broadband

hi all I am at present trying to start a study of heavy content distribution, Video and music clips using broadband technology. I am looking for resouces on equipment architectures for such a setup, so far I have not turned up much. I would be grateful for any links etc thanks tayta

boot# set ios-conf =142

boot# set ios-conf =142 it seems to be a differant procedure for the 800 series than for the 2500, 4hrs blown...but I guess I will know next time or.. "tayta" <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: 90duia$gkj$[EMAIL PROTECTED] > Dear all > in a fran

boot#

Dear all in a frantic attempt to recover control of a cisco 800 router I have reached the point of boot# could anybody advise me of where to go from here. The saved config. is of no interest to me as I want to configure it for my own purposes now. any help appreciated thanks tayta boot# help

passive FTP

I have seen an issue discussed here before regarding passive ftp getting mucked up by routing equipment? I am experiancing this problem at the moment, when using std. windows FTP clients (default Passive ftp) i get very bad performance issues connecting to a Unix FTP server ( no config changes

Re: corp. restrictions workaround?

I did not express this so clearly tayta "Dennis Laganiere" <[EMAIL PROTECTED]> wrote in message C96EA0C60B1DD311809300902778728201164296@fs5_mail">news:C96EA0C60B1DD311809300902778728201164296@fs5_mail... > My advise is run, run like the wind. > > -----Origina

Re: corp. restrictions workaround?

3 to 4 weeks. > > > TCyberG > > > > > -Original Message- > From: tayta [SMTP:[EMAIL PROTECTED]] > Sent: 22 November 2000 10:55 > To: [EMAIL PROTECTED] > Subject: corp. restrictions workaround? > > Scenario is a Corporate headquarters building, 3000 employees, 2000 in

corp. restrictions workaround?

Scenario is a Corporate headquarters building, 3000 employees, 2000 in main org, and 5 * 200 in sub orgs, Corporate IT policy as regards Internet access is very tight eg site restrictions, most protocols blocked, and extremly slow. All five suborgs want to get around these restrictions but still

sml office net

x27;cisco equip' route for this will be much appreciated tayta _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

cabling stds

10 Questions of Cabling Standards might be of interest to some http://www.anixter.ch/home2.html?http://www.anixter.ch/SBJAAD/090500-3399-01 .html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nond

passed CCNA

ame tagging, -Cryptic OSI questions, only way here is learn OSI inside out. -Signalling System 7 , ? -Backoff -pick out valid mac address from line-up keep a cool head Wish you the best Tayta **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/l

wan LAN confusion!

sorry normaly I ask only router stuff here but I'm desperate have MS messed up TCP or did I miss something does anybody know how I can get traffic destined for my LAN to go over my WAN gateway when I am out o the office, notebook win98 (shame on me) all traffic destined for what is normaly my L

f5

Am curious to know if anybody has an opinion on the F5 Big Ip loadbalancer as compared to simalar Cisco offerings, just interested Murt ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://ww

some networking utilities

stumbled accross this resource page, might be of interest to someone http://www.heavysecurity.com/utilities/networking.shtml particularly this! Wannabe Version Number: Unknown Byte Size:3 MB (3,001,064 bytes) License: Freeware Platform: Windows 95/98/2000 Description:An excellent IOS simulator

Re: Weird response

can MTU sizes be set differant for your Ping and Tracert utilities? Jose Luis Canillas <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: 05E4D396A23E801E*/c=US/admd=400net/prmd=abnamro/o=notes/s=Canillas/g=Jose-Lu [EMAIL PROTECTED] > Hi all, > > Can someone tell me why is it that I can traceroute to

Re: CISCO Simulation

r1r2.com is a regular tip here, Kiarash Bodouhi <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: [EMAIL PROTECTED] > > Hi, > > You can use Zebra at www.zebra.org. Actually it is not just a simulation > software. It is a high quality routing daemon which runs under Unix > variants and support RIP

no prompt

just got a new 1400 delivered, i cant get a prompt up , with a console session, anybody care to speculate thanks a mil tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http

Re: ccnp 2.0

to fit perfectly. Folks would do well to remember that amongst > everything else. > > My $0.02 > > Nigel.. > > - Original Message - > From: Chuck Larrieu <[EMAIL PROTECTED]> > To: tayta <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Sunday, Jul

Re: file can't be deleted on 3640

sqeeze command possibly? ie. sqeeze filesystem: , purpose is to permanently delete deleted files, Jim Bond <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: [EMAIL PROTECTED] > Hello, > > I copied IOS file to flash memory but got checksum > error. I wanted to delete the file but failed. I used > t

ccnp 2.0

anybody know of already published materials for working towards ccnp 2.0, thanks ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure vio

NAT and BGP

Our IOS running on a 7200 does not support NAT! We are at present running BGP, we need to start running NAT, The question is can you run both BGP and NAT on the same (7200) router ? thanks Tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list

Re: Routing 2.0 Material

I ' m in the same predicament but without any study material, can any body recommend any material for working toward ccnp 2.0 thanks tayta "Stephen Collins" <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: 001601bfdd54$3781ad60$[EMAIL PROTECTED] > > Lacking the avail

Re: trace pop3?

our Gateway router , we are also experiancing Lag and broken connections with FTP (only with clients??, not from cmd line) Weirdness!! Is somone messing with our Vlan?? Tayta "JULIUS OMIDIORA" <[EMAIL PROTECTED]> schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PR

trace pop3?

ul for any trouble shooting tips, to determine where the 110 pkts are being dropped thanks in advance tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misc

bandwidth estimation!

? thanks Tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: NAT for ISPs

I am a newbie I would hazard a guess that, for an ISP(assuming thousands of users) to do address translation would be a large technical feat, consuming more Hardware and other resources than the savings on registered IP addresses could justify Please correct me if I am wrong Tayta <[EM

password dencryption

As part of the boson utilities you can deencrypt cisco passwords, anybody care to speculate on what security implications this has.. tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http

newbie purchase

Cisco 4500 Router - IOS 10.3, 12mb memory, 8mb flash. $ 1,100.00 Cisco NP-2E - 2 x 10BaseT ethernet module. . $ 395.00 Cisco NP-2T - 2 x Serial port module. . $ 375.00 does this fit together, and what is lacking thanks ___ UPDATED Posting Guidelines: http:/

Re: r1r2.com down

I stand corrected, its back, by the way it's a great service. Murt tayta wrote: > r1r2.com s free lab seems to be having probs today, does any body know of > another freelab online > > thanks > > tayta > > > ___ &g

r1r2.com down

r1r2.com s free lab seems to be having probs today, does any body know of another freelab online thanks tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report

Re: Why does anybody make the CCNA

For the same reason that people makes beginners English? Hans-Walter Katzengruber wrote: > Hello > > i am wondering why everybody makes the CCNA Certification and not the CCIE ? > I am happy if someone can help me about that reason. > > Greeting > Hans-Walter > > > _

cisco 4500?

please excuse my ignorance, but Is a cisco 4500 a suitable router for a certification Lab, and are the modules expensive? I can get one at a bargain price but without modules most discussion here seems to be about 2500s thanks tayta ___ UPDATED Posting

Re: buying routers

thanks for that people, by the way total for 2 routers is now 1200$ , so good deal , but still unsure, then big ? is if (eth or TR ) are transparent to cisco, more info very welcome tayta "Ray Mosely" <[EMAIL PROTECTED]> schrieb in im Newsbeitrag: 000901bfc0e4$d8af3220$

buying routers

cannot seem to see 2501s or 3s anywhere approaching this reasonable price, I am now study for ccna, but will be going on to the more advanced certs. thanks Tayta ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and

2*2504

As a CCNA candidate with ambition to do further exams would 2*2504s be a good place to start building a lab or would it be silly to start just with tokenRing, (I have been offered 2*2504 for $1500, is this a good price) other 2500s seem to be more expensive? please murt

Re: very off subject...

Enable IP fwd with # echo 1 > /proc/sys/net/ipv4/ip_forward ""Brandon Peyton"" <[EMAIL PROTECTED]> schrieb im Newsbeitrag [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi guys, > > I know this is off subject but im at dire straights with this machine. > but i've looked in heaps of HOW-TO's an

after ccna?

What is the logical exam to take after ccna? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: any cisco 2501's for sale???

I have been keeping an eye on Ebay, reasonbly priced used 2501s seem to be available every day, maybe some users have bought this way and advise us on their experiance [EMAIL PROTECTED] wrote: > Can someone point me in the direction of used cisco gear? Any 2501's for > sale? > Please reply t

Re: free router access

try www.r1r2.com lisong wrote: > Hi, gurus, > anybody can tell me the site which can provide free router access, > i believe I 've saw some but forget their URL. thanks !!! > > > Li Song > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/g

Re: Links and Information to Virtual Labs...

R1R2.com is one many people use, the web site also has a list of links to other labs tayta Jon Mendoza wrote: > Hello All, > > I'm looking to compile and collect a lists of links of Virtual labs such as > Virtual Rack and CCIEbootcamp. > > Primarily interested in vir

myhre book

if anybody is using the ccna certification man. from R N. Myhre, I would appreciate there there opinion on the 'book answers' given to following Ch. 6 Practice Questions Nos 6 and 8 thanks Murt ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guid

Re: REQ: CCNA EXAM

if you look back through the previous postingsw some people have post links to informative web sites tayta Glenn wrote: > Hi there, > Could anybody help me out as to what I should concentrate on for the CCNA > 1.0 Exam. > Also how much in depth do I need to know the IOS commands.