That's great info you provided Madman! Again, thanks much for your info!!!
Thomas N.
MADMAN wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Your correct, in fact MLS is enabled by default on the 6500. Main
feature of a 5000, I don't think. I have seen people enable MLS on
Hi All,
I wonder if CAT 4006 switch support MLS? It doesn't seem to have a layer 3
card. I wonder if I can enable MLS using an external router, or pointing it
to the MSFCs of a CAT 6500 that have MLS enabled? Thanks!
Thomas N.
Message Posted at:
You can do it with an external router if you have an 10/100 blade that
supports isl or dot1q trunking. or you gan get an rsm I believe or an nffc.
G30RG3
Thomas wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I wonder if CAT 4006 switch support MLS? It doesn't seem
Sure if you use an external MLS-RP, 75xx, 72xx, 4500, 4700. I'm
reasonably sure it's a hardware issue with the WS-X4232-L3.
Dave
Thomas wrote:
Hi All,
I wonder if CAT 4006 switch support MLS? It doesn't seem to have a layer 3
card. I wonder if I can enable MLS using an external
Layer 3 card for the Cat4003 and Cat4006 is the WS-X4232-L3. List is
$14,995. Description below.
Catalyst 4000 E/FE/GE L3 Module, 2-GE(GBIC),32-10/100
Tim
- Original Message -
From: Thomas
To:
Sent: Thursday, October 25, 2001 2:45 PM
Subject: Mulilayer Switch (MLS) on CAT 4006 [7
Okie,
Here is my CAT 4006 specs and topology. My 4006 has a Supervisor Engine II
(WS-X4013). It has an uplink TRUNK to a CAT 6509 that has MSFC doing
routing between VLANS and has MLS enabled.
My question is if I have MLS configured on MSFC of the 6509, the enabling of
MLS on CATOS of 4006
Message -
From: Thomas
To:
Sent: Thursday, October 25, 2001 2:45 PM
Subject: Mulilayer Switch (MLS) on CAT 4006 [7:24142]
Hi All,
I wonder if CAT 4006 switch support MLS? It doesn't seem to have a layer 3
card. I wonder if I can enable MLS using an external router, or pointing
Can't say I've tried that. First question, why is MLS sooo important
that you feel you must do this?? There are legitimate reasons for MLS
but I see to many people turn knob only because they are there:(
That aside I don't think you can. On the external devices on which
you can do this your
Well, please correct me if I am wrong. As my understanding, MLS is the main
feature of Layer 3 switch (5000, 6000, 6500... not sure 4000 products). MLS
allows hosts on different subnets talking at the wire speed after initially
routed by the route processor. After that, MAC of these hosts and
On the last sencentence, I meant packets to/from host on different VLAN /
subnet...
Sorry,
Thomas N. wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Well, please correct me if I am wrong. As my understanding, MLS is the
main
feature of Layer 3 switch (5000, 6000, 6500... not
Your correct, in fact MLS is enabled by default on the 6500. Main
feature of a 5000, I don't think. I have seen people enable MLS on
networks that were not even breaking a sweat, why? because they could
and I'm simply saying that is not a good reason as I have fought to many
MLS bugs to simply
11 matches
Mail list logo