tter route. This DISTANCE EIGRP allows you to
have your AD set differently for Internal and External Routes
-Original Message-
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 27, 2001 3:14 AM
To: [EMAIL PROTECTED]
Subject: Re: Administrative Distance [7:9921]
I'll proba
External Routes
-Original Message-
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 27, 2001 3:14 AM
To: [EMAIL PROTECTED]
Subject: Re: Administrative Distance [7:9921]
I'll probably throw it on the lab and see what happens... Thanks much to
All
""
s yes, it should behave exactly like that
>
> but I would want to run it in the lab first.......
>
> Kevin Wigle
>
> - Original Message -
> From: "Thomas"
> To:
> Sent: Tuesday, June 26, 2001 1:09 AM
> Subject: Re: Administrative Distance
Thomas,
Surejust use the distance parameter at the end of the ip route command:
ip route (network prefix)(mask)(next hop router) 1-255.
"1" being the highest possible distance and "255" causing the router to not
ever use this route.
This is called a floating static route.
HTH,
Rob H
Messag
Is there a better way to do this?
>
> Regards,
> John
>
> >>> "Kevin Wigle" 6/26/01 10:32:10 AM >>>
> My gut feeling is yes, it should behave exactly like that
>
> but I would want to run it in the lab first...
>
> Kevi
heers,
-Michael Cohen CCIE #6080
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: Tuesday, June 26, 2001 11:32 AM
To: [EMAIL PROTECTED]
Subject: Re: Administrative Distance [7:9921]
My gut feeling is yes, it should behave exactly like
ike that
but I would want to run it in the lab first...
Kevin Wigle
- Original Message -
From: "Thomas"
To:
Sent: Tuesday, June 26, 2001 1:09 AM
Subject: Re: Administrative Distance [7:9921]
> Thank you very much Kevin!!! Let's say I assign
My gut feeling is yes, it should behave exactly like that
but I would want to run it in the lab first...
Kevin Wigle
- Original Message -
From: "Thomas"
To:
Sent: Tuesday, June 26, 2001 1:09 AM
Subject: Re: Administrative Distance [7:9921]
> T
Thank you very much Kevin!!! Let's say I assign a administrative distance
of 180 to a static route (backup route). It should not show up and be used
in "show ip route", given that the default route is active. If I
redistribute this static route (assigned with admin distance of 180) to the
EIGRP
yes, entirely possible, in fact, practiced quite often. those kinds of
static routes are called 'floating statics'
the syntax of the static route statement is
ip route i.i.i.i s.s.s.s n.n.n.n ad
where
i.i.i.i is the IP network you wish to connect to
s.s.s.s is the subnet mask of that network
n.n
ip route a.b.c.d w.x.y.z dentination.address distance ( higher than the
distance of the routing protocol in question )
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdindep.htm#xtocid279708
definitely watch the word wrap
make sense?
Chuck
-Original
Yes,
This is normally called a "floating static"
Configure the static with a higher admin distance. While the default route
is valid, the static will not show up in "sh ip route".
Once the default fails, the floating static route will be installed into the
routing table and it will be visible
12 matches
Mail list logo