Okay gang, here's a challenge that I'm trying to overcome (warning: it may
not be solvable)
I just got a 2514 where I couldn't get any response from the console port.
Of course, I tried changing baud rates, etc, but when I finally connected to
the AUX port, I was able to get in. The enable pass
console port [7:9621]
> Okay gang, here's a challenge that I'm trying to overcome (warning: it
may
> not be solvable)
>
> I just got a 2514 where I couldn't get any response from the console port.
> Of course, I tried changing baud rates, etc, but when I finally conn
up for autoinstall.
> See link:
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/1cb
> ook/1cclkstr.htm
>
> Tony M.
> #6172
>
>
> - Original Message -
> From: EA Louie
> To:
> Sent: Saturday, June 23, 2001 2:11 AM
> Sub
Just a thought - if you have access to another router with same capabilities
- install that routers operational flash - i.e. swapping flash and
preprogramming it.
Just a thought - might work?
Okay gang, here's a challenge that I'm trying to overcome (warning: it may
not be solvable)
I just
doesn't work because configuration is stored in NVRAM, not flash :-(
try again (Tony was on the right track)
-e-
- Original Message -
From:
To:
Sent: Saturday, June 23, 2001 12:31 PM
Subject: Re: Dead console port [7:9621]
> Just a thought - if you have access to anothe
40 AM
Subject: Re: Dead console port [7:9621]
> I was looking for Louie's link, and it didn't come up. Considering the
fact
> that 99% of problems are physical, plus the fact that you just bought this
> piece of hardware, I would look at replacement as an issue. I know that
>
all is NOT lost. This is the kind of stuff that I really feel IS CCIE level
stuff, and makes me feel pretty darned good to have recovered a router.
Thanks for the pointer, Tony!!!
-e-
- Original Message -
From: Tony Medeiros
To: EA Louie ;
Sent: Saturday, June 23, 2001 8:03 AM
Subject:
Comments within and below.
> Subject: Dead console port [7:9621]
>
>
> > Okay gang, here's a challenge that I'm trying to overcome
(warning:
> it
> may
> > not be solvable)
> >
> > I just got a 2514 where I couldn't get any response fr
LOL okay Paul... maybe you saw my earlier successful post, but if
not...see below, and thanks for your detailed reponse!!!
-e-
- Original Message -
From: Paul Werner
To:
Sent: Sunday, June 24, 2001 12:00 AM
Subject: Re: Subject: Re: Dead console port [7:9621]
> Comments wit
Comments within.
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
On Mon, 25 Jun 2001, EA Louie ([EMAIL PROTECTED]) wrote:
> LOL okay Paul... maybe you saw my earlier successful
post,
I m
10 matches
Mail list logo
