Just has a rig come down yesterday on a Laser 28.
It was blowing like snot, tho. The attachment below gave way, and came up
through the deck ripping an 8" hole there. They were actually able to get
the mast back on the boat and make it back to Port Dover, amazingly.
Bill Coleman
C&C 39
I do not but, there is a maybe salvage yard in Quincy ma. That might have
something... they are called mass marine parts. They have quite a few mats
and one may suffice. They have a list of masts and the boats they came off
listed on their website and I bet they have lots that aren't listed.
I don't think I have any sole supports that are as short as 2 foot long nor are
they black--mine are silver color...
Bob Boyer
S/V Rainy Days / Annapolis MD
1983 C&C Landfall 38 - Hull #230
email: dainyr...@icloud.com
blog: dainyrays.blogspot.com
"There is nothing--absolutely nothing--half so m
Hi,
While we are chatting about annual mast pulling our club Is looking at a
replacement for our mast crane.
We are looking for a design example/picture that is about 15' higher then most.
We haul out boats out on a marine railing with our cradle on it. The masts are
pulled on dry land whi
Hi Mark
The BBYC crane is the best in the area for pulling a mast, makes it
painless for mine. Were I you I would think about pulling it to allow a
proper inspection and maintenance - checking the rigging, the sheaves,
and the wiring. All can be done from the chair, but not as well.
I've le
On the first point - jack stand vs cradle --- I just had a new
cradle built by a local fabricator -- 6 pad cradle and looks
really strong. Should support the boat well.
As for the mast up or down Seems there is no real consensus.
My boat
What do you guys do when cruising? I often hand over the helm when we are
heading across the Bay and then tell her where we want to go (follow the line
on the screen.) and then take a nap or do something down below. Just ask
her to alert you if there is something she doesn't understand. If y
I agree with Dennis, I sent my wife through the Womanship Sailing program
in 1982. She spent a week in the USVI with 7 other women. Returned with a
boat load of enthusiasm and has not lost her love for sailing. She on to
successfully campaign her J-24 all over the Southeastern USA as well as
sailed
Danny
Do you know of an available Viking 33 mast?
Mike
-Original Message-
From: CnC-List on behalf of Danny Haughey via CnC-List
Sent: Mon 22/09/2014 4:48 PM
To: rjcasci...@comcast.net; cnc-list@cnc-list.com
Subject: Re: Stus-List Mast removal for winter?
The yard where I keep my boa
Don't just send your lady to sailing lessons. Send her to a week long
ladies only sailing class. It's a LOT different than taking lessons with a
coed group. She will not just get sailing lessons, she will get emotional
support, counselling, share experiences with other women, etc. Chances are
i
I heard of a boat named "Ruthless". The guy's wife's name was Ruth.
Then there was the famous race boat, "FUJIMO". IIRC it stands for "F*#$k you
Judy I'm moving on."
Martin
Calypso
1971 C&C 43
Seattle
[Description: cid:D1BF9853-22F7-47FB-86F2-4115CE0BAF2F]
From: CnC-List [mailto:cnc-list-bou
Francois:
The only other suggestion is to make something on the boat “hers”, something
she will ultimately know better than you. In my wife’s case, its handling
under power. It could be anything. Another thing you can try is having a
“goal”, something that can only be accomplished by the two
The major consideration that I have in winter mast removal is that a keel
stepped mast leaks water into the bilge and in Ontario cold winters leads to
ice where I do not want it. My mast comes down and the boat is shrink wrapped.
Yes , I could install a garboard drain I suppose but the bilge co
I'll let you guys know how the lessons help..
Racing did not help, she clammed-up even worse for fear that she'd screw
something up. Even if on that particular race, everything that could be
screwed-up was already taken care of so no one really cared. No amount of
screwing-up was going to make
Hi,
The teak and holly sole on my LF38 rests on several ~4' long black painted
square tubes. I have two short (~2' long) but otherwise identical to the other
sole supports which were given to me in a box with other components. I have
tried to locate where these short supports go, but I cann
an extra consideration is that if you are hauling by a crane, the procedure
is much more labour and time intensive. We tried it with a couple of boats
at the Club and everyone (probably other than the owners) hate it. If they
are charged by the hour, it would be more agreeable. But if they are c
I saw the two boats at the Newport Boat Show. One of the reasons I have bought
2 C&C’s is because I can easily single hand them due to the setup of the wheel
and the primary winches. Many boats I would never consider because it would be
impossible or impractical to sail shorthanded. Neither o
Ours used to do so as well - "insurance" now, we can leave them up. Mine
comes down every two or three years, just because I either have to fix
something up there or under the mast step. Last year, I got the mast out and
stored the boat under the shed - no cover, no nothing. neat! The ye
The yard where I keep my boat requires the mast to come down for winter storage
on the hard. I feel it gives me the opportunity to have a look at everything
every year. It also makes covering her up a lot easier... DannyLolita1973
Viking 33Westport Point, MA
-- Original Message --
Mike:
I agree that we haven't talked about this one for some time..in my case
(mast up)...the cost to take it down and put it back up is
prohibitivemore than $500 which is not part of the storage
agreementnot doing that every year.
Ron C.
_
From: CnC-List [mailto:cn
Mine goes down every 4 years for inspection of rod rig, tangs etc...This
winter, besides inspecting the rig, I have to get to the keel bolt below the
mast step and also deal with failed wind instrument. My datamarine
connector at the masthead is worn. I also plan on changing to LED tricolor
and a
This is a long time debate. Which damages boat / mast more? Removal and
reinstall of mast and potential mishaps or leaving it up? I know that one
season on our J27 we left the mast up. That Spring while working on the boat
the entire cradle would vibrate every time a gust of wind hit. I att
Seems to me you guys confer the title "Admiral" far too easily.just try to
make it a fun activity, racing can be fun for some but in my experience not
for all.warmth is important so get good gear. concentrate on reaching legs,
close reaches, beam reaches and broad reaches are easy, fast and fun.cho
Same in Annapolis. Masts stay in the boat unless they are being worked on.
Joel
On Mon, Sep 22, 2014 at 3:13 PM, Ron Casciato via CnC-List <
cnc-list@cnc-list.com> wrote:
> In the boatyards around Boston.almost no masts are removed for
> winter storage..most are stored with m
In the boatyards around Boston.almost no masts are removed for
winter storage..most are stored with mast up and seem to do
well
In the past 14 years, I've only taken mine down for revisions or repairs to
wind instruments..probably 3 times in that 14 year interval...
Ha! My wife prefers being hoisted in a bosun’s chair, even though she’s so-so
on sailing.
That comes from many years of roller coasters and other thrill rides.
First time one of us had to go up, I offered her a choice. Her reply was, “I’m
not going to do all of the work while you sit in that c
Mast up with a boat on jack stands is not a good idea. Many clubs
around here do not permit it
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dr.
Mark Bodnar via CnC-List
Sent: Monday, September 22, 2014 2:47 PM
To: cnc-list@cnc-list.com
Subject: Stu
Just don't ask her to go up the mast to retrieve a halyard!
Joel
On Mon, Sep 22, 2014 at 1:40 PM, Indigo via CnC-List
wrote:
> Some great advice! My wife, a very reluctant sailor, sought advice years
> ago from Edwin Gaynor (RIP). She did not act on his advice - which was " go
> racing" until
All the discussion about unstepping the mast has me wondering about the
merits of leaving it in or pulling it out for the winter.
In the owners manual for the CS 30 is states
CS Yachts does not recommend that the yacht be stored with the mast
left in place as
this places stresses on the hull a
Some great advice! My wife, a very reluctant sailor, sought advice years ago
from Edwin Gaynor (RIP). She did not act on his advice - which was " go racing"
until this year. Made all the difference - along with sailing with girl friends
on the Ideal 18s.
--
Jonathan
Indigo C&C 35III
SOUTHPORT
All,
I’ve been lucky as well, but I can offer up some good tips:
1. If you race the boat, get her on to the racing team. I know this may create
the Seinfeld-esqe paradox of “Worlds Colliding”, but her comfort level will
increase drastically when she sees the boat heeling while under the
Jim:
We should try to get US Watercraft to visit at the NW rendezvous, next year.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
- Original Message -
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com
To subscribe or unsubscribe via the World Wide Web, vis
I've been lucky. My first admiral was gung-ho for almost anything thrilling, so
sailing on the windows was not a problem. We used to take our Coronado 15
dinghy out into the ocean from Marina del Rey and up to Santa Monica and back -
surfing down the side of waves on the way back. (she then co-d
Apparently it pays to belong to a good Club.
We do, generally, the same.
Up to 5000 t (~1 lb.) boat - you can do it for free using one of the two
fixed cranes. Of course, you have to have means to move the boat from under the
crane afterwards. There are service providers that would do a c
Ouch! The club here has two smaller fixed cranes and a "pole cat" - a used
utility truck with a
boom arm. The smallest fixed crane will do masts easily up to 30 - 32' boats.
All are available
for free with volunteers operating the pole cat.
For haul out the club hires in two large cranes. So we
I think that this usually happens at the same time (and frequency) as the keel
falls off
Marek (in Ottawa)
From: Robert Abbott via CnC-List
Sent: Sunday, September 21, 2014 10:09 PM
To: Martin DeYoung ; cnc-list@cnc-list.com ; Fred Hazzard
Subject: Stus-List sailing under jib alone
I am not s
I'm looking forward to seeing the boats in Annapolis. I can dream!
Joel
On Mon, Sep 22, 2014 at 7:52 AM, David via CnC-List
wrote:
> All,
>
> Below is an excerpt from an Post Script e-mail sent out to the NE
> Rendezvous Attendees.
>
>
>- C & C Yachts/ US Watercraft were wonderful. Not o
Great video. I have a 27 V and it is nice to see one sailed so well. I wish I
had a crew that could tack that smoothly. What boat finished first? What do
you use for a main sail. I will probably get one next season. I just added a
Garhauer rigid vang. Jerry J&J C&C 27 v.
Sent from m
When one of my crew lost the cover overboard, I bought a new hawse pipe made of
polished stainless steel on EBay for about $29US. The cap on this one is on a
hinge and spring loaded so it stays in place (open the cap and slide it on the
hinge and it props open for letting out or recovering chain
Wow. The yards around here us the travel lift or a Lull with a jib boom on the
end of the forklift mast to haul masts. The going rate is $65 per hour. I've
seen a couple of masts lifted out while the boat sits in the haul out slip,
then the boat goes back to her slip while the work on the mast i
We pay about $200 to unstep and $300 for the step at my marina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Monday, September 22, 2014 9:27 AM
To: Jean-Francois J Rivard; cnc-list@cnc-list.com
Subject: Re: Stus-List c and c 29-2 mast cap
I'm in the same boat (Pun intended)
The kids dig it, every one except the dog and my wife loves to hang out on
the rail when the wind pipes up. No matter how much I tell my wife that
the lake winds and little chop are not even close to being a challenge for
a boat that was meant for offshore
FWIW,
We sometimes hire a crane tow truck to unstep masts or to lift out an
engine. Much cheaper than a boatyard.
Dennis C.
On Mon, Sep 22, 2014 at 8:27 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> You got a bargain! Cost me $400 to unstep the mast of my 35, and $800 for
>
You got a bargain! Cost me $400 to unstep the mast of my 35, and $800 for
my 28 in Annapolis!
Joel
On Mon, Sep 22, 2014 at 9:24 AM, Jean-Francois J Rivard via CnC-List <
cnc-list@cnc-list.com> wrote:
>
>I would just go ahead and pay to un-step the mast.
>
>I was all worried about that b
I would just go ahead and pay to un-step the mast.
I was all worried about that before doing it last spring. It took 10
minutes of taping the rod threads (To mark the turnbuckle position
adjustment), 10 minutes for 'Stumpy' to pick it up with the travel lift
and set it down on saw horses (
If the 29 is like the 30, then the whole top of the mast (aluminum casting)
comes off - it rests on the top of the mast, but the casting goes down inside
of the mast. The sheaves are in the top piece, and you must take it off to get
the sheave axles out. Mine is secured with about 8 stainless sc
Hi Guys,It was really great to meet you guys in Newport on Saturday. I regret
not having brought Lolita but, I had a great time none-the-less! I really
enjoyed seeing the boats and thanks to those that let me board and have a look
around! I say job well done. It's really cool to put faces to
All,
Below is an excerpt from an Post Script e-mail sent out to the NE Rendezvous
Attendees.
C & C Yachts/ US Watercraft were wonderful. Not only did they
sponsor the Saturday evening's festivities, they brought over the 30 and
the 41 for boarding and sailing. Lucky were the ones who co
48 matches
Mail list logo