Sorry, it should be "start-script A 12345678" for the point 2 below. Thank you.
-Original Message-----
From: YY [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 22, 2001 9:53 PM
To: [EMAIL PROTECTED]
Subject: Modem DDR problem - Urgent, please help !
Scenerio:
Router AUX por
"CONNECT". But this time, it makes the call and succeed.
I'm really exhausted with the above problem. Can any expert give a hand ? Thank you
very much !!
Regards,
YY
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
can you reverse-telnet from console ?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
vikas patel
Sent: Wednesday, February 28, 2001 8:26 PM
To: [EMAIL PROTECTED]
Subject: Reverse telnet Problem
Hello Group,
I have cisco 2511 router connected with Zyxe
For leased line, our router is on DTE side. How to check the clock speed we buy from
the service provider ?
thanks.
Regards,
YY
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
on 2nd router:
ip route 10.0.0.0 255.0.0.0 192.168.1.1
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Navin Parwal
Sent: Wednesday, March 07, 2001 10:10 PM
To: [EMAIL PROTECTED]
Subject: Static route Configuration Error
Hi ,
My network design is
Hi,
How to delete a specific entry in access list ?
If no way, what's the more efficient alternative ?
Thanks in advance.
Regards,
YY
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
Thank you all very much.
Evan:
I think "show controller " only works for the DCE side.
Brad:
Yes, I'll try your suggestion of checking the CSU setting. But for back-to-back
connection in home lab, is there no way to check clock speed received on DTE side ?
Thank you
Hi,
As you all know, we use termial server to reverse telnet into all routers in the
lab exam.
This is very convenient. However, on the terminal server, if you just press return,
it will re-open the most recent session. This is so annoying. Any good idea to
tackle this ?
en told me that they had a
software bug problem for the transition period from phase II (before Dec 15, 2000) to
phase III (Dec 15, 2000 on wards).
4. then they called me one day and said it was then OK. And I could re-register and
thing went well after that.
Regards,
YY
-Original Message
4003 has 2 gigabit uplinks (with ISL) to both 6509. This provides
redundancy. To prevent looping, run spanning tree per vlan.
I have several clients using such a design. Hope this help.
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
frank
s the more practical
solution ? Thank you in advance.
Cheers,
YY
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
gateway". Thus Halabi doesn't
show such an example. Howard doesn't either.
The above are all my personal thinkings. You are all welcome to comment and correct
me if you disagree. Let's discuss and learn. Thank you.
Cheers,
YY
-Original Message-
From:
John,
Interesting. I think this is due to OSPF, not redistribution problem. Can you try
running RIP instead of OSPF ?
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Neiberger
Sent: Sunday, March 25, 2001 5:28 AM
To: [EMAIL
to define
"frame route" which is what you want on the fr switch, right ?
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Thomas
Sent: Friday, April 13, 2001 9:12 AM
To: [EMAIL PROTECTED]
Subject: Frame Relay switching [7:435]
Hi All - I am
Hi,
IPX Eigrp carries hop count number into IPX RIP during redistribution. If
an IPX Eigrp route has hop count > 15, then IPX RIP cannot get the route
because of the 16-hop limit. Is there solution ? Thanks in advance.
Y
May 23, 2001
Message Posted at:
http://www.groupstudy.com/form/read
Hi,
What's advantage or use of IP in IP GRE tunneling ? Thank you.
Regards,
YY
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16833&t=16833
--
FAQ, list archives, and subscription info: http://www.groups
Loopback is always advertised as 32bit host route no matter what mask you
assign to it.
To advertise it as a subnet route, use "ip ospf network point-to-point"
under int loop0
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Use policy routing:
int s0
ip policy route-map TEST
route-map TEST permit
match ip address 1
set ip next-hop (your host IP)
access-list 1 permit any
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Leonardo Toco
Sent: Wednesday, August
All of them, as long as the network is reachable.
Packets will be load-balanced for those 5 default routes.
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Vijendra Jaiswal
Sent: Wednesday, August 22, 2001 3:32 PM
To: [EMAIL PROTECTED
ic is quite new to me. Hope you experienced guys can help. Thank
you.
Regards,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
EA Louie
Sent: Thursday, August 23, 2001 7:12 AM
To: [EMAIL PROTECTED]
Subject: Re: IP in IP GRE tunneling [7:16833]
&g
int s0
backup bri0 or dialer0
alternatively you may use floating static route to set the route through
isdn higher distance than that of primary int.
cheers
yy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
bob Perez
Sent: Monday, August 27, 2001 10
etween the 2 routers should be fairly enough.
Cheers,
YY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Cisco Lover
Sent: Wednesday, August 29, 2001 6:28 PM
To: [EMAIL PROTECTED]
Subject: RE: IPSEC Q's [7:17646]
Dion,
Thanks a lot for detailed an
22 matches
Mail list logo
