I have the following error whilst playing with OSPF
12:52:40: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
backbone area must be virtual-link but not found from 10.1.4.20, Ethernet0
I have 2 routers, Router A and Router B, back to back. Able to get the 2
connected, however whe
Lemme take a stab at this one. I don't run OSPF where I work, but I'd
like to keep my chops up to date =)
In OSPF, you need to have an Area 0. If there are 2 routers only in your
network, and only one area, it needs to be Area 0. If there is only 1 Area
in your network, there is no need fo
Its seeing the router as no direct link to the backbone (area 0) and such is
assuming you have a virtual link configured. Change your areas to 0 and see
what happens.
Area 0, fundamental to OSPF.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48468&t=48463
friend ;)
Charles
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael Williams
Sent: Tuesday, July 09, 2002 9:37 PM
To: [EMAIL PROTECTED]
Subject: RE: OSPF problem [7:48463]
Lemme take a stab at this one. I don't run OSPF where I work, bu
rwarded by Jenny Mcleod/NSO/CSDA on 10/07/2002 03:51 pm -
"Michael Williams"
Sent by: [EMAIL PROTECTED]
10/07/2002 02:36 pm
Please respond to "Michael Williams"
To: [EMAIL PROTECTED]
cc:
Subject:RE: OSPF problem [7:48463]
Is this par
For a start it appears you do not have a common subnet on the link between
the two devices so it'll complain about that.
Make the Router A interface 10.1.1.1/255.255.255.252 and Router B
10.1.1.2/255.255.255.252 then add
router ospf 1
network 10.1.1.0 0.0.0.3 area 0
Every OSPF network must hav
A quick note below.
At 04:36 AM 7/10/2002 +, Michael Williams wrote:
>Lemme take a stab at this one. I don't run OSPF where I work, but I'd
>like to keep my chops up to date =)
>
>In OSPF, you need to have an Area 0. If there are 2 routers only in your
>network, and only one area, it ne
Comment below,
At 04:18 AM 7/10/2002 +, John Brandis wrote:
>I have the following error whilst playing with OSPF
>
>12:52:40: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
>backbone area must be virtual-link but not found from 10.1.4.20, Ethernet0
>
>I have 2 routers, Router
At 5:50 AM + 7/10/02, Charles D Hammonds wrote:
>It is always best practice to use area 0 if it is the only area. If you have
>more than one area configured either one of them *must* be area 0 or there
>must be a virtual link to area 0. See the following for your particular
>error:
>
>http://w
I think it is ur misconfiguration on the interfaces.
In fact, OSPF will not need a 'backbond' is there is only one area.
On Wed, 10 Jul 2002 04:18:45 GMT
"John Brandis" wrote:
> I have the following error whilst playing with OSPF
>
> 12:52:40: %OSPF-4-ERRRCV: Received invalid packet: mismat
Try area 0. I think it will work.
thinkworker wrote: I think it is ur misconfiguration on the interfaces.
In fact, OSPF will not need a 'backbond' is there is only one area.
On Wed, 10 Jul 2002 04:18:45 GMT
"John Brandis" wrote:
> I have the following error whilst playing with OSPF
>
> 12
-Original Message-
> > From: thinkworker [SMTP:[EMAIL PROTECTED]]
> > Sent: Friday, July 12, 2002 6:56 AM
> > To: [EMAIL PROTECTED]
> > Subject:Re: OSPF problem [7:48463]
> >
> > I think it is ur misconfiguration on the interfaces.
>
12 matches
Mail list logo