Hammed,
The Cisco as5350 has 3 slots which u can populate with that no of different
modules. It can support up to 8 E1 ports. I have a box with the exact
configuration for the requirement you describe. What you need is basically:
1 as5350 chassis
1 8-PRI module which gives you 8 E1 lines
2
Hello All,
Can someone pls tell me how I can allow pings and other traffic thru the
PIX? I've added both access-list and conduits for testing. Can ping from pix
to a test PC on LAN, to Internet router and to UUNet DNS but not from test
PC thru PIX as per below:
PIX# wr t
Building
Hello,
Can someone pls tell me why I wont have the access-group command on eth and
fa interfaces of a router? I was trying to configure NBAR on a 7200 Internet
router. I upgraded from 12.0(5) to 12.2(6), did ip cef, defined a class-map
and applied it to a policy-map, I applied the map as
or suggestions on resolving same to oneself, instead of
wasting valuable bandwidth.
I am not given to subtle undertones, so I will add thankfully, that you let
moderators decide what can be discussed.
Tunji
From: Peter van Oene
To: Tunji Suleiman
Subject: Re: Routing and Design Problem [7
sounds like you might want to hire a consultant.
Thanks for your suggestion, but I'm trying to play at being the consultant!
Since I'm getting no cooperation from the ISP, I have modified my config to:
1. Use global address 80.80.80.171-4/26 on router WAN link to ISP a la
regular proxy
Hi Group,
I am trying to deploy a VPN solution and ran into a seemingly simple problem
which I cant seem able to resolve. I terminated the radio link from the ISP
on fa0/0 of my Cisco 2621 router. I connected fa0/1 of 2621 to e0/0, the
outside of my PIX 506 by cross cable and connected e0/1,
Hi Group,
I have a routing problem. I am certain my present config is alright and just
need a routing entry from the ISP for things to work. But the ISP is not
cooperating, insisting the problem is with my config. So I want to make sure
I've not explored all options b4 reverting to them.
How do u run a scan on a router interface?
Regards
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: IOS upgrade/Strange services [7:53492]
Date: Tue, 17 Sep 2002 16:02:02 GMT
I've recently upgraded one of our routers to 12.2(11)T - IP/FW/IDS/3DES.
After
Let's see config for gatekeeper and unregistering gateway.
Tunji
From: Alfredo Pulido
Reply-To: Alfredo Pulido
To: [EMAIL PROTECTED]
Subject: Problem Gatekeeper and registratio gateway [7:53420]
Date: Mon, 16 Sep 2002 17:14:45 GMT
Hello people,
I have a problem when I want support AAA
not register the
gateway to the gatekeeper.
I will appreciate pointers from anybody.
TIA
From: Idecnet Admin
To: Tunji Suleiman
Subject: Re: Problem Gatekeeper and registratio gateway [7:53420]
Date: Tue, 17 Sep 2002 12:22:59 +0100
O my god you are an angel that enlightened my away, just
Hi Tom,
This is not an answer to ur question per se, but I cant help but notice the
snip below in ur output log:
*Mar 1 00:00:19.771: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(11)T, RELEASE
Hi Jeff Duchin, pls what's IDF?
Regards
From: Jeff D
Reply-To: Jeff D
To: [EMAIL PROTECTED]
Subject: Re: network design question [7:52762]
Date: Fri, 6 Sep 2002 01:11:16 GMT
How many users per IDF?
Jeff
John Brandis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I can take the time out to look into ur design. I got Visio Technical.
Regards.
Tunji
From: John Brandis
Reply-To: John Brandis
To: [EMAIL PROTECTED]
Subject: Review of network design, any takers ? [7:52776]
Date: Fri, 6 Sep 2002 08:22:36 GMT
Hi,
Any one keen to look over a network that I
All,
I loaded TCL application and audio prompt files to flash to avert problems
with TFTP. Everything worked fine, no issues. I customized welcome prompt
to client's need to replace Cisco welcome prompt in flash. No issues. I
issued delete flash:en_welcome.au. Got prompt to confirm, entered
I forgot to add that upon trying to copy the modified en_welcome.au file, I
got the following:
GW-3660#copy tftp://217.197.175.4/promtps/en_welcome.au flash
Destination filename [en_welcome.au]?
Accessing tftp://mind/edgepromtps/en_welcome.au...
%Error opening
://www.cisco.com/warp/public/788/voip/gk-call-routing.html
Hope this helps,
Hamid
Tunji Suleiman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I set up two gateways with session target to each other and made calls
between them successfully. I introduced gatekeeper and the
I set up two gateways with session target to each other and made calls
between them successfully. I introduced gatekeeper and the gateways
registered successfully to the gatekeeper, but do not complete calls. I will
appreciate pointers from voice gurus. Below are my configs and sh gate end
What's the context? A search for the command on CCO returned so many
documents. Check out the link
http://www-search.cisco.com/pcgi-bin/search/public.pl?q=session-disconnect-warningsa=Gonum=10searchselector=0
From: Shane Stockman
Reply-To: Shane Stockman
To: [EMAIL PROTECTED]
Subject:
I cant think of why the route-cache command is nt working, probably because
u re at the subinterface level, I wont swear on that. Try it on the main
interface, ie fa0/1. The idea is to enable fast-switching packets back out
the interface on which they arrived.
Http packets going to the web
Directed broadcast forwarding is disabled by default, so you wont see no ip
directed broadcast in the config. If you enter ip directed broadcast command
however, it shows in ur config.
You can verify with sh ip int
Regards
From: YASSER ALY
Reply-To: YASSER ALY
To: [EMAIL PROTECTED]
Your router expects wccp version 2 on ur web-cache by default. Ur web-cache
is sending wccp version 1 messages, hence ur debug output. U have to do ip
wccp version 1 in global config mode on the router to enable support for
wccp version 1. If u dont get the version option on doing ip wccp ?,
My experience is with Cisco Cache Engines running version 1 and 2 wccp.
I have never implemented a cache on squid (that should be wccp running on a
unix box, right?), so I really cant help much there. But if ur router is
properly configured, below is the wccp config u should have:
ip wccp
Hi All,
I upgraded a 3660 VG IOS to resolve some call application and ivr tcl
scripts issue. The issue seems resolved, but the gateway now restarts
intermitently. Can somebody please provide an insight to possible cause, as
indicated by below output:
GW-3660#sh ver
GW-3660 uptime is 1
I experienced that b4. It means your flash image got corrupted somehow,
probably in the download process, if u used a download accelerator.
HTH
From: McHugh Randy
Reply-To: McHugh Randy
To: [EMAIL PROTECTED]
Subject: flash copy failed checksum error [7:51834]
Date: Wed, 21 Aug 2002 14:25:14
recommends 32MB - I took a chance with
24MB flash.
You re probably right about the bug, only I cant wait to find out. If
anybody is interested in pursuing it, I can mail the flash:crashinfo file
and full stack trace.
Regards.
From: Leiva, Angel E
Reply-To: Leiva, Angel E
To: 'Tunji Suleiman
Hi all,
I am reposting this because there were no responses to the first post. I am
trying to conserve IP addresses by using private IPs for dialin users. From
clients I can dial in to network but cant get beyond 3640 NAS, cant even
ping 3640 E0/0 LAN IP address. From 3640, I can ping Lo0
of the 3640, then
the issue should be resolved.
TIA
From: Nigel Taylor
Reply-To: Nigel Taylor
To: [EMAIL PROTECTED]
Subject: Re: Routing with IP Unnumbered Loopback [7:50581]
Date: Sat, 3 Aug 2002 10:17:44 GMT
Tunji,
See Inline...
- Original Message -
From: Tunji Suleiman
Hi all,
I am trying to conserve IP addresses by using private IPs for dialin users.
From clients I can dial in to network but cant get beyond 3640 NAS, cant
even ping e0/0. From 3640, I can ping connected client and any host on
Internet. From 2611 Internet gateway, I can ping 3640 e0/0 and
Hi Group,
I am setting up WAN link on serial interface using HDLC encap across VSAT
link. I uplink my TX carrier and have CD, ie lock on remote carrier, in
short good TX and RX across Satellite link. I set up static route to next
hop but no route appeared in my routing table. I noticed line
Hi Group,
Can anybody please tell me if the the new Remote Access 640-605 exam has
simulation questions like in the new CCNA?
Thanks
_
MSN Photos is the easiest way to share and print your photos:
The command is:
service password-encryption
Tunji
From: Morgan Hansen
Reply-To: Morgan Hansen
To: [EMAIL PROTECTED]
Subject: enable password (encryption???) Please help [7:47847]
Date: Mon, 1 Jul 2002 17:03:33 GMT
Hi all!
Hmm... Im quite new to this all and was wondering if some of you
Hi Sunil,
Is this strictly for the IEs? If you will consider a CCNP with ISP and VoIP
experience, then please indicate the pay in USD. I will love to work in
India.
Tunji
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: CCIE Wanted. [7:44940]
Date: Fri,
Which Radius server are you using? Is it listening for authentication
requests on port 1812 or 1645? Looks like a radius server problem to me.
Ensure it is indeed authenticating. Most radius servers have inbuilt
facilities to test functionality.
Tunji
From: Pierre-Alex J. Guanel
Reply-To:
Hi Richard,
The aaa-new model command, once enabled always asks you for a
username/password combination for any login type. Looking at your config I
expect you to get a username/password prompt and failed logins for both con
and vty unless if authenticated by tacacs and am surprised you are
34 matches
Mail list logo
