I've never had to deal with DS3 connections before and I'm a little bit
lost. All of my local Cisco contacts are out of the office today so I
thought I'd ask this here.
I need to connect a 7513 to a 3662 via point-to-point DS3 and I'm not
sure what hardware I need. It appears that my only option
I didn't realize it yesterday but a peer of mine has a 3660 HSSI
connected to a 6 port DS3 module in a 7304 which would be the same
config wise as a PA-T3. There is one command to be aware of, the "csu
mode" interface command that you would use on the PA-T3:
c7304(config-if)#dsu mode ?
cisco
AM
To: [EMAIL PROTECTED]
Subject: Re: Hardware for DS3 Connections [7:56094]
I didn't realize it yesterday but a peer of mine has a 3660 HSSI
connected to a 6 port DS3 module in a 7304 which would be the same
config wise as a PA-T3. There is one command to be aware of, the "csu
mode&
The adapters don't need to match in both routers. You can use HSSI in the
3600 and T3 PA in the 7513. Are you provisioning the DS3s as ATM circuits?
If so, look at the ATM modules for 3600 series. I have had no problems using
the single port ATM NM on the 3640 chassis.
Email me if you have othe
I forgot to mention that these will be frame circuits, not ATM or
point-to-point.
Thanks to you and to Dave Madland for clearing this up. Considering this
hardware costs several times more than that required for T1 speeds and
below, I don't want to screw up and find out about it later!
John
""t
5 matches
Mail list logo