flow control set to none?
Bri
"" wrote in message
news:[EMAIL PROTECTED]
> Hmmm,
>
> The settings look fine (though sometime 1 stop bit can be tried as well).
> Also verify flow control is set to none.
>
> The cisco rollover cable is 1-8 = 8-1 pinouts. I'm guessing you are
> using the c
Hmmm,
The settings look fine (though sometime 1 stop bit can be tried as well).
Also verify flow control is set to none.
The cisco rollover cable is 1-8 = 8-1 pinouts. I'm guessing you are
using the cisco adapters and cable?
www.ccie4u.com
On 22 Feb 2003 at 12:49, puro prasad wrote:
> Hi,
Hi,
Unable to login to 7200vxr series router through console. Port settings on
the terminal: 9600 baud, 8 data bits, no parity, 2 stop bits. Tried using
other settings too, didn't help. Help!!
Regs.,
Prasad
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63555&t=63555
---
I am looking at a catalyst 1600 on ebay and would like tobuy it. But I'm
told that the command line is different than the one that the cisco3920
uses. The 3920 is used for the ccie.
Does anyone know if this is true are not.
"" Geekpower"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]
Please help me out here. I picked up a Cisco ws-c1600 token ring switch to
add to my lab but I can not get into the cosole port. I am getting
+++ATS0=3 E0 &C1 L0 &D2 in 9600 8n1 with a light blue Cisco rj45 roll over
cable, a 9pin terminal adaptor and a 25 pin terminal adaptor. I have also
tried
I'm not sure what you meanare you sayign you are telnetting into this
beast? and then want to manipulate a port setting? Why would you want to
change to port 16? What is the goal here?
If you have local access and you want to configure this guy serially, then
you can hook into any non modi
Do I have to set port to local access and then use the change server console
port 16 in order to gain console to the DEC server?
Gavin Wilson
Kleinwort Benson Private Bank
Tel: 0207 4751771
Mobile: 07989441850
email: [EMAIL PROTECTED]
--
Why replace RAM and not Flash or Both ?
Sunil
""Thom Castognalia"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Sunil - Open up the PIX. Remove the flash card and the RAM. Re-install
the
> flash card and the RAM. See if that does the trick. If not, replace the
RAM.
>
> TC
Sunil - Open up the PIX. Remove the flash card and the RAM. Re-install the
flash card and the RAM. See if that does the trick. If not, replace the RAM.
TC
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36140&t=36138
--
FAQ, l
Hi All,
I recently upgraded Flash and RAM on a Cisco PIX 520 and it worked fine for
a week.After a week or so in production it suddenly stopped , rebooted but
no luck, I could not even console into it.What happend is after some time I
had the console access again and everything is fine, no
> hello everone,
>
> After an upgrade of Ios and Dram (kingston) on a 1603 R router by one of
our guys,
> the
> router crash and i cannot getinto the router the console is not
> responding
> the back led is showing ok the link led is ok BUT the front led is
> blingking
> countinously , sometimes
sco routers will be able to
do a "password recover" and change everything you do!
Hope this helps!
Regards
Ednilson Rosa
- Original Message -
From: "Omer Ehsan Dar"
To:
Sent: Sunday, August 26, 2001 4:18 AM
Subject: console access to 2500 [7:17302]
Hi all,
Can y
Hi all,
Can you restrict console access to the router? Does it accept an
encrypted password. Also can you prevent in some way people from using
the copy run start command so that they cannot update the router config.
Thanks
Omer
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
John Kale wrote:
>
> Hi all,
>
> i have been trying to access a 2900xl switch thru the console port but this
> has proven to be very fustrating. the only thing i have done is that i have
> used all possible connection speed (all other setting remain the
> same)connection is still nil (nothin
7;m curious if anybody knows of any inexpensive alternatives to the
> 2509/2511 routers to reverse telnet into console ports?
>
> I've seen some products online but they don't specifically state they will
> work for Cisco console access, and none of the sales reps are able to giv
Hi All,
I'm curious if anybody knows of any inexpensive alternatives to the
2509/2511 routers to reverse telnet into console ports?
I've seen some products online but they don't specifically state they will
work for Cisco console access, and none of the sales reps are able to g
discusses with examples is at cisco.com +
> univercd/cc/td/doc/product/software/ios120/12supdoc/dsqcg3/qcsecur.htm
>
> good luck
>
> andras
> -Original Message-
> From: Marakalas [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 22, 2001 1:31 AM
> To: [EMAIL PROTEC
Hi all
I have tacacs loaded on all our routers in our network and would like
to configure the console ports to use it also, not only the vty lines.
I noticed that on IOS ver 10.x, you could actually configure 'login
tacacs' on the console port, but can't do it on the new version of the
IOS. Any a
access-class in 5 then create access-list 5 permint x.x.x.x
Hope that helps.
- Original Message -
From: "Omer Ehsan Dar" <[EMAIL PROTECTED]>
To: "Cisco GroupStudy" <[EMAIL PROTECTED]>
Sent: Friday, March 30, 2001 3:37 AM
Subject: Console access
>
Hi all,
Can we stop access to the console port from VTY session or telnet.
Thanks
Omer
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
20 matches
Mail list logo
