I have two routers connected back to back via two serial cables. I can ping
each one from the other one. The problem is that they do not show up when I
do a show cdp neighbor. I am sure that I am just overlooking something
small.
Thanks
_
FAQ, list archives, an
-
From: Roberts, Timothy [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 8:48 AM
To: '[EMAIL PROTECTED]'
Subject: Cant see CDP neighbor
I have two routers connected back to back via two serial cables. I can ping
each one from the other one. The problem is that they do not show
check to make suire that cdp is enabled on both routers
Regards,
Jason Baker
Network Engineer
MCSE, CCNA
-Original Message-
From: Roberts, Timothy [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 10:48 AM
To: '[EMAIL PROTECTED]'
Subject: Cant see CDP neighbor
I Should have included in my last email that I already performed the cdp
enable command.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 11, 2001 4:05 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: Cant see CDP neighbor
Robert
.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Roberts, Timothy
Sent: Thursday, January 11, 2001 4:19 PM
To: '[EMAIL PROTECTED]'; Roberts, Timothy
Cc: [EMAIL PROTECTED]
Subject: RE: Cant see CDP neighbor
I Should have incl
; -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, January 11, 2001 4:05 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: RE: Cant see CDP neighbor
>
>
> Robert make sure that you enable cdp on the interface. T
eresting.
>
> IOS 12.1 something.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of
> Roberts, Timothy
> Sent: Thursday, January 11, 2001 4:19 PM
> To: '[EMAIL PROTECTED]'; Roberts,
> Timothy
> Cc: [EMA
> ping ability from end to
> > end. But no CDP.
> >
> > Interesting.
> >
> > IOS 12.1 something.
> >
> > -Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of
> > Roberts, Timothy
>
PROTECTED]
Subject:RE: Cant see CDP neighbor
If the cdp config is in place and it does not work
then
I bet it's a bug . It's been broken before .
flem
--- Chris McCoy <[EMAIL PROTECTED]> wrote:
>
> Chuck,
>
> I've seen this when doing frame relay multipoin
to:[EMAIL PROTECTED]] On Behalf Of Flem
> Sent: Thursday, January 11, 2001 7:25 PM
> To: Chris McCoy; Chuck Larrieu; Roberts, Timothy; [EMAIL PROTECTED]
> Subject: RE: Cant see CDP neighbor
>
> If the cdp config is in place and it does not work
> then
> I bet it's
01 4:19 PM
> To: '[EMAIL PROTECTED]'; Roberts, Timothy
> Cc: [EMAIL PROTECTED]
> Subject:RE: Cant see CDP neighbor
>
> I Should have included in my last email that I already performed the cdp
> enable command.
>
> -Original Message-
> From: [E
I had one problem once with a PPP Multilink Interface, three T1's between
two buildings... everything fine, but, I could not see anything on CDP.
The Solution was very easy, a "clear interface" ( on the virtual one) solved
it.
Good luck.
Gonzalo, CCNP
""Roberts, Timothy"" <[EMAIL PROTECTED]>
>
> > I Should have included in my last email that I already performed the
cdp
> > enable command.
> >
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, January 11, 2001 4:05 PM
>
13 matches
Mail list logo