Are there any questions on the 700 series(Chapter 9 in the BCRAN
Top Down Network Design
--
Regards,
John
""Dan Evensen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What books should I use for CCDA? What is your opinion on this book. CCDA
> exam certification guide / A. Anthoony Bruno, Jacqueline Kim.
>
> Dan Evensen CCNAWS-CNS
>
I had problems using Microsoft DNS servers and PIX. It would work for about
a week before I had to reboot the PIX. Cisco could never tell me what was
wrong and I finally resolved it by installing BIND to forward all external
queries.
Leonard Tan
- Original Message -
From: "L
Anyone from Singapore studying for CCIE Lab ? Schedule to take my lab this
November. Would like to form a study group to pool resources together.
Thanks.
Ron Tan
[EMAIL PROTECTED]
Get free email and a permanent address at
What does "route-map nonat" do?
ip nat pool BRASIL x.x.x.x x.x.x.x netmask 255.255.255.192
ip nat inside source list 10 pool BRASIL overload
ip nat inside source static 192.168.25.5 x.x.x.x
The "source list 10" would refer to an access-list allowing and denying
certain ips
Regards,
John
""Leo
David,
Don't worry it's my first too... if you're getting flogged, I be getting
it as well.. ;-)
Ron
Date: Fri, 13 Jul 2001 13:39:12 -0400
From: "David Schaer"
Subject: Re: CCIE Group in Singapore. [7:12253]
Kevin,
If I score too low should I expect to be flogged?
Dave
Message Poste
wantz"" wrote in message
> >> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >> > Hi Ronnie,
> >> >
> >> > I'm from one of the major ISP's in Singapore. What about you?
> >> >
> >> > Kevin
> >> >
> >&g
looks like you've got the code red worm running wild on your network.
Refer to:
http://www.cisco.com/warp/customer/63/ts_codred_worm.shtml
- Original Message -
From: "cslx"
To:
Sent: Saturday, August 18, 2001 9:56 PM
Subject: please tell me what is "ip input" process?it cost me more t
Forgot to add, unless you are lucky enough to be running IOS 12.1 and above,
forget about NBAR and do it the hard way.
Cheers.
- Original Message -
From: "Erick B."
To: "Ron Tan" ;
Sent: Saturday, August 18, 2001 11:32 PM
Subject: Re: please tell me what is "
le to see certain traffic that are from a single
source to multiple different destination on port 80 (reflected as 0050 under
destination port).
4) Get out there and patch the infected host !
Good luck.
- Original Message -----
From: "Erick B."
To: "Ron Tan" ;
Se
Hi,
I'm looking for a way to upgrade my 4000 via console as well. Let's keep in
touch.
Ron
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31927&t=31899
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Count me in.
[EMAIL PROTECTED]
Hi,
My yahoo id is
lanringcom
Regards,
Ron Tan
Looking for Lab test permit in Sept or at the end of August.
Tony
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EM
Hi all,
Does Cisco's Voice Boxes such as AS5300 and the
3660s able to handle polarity reversal in certain countries that implement it ?
Please advise. If no, then does anyone knows what equipment that can perform the
role of reversing the polarity sent by the telco switch ?
Thanks,
Ron
After reviewing the Routing 2.0 Guide annouced by cisco, I wonder whether
cisco will test any aspects concerning IPX/SPX, appletalk, DDR etc, items
listed in ACRC guide.
Anybody has practical experience?
Thanks in advance!
Tony
___
UPDATED Posting Guidelines: h
Hi All,
I would like to know whether we still can use "Cisco CCNP Preparation
Library (boxed set)- Oct 1999" as study material or preparation for CCNP 2.0
Certification?
Thanks.
Regards,
Murphy
Get Your Private, Free E-
I would like to know whether we still can use "Cisco CCNP Preparation
Library (boxed set)- Oct 1999" as study material or preparation for CCNP 2.0
Certification?
Thanks.
Get Your Private, Free E-mail from MSN Hotmail at h
An application for this would be if you have a server with a global ip
address assigned to it in your DMZ, then you don't want your PIX to
translate your global from the outside.
static (dmz,outside)157.157.146.13 157.157.146.13 netmask 255.255.255 0 0
Another case would be an intranet server, al
For static(inside,outside), I remember doing this in our lab where two PIXs
connect one after the other. Disabling NAT static(inside,outside) for the
transition network would simplify things.
I guess you might just see this setup in a production network. Ü
Message Posted at:
http://www.groupstudy
Maximum Number of Encrypted Tunnels
Up to 100 encrypted tunnel on a 1700, up to 300 tunnels on Cisco 2600, up to
800 for 2650 with AIM-VPN/ EP, up to 800 tunnels for the Cisco 2600XMs,
2691, and 3725, up to 800 tunnels on Cisco 3620 and 3640, and up to 2,000
tunnels on Cisco 3660 and 3745.
http
g the 2 boxes parallel together ?
Comments welcome.
Regards,
Ron Tan
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49670&t=49670
--
FAQ, list archives, and subscription info: http://www.groups
or 30-40% cheaper, I
guess lots of ppl will be rushing off to buy it.
Guess might as well I pack my bags for China to get a new set of
certifications.
Ron Tan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49778&t=49778
--
n is 1.8
Quidway_R3600#
I will be trying to get the Huawei to interconnect with the Cisco 4000 and
we'll see if they speak the same language. Let me know if the group is
interested and will post the results.
Regards,
Ron Tan
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstu
Hi group,
Thought this might benefit some of you. LittleRack.Com, a virtual rack
provider, is having a September promo where a full-day slot cost only
US$10.00. You might want to go over to http://www.littlerack.com to have a
look.
Ron
Message Posted at:
http://www.groupstudy.com/form/read.p
try www.fatkid.com
>From: "rtc" <[EMAIL PROTECTED]>
>Reply-To: "rtc" <[EMAIL PROTECTED]>
>To: "Cisco" <[EMAIL PROTECTED]>
>CC: "CISCO GROUPSTUDY" <[EMAIL PROTECTED]>
>Subject: Hutnik's CCIE LabGuide--any books as good?
>Date: Mon, 5 Mar 2001 10:04:19 -0500
>
>The only best book I thought was Hut
.
Choh Koon, Tan
Systems Engineer
CCNP,CCDP
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
Hi,
First, my apologies if the question makes no sense at all as I am just =
evaluating it's possibility. I am also fairly new to CISCO stuff (only =
got my CCNA a month ago) so your advise on this will be very helpful =
although it is off-topic.
I am thinking of writing some small programs wit
Hi,
I have been looking at the sniffer output and found that my router keeps
sending out a "LOOPBACK" packet whose source and dest mac address is the
router interface itself. It is sent periodically at 10 sec interval. Any
way to turn this off?
Sorry that it is not a study question.
Cheers,
C
Hi,
Are the processors in the CISCO routers commercial off the shelf chips, eg
power pc chips, or are they in-house products?
Thks.
Cheers,
Chee Leong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4686&t=4686
--
FAQ, list ar
Hi,
I have been thinking abt it and couldn't figure out so hope I can help some
pointers from this group. Sorry if the question sounds silly.
I do understand what a gateway is for but when it is configured in a router,
what exactly happens?
Will it do the same if I make an entry in the route t
Hi,
In a small LAN with two routers I found the following MAC addresses
appearing.
00:00:00:00:00:01
ff:ff:ff:ff:ff:ff
Most of the time I see it coming from the routers. Is there a special
meaning to this? Pardon me for my weak networking knowledge.
Cheers,
Chee Leong
Message Posted at:
Thanks Dennis for your great information. Much appreciated.
>From: "Dennis Laganiere"
>Reply-To: "Dennis Laganiere"
>To: [EMAIL PROTECTED]
>Subject: RE: Dennis Laganiere's rif examples [7:36228]
>Date: Wed, 20 Mar 2002 01:40:08 -0500
>
>Hello all...
>
>I finally took the time this weekend to pu
hey, today is not 1st of April !!!
Wake up my friend
>From: "B Rudy"
>Reply-To: "B Rudy"
>To: [EMAIL PROTECTED]
>Subject: JUNIPER TO BUY CISCO [7:40056]
>Date: Mon, 1 Apr 2002 12:27:28 -0500
>
>JUNIPER IS MAKING A BID TO PURCHASE CISCO SYSTEMS THE COMPANY WILL
>EVENTUALLY BE CALLE
Hi Groups,
anybody know about CCIP ?
Is this cert valueable compare with CCNP?
tia.
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1
good article is in Cisco World :
>
>http://www.ciscoworldmagazine.com/index.shtml
>
>;)
>
>On Wed, Jul 25, 2001 at 03:13:06AM -0400, Ben Liang Tan wrote:
> > Hi Groups,
> >
> > anybody know about CCIP ?
> > Is this cert valueable compare with CCNP?
> >
> > tia.
> >
Pls check to your telco service provider, I believe there's a loop on their
FR switch.
cheers-
BL Tan
>From: "Telemachus Luu"
>Reply-To: "Telemachus Luu"
>To: [EMAIL PROTECTED]
>Subject: Frame Relay help please .. thanks [7:29002]
>Date: Wed, 12 Dec 2
Dave,
when you said "multi IP routing protocols" does it mean a router runs RIP,
EIGRP, OSPF/BGP within 1 or more interfaces?
TIA.
BL Tan
>From: "MADMAN"
>Reply-To: "MADMAN"
>To: [EMAIL PROTECTED]
>Subject: Re: OSPF or EIGRP [7:28966]
>Date:
Marc,
Since you're here, need to comment.
I believed that your labs are great for those who will take the lab, but
could you please consider that $650 is too expensive expecially when I'm in
poor Asian country but had a DREAM TO BE CCIE.
Ben Liang Tan
(Still trying to get 4 ma
I'm more than interested. Thanks Brad.
>From: "Brad Ellis"
>Reply-To: "Brad Ellis"
>To: [EMAIL PROTECTED]
>Subject: Custom Telnet Application [7:31889]
>Date: Mon, 14 Jan 2002 15:31:35 -0500
>
>Would anyone be interested in using a custom telnet application that has
>some built-in macros? (sh
Hi,
you need a BNX software to enable frame relay switching.
Ben Liang Tan
>From: "Bill Pearch"
>Reply-To: "Bill Pearch"
>To: [EMAIL PROTECTED]
>Subject: OT: Nortel BLN cross over to Cisco routers [7:32253]
>Date: Wed, 16 Jan 2002 22:25:59 -0500
>
Hi,
I had Hub site where I would have 2 units of 1720
router, one is for leased line to ISP and another for the ISDN DDR to remote
spokes.
PCs
---e0--RouterA---
ISP
|
|
Hi,
Thanks a lot.
- Original Message -
From: Mohamed Abubakkar Siddiqu <[EMAIL PROTECTED]>
To: Tan Choh Koon <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, July 18, 2000 3:52 PM
Subject: Re: 2 routers - 2 gateway
>
>
> There are two ways
>
Hi,
Thanks for answer.
- Original Message -
From: Priscilla Oppenheimer <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, July 19, 2000 12:15 AM
Subject: Re: 2 routers - 2 gateway
> Are Router A and Router B running a routing protocol? If yes, then it will
> work. Just set t
want to take long break later go for CCIE
written.
How many questions in ccie writen & how many exam to take ? except the lab.
Choh Koon, Tan
Systems Engineer
CCNP,CCDP
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives,
about the ISDN/Asyn backup the leased line, never heard how to
configure Asyn to backup the ISDN line . Any ideal ?
I knew it a bit crazy, but like your to help me.
Thnaks a lots.
Choh Koon, Tan
Systems Engineer
CCNP,CCDP
___
UPDATED Posting Guidelines: http
Hi all,
Do anyone know the theory why 100Mbps Hub with Multimode fiber link, the
distance is 412 m for Half Duplex and 2000 meter for Full Duplex mode ??
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscriptio
ISDN have 2 B channels, only one channels is use to sending data while
another is idle, except it is configure for load balancing then both
channels is used.
It is possible to configure 1 B channel for dial to site A and oanother
channel for site B ,without to have two physical ISDN line.
Hi,
How can I view the real time dialing status of the ISDN on the Cisco router.
The show isdn active/history ..do not show whether it is dialing or
disconnecting.
Thanks
Choh Koon, Tan
CCNP
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list
interface card ( WIC-1T) or
some of Cisco 2500 series.
Syn interface normally is used for leased line connection up to T1/E1. Asy
interface is for modem dial up and limit to baud rate of 115kbbps
Choh Koon, Tan
CCNP
___
UPDATED Posting Guidelines: http
Hi
I had manage to configure the DDR profile to make connection out. Later I
was changing the dialer profile to use dialer map command instead of dialer
string command. I got this error message from debugging and it never dial
out. What's wrong ? I had the dialing number in the dialer map.
Th
Hi all,
As far as I knew is the Dialer pool, pool-member command allowed us to
assigned a number of dialer profiles to a physical interface.
Dialer rotary-group is only aassign One Dialer profile to one interface
only.
I had int Dialer0 which is configure to dial to remote office and Dialer1 i
Hi,
I had 2501 router, 1 Ethernet , 2 Syn port and 1
Aux port.
I like to coonect the 56k dial up modem to serial 0
, and configure it to DDR to ISP.
My question is how do i configure the serial 0 (
syn interface) to dial out ?
As far as i knew only asyn serial, Aux port and
syn/async
Hi,
Try to share with all off you. While doing my CCNP
, configure router for DDR is look like easy task, but when do it live then I
encounted some problem.
Look at this command that casue the router can't
authenticate.
wchm-gw1(config-if)#ppp pap sent-username xyz
password 7 x [ E
I am current using Cisco Press DCN book to prepared
my CCDA. I had heard that some ATM question also appeared in exam, does it true
?
Does any other questions that do not appear in
the objective is ask in the DCN exam ??
C.K.Tan
CCNP
Hi,
I had 2501 router, 1 Ethernet , 2 Syn port and 1
Aux port.
I like to coonect the 56k dial up modem to serial 0
, and configure it to DDR to ISP.
My question is how do i configure the serial 0 (
syn interface) to dial out ?
As far as i knew only asyn serial, Aux port and
syn/async se
Hi,
I had connected the US Robotic Sportster modem to
the 1720 Aux port, but router cannot detect the modem. I had used correct cable
as what manual shown.
What I am not aware off ?
line con 0 transport input noneline
aux 0 autobaud modem InOut modem autoconfigure
discovery stopbits
Tan
CCNP,CCDA
- Original Message -
From: Kenny Sallee <[EMAIL PROTECTED]>
To: Feliz, Edgar <[EMAIL PROTECTED]>; Tan Choh Koon
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, June 28, 2000 1:42 PM
Subject: Re: AUX - Dial up
> There are certain dip swit
Hi,
Use this command :
ip address negotiable
- Original Message -
From: Michael Fountain <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, June 29, 2000 4:34 AM
Subject: Re: Analog Dial Backup
> I haven't this yet, but plan to shortly -
>
> Cisco has so
Sorry it should be , ip address negotiated.
- Original Message -
From: Tan Choh Koon <[EMAIL PROTECTED]>
To: Michael Fountain <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Thursday, June 29, 2000 9:25 AM
Subject: Re: Analog Dial Backup
&g
t cisco-default started.
12:40:55: CHAT5: Chat script cisco-default finished, status = Connection
timed out; remote host not responding
12:40:55: Async5 DDR: disconnecting call
Choh Koon, Tan
CCDA,CCNP
___
UPDATED Posting Guidelines: http://www.groupstudy
Hi ,
I had 2 unit 1720 router configured for DDR. I
found some bug on dialer-list command.
Router 1 had no problem to initiate the DDR when
souce is 10.10.10.11 or 10.10.10.90.
But Router 2 had problem to intiate the DDR from
network 202.190.x.0 and 10.10.10.0 to netowrk
10.10.11.0
= 8 callref = 0x90
07:23:07: Cause i = 0x8292 - No user responding
07:23:30064771072: ISDN BR0: received HOST_DISCONNECT call_id 0x8010
07:23:30064771072: ISDN BR0: Event: Call to 87321229 was hung up.
Choh Koon, Tan
CCDA,CCNP
___
UPDATED Posting Guidelines: h
t had been set by default at Cisco 2500 but not Cisco 1720 IP Plus
IPSec 12.0(5) T
Then I am wondering there are a lot of setting by default in Cisco IOS, how
can we view it ?? It never shown on Config file ?
Choh Koon, Tan
CCDA,CCNP
""Tan Choh Koon"" <[EMAIL PR
Hi,
Here you go the config file, please take note on the 'dialer-list' section.
It suppose to be "dialer-list 2 protocol ip list 101 "
But it does not work, i dont know why...so I use "dialer-list 2 protocol ip
permit' and it works.
hkl#sh config
Using 1797 out of 29688 bytes
!
version 12.0
s
Hi,
Here is the url.
http://www.cisco.com/public/sw-center/sw-internet.shtml
Choh Koon, Tan
CCDA,CCNP
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michel, Robert
Sent: Monday, July 03, 2000 10:23 PM
To: Cisco Groupstudy (E-mail)
Subject: TFTP
, then only the 3nd call traffice can make the
connection.
Thanks
Choh Koon, Tan
CCDA,CCNP
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and
www.boson.com
- Original Message -
From: "lenny lim"
To:
Sent: Friday, March 21, 2003 3:23 AM
Subject: what kind of simulation on BSCI [7:65869]
> i was wondering if anyone could give me some ideas on what kind of
> simulation questions whould the BSCI exam come out?
Message Posted
count me in too..
-Original Message-
From: Tonton Rabena [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 04, 2001 9:25 PM
To: [EMAIL PROTECTED]
Subject: Re: how to build a pix firewall out of a PC box. [7:18335]
count me too..
""Richard"" wrote in message
[EMAIL PROTECTED]">news:[
Hi,
Use RADWARE link proof or F5 BIGip to load balance your PIX and
router.
Regards
Guan Boon
> -Original Message-
> From: LB [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, May 25, 2000 1:53 PM
> To: [EMAIL PROTECTED]
> Subject: Q:PIX with multiple outside routers
>
> Hello G
76 matches
Mail list logo
