Re: Stus-List Howling rigging

2015-08-02 Thread John McKay via CnC-List
I bought a 33 MK II in Toronto last fall and there was a loud hum. The hum was there on Toronto Island where I pick her up and at a marina on the mainland. I asked the owner about it and he said I have never heard that before and I thought what have I just bought myself. When I launched her in

Re: Stus-List mast tuning

2015-08-02 Thread Monty Schumpert via CnC-List
David, Check out the article Rod Rigging -- Generic Tuning by Greg Cutter in the Do It Yourself section of the CC Photo Album and Resource Center. I'm going through the same process after re-stepping the mast on my 34+ this spring. Monty Scandia 1991 CC 34+ Annapolis, MD On Fri, Jul 31, 2015 at

Re: Stus-List Howling rigging

2015-08-02 Thread Leslie Paal via CnC-List
https://en.wikipedia.org/wiki/Theodore_von_K%C3%A1rm%C3%A1n von Karman was Hungarian. I spent many hours in an auditorium named after him at JPL. Leslie. On Sat, 8/1/15, Don Wagner via CnC-List cnc-list@cnc-list.com wrote: Subject: Re: Stus-List

Re: Stus-List Howling rigging

2015-08-02 Thread Don Wagner via CnC-List
Oops! Thanks for the correction Leslie. Being an EE, not a ME or fluids guy I should be more careful. I worked at APL and our auditorium is named after a not so famous scientist. Don Wagner CC 41 CB Der Baron -Original Message- From: Leslie Paal via CnC-List Sent: Sunday, August 02,

Stus-List CC Rendezvous

2015-08-02 Thread Stu via CnC-List
Years ago when I owned a CC, I was fortunate enough to attend (and help organize) rendezvous for CC Owners. Included events took us to both the East and West coasts as well as several on the Great Lakes. Many of the events are still fresh in memory and will not be forgotten. It is a chance

Re: Stus-List Refrigerator Fan...

2015-08-02 Thread Wally Bryant via CnC-List
Well, this was a bit of installation hoopla G but it works great. I have one in the fridge and another in the freezer. http://www.wbryant.com/StellaBoat/Projects/galley/pipefan/index.htm Wal David wrote: My new refrigeration is doing quite well. However I would like to better circulate air

Re: Stus-List anti- skid pattern 35mkI

2015-08-02 Thread Glen Eddie via CnC-List
‎Hello everyone. Redoing deck on Freya IV. Does anyone have the original anti skid pattern. My boat had previously been painted with a roller and I can't tell the original pattern. Sent from my BlackBerry 10 smartphone on the Rogers network. Original Message From: Don Wagner via CnC-List

Re: Stus-List anti- skid pattern 35mkI

2015-08-02 Thread Dennis C. via CnC-List
Glen, Touché still has original nonskid pattern but I have no idea how to send it to you. Dennis C. Touché 35-1 #83 Mandeville, LA Sent from my iPhone On Aug 2, 2015, at 1:56 PM, Glen Eddie via CnC-List cnc-list@cnc-list.com wrote: ‎Hello everyone. Redoing deck on Freya IV. Does

Stus-List Summer Cruise, Speed and Sticky Situation

2015-08-02 Thread Tom Buscaglia via CnC-List
We are on day two of out annual 3 weeks in the San Juan and Gulf Islands, We'll be in Port Townsend tonight and then working our way to the Rendezvous on Thetis next weekend. If anyone is in the area let me know. You can text me on my cell 305.409.3660 if you're close. Some wierdness with

Re: Stus-List anti- skid pattern 35mkI

2015-08-02 Thread Jim Watts via CnC-List
Photo from top of mast? Jim Watts Paradigm Shift CC 35 Mk III Victoria, BC On 2 August 2015 at 14:01, Dennis C. via CnC-List cnc-list@cnc-list.com wrote: Glen, Touché still has original nonskid pattern but I have no idea how to send it to you. Dennis C. Touché 35-1 #83 Mandeville, LA

Stus-List Best prop for 34+

2015-08-02 Thread Dr. David Montgomery via CnC-List
It appears that the zincs got replaced on my drive shaft but not my Maxprop!!! Needless to say my prop is shot and I am looking at either another of the same or other options. I am hoping that some one out there with the same or similar boat can weigh in on whether the Maxprop or something else

Re: Stus-List Best prop for 34+

2015-08-02 Thread Jim Watts via CnC-List
I had the same deal with my MaxProp, except all my zincs fell off. This was before I was Enlightened to dead-blow hammers and critical painting of zincs. It cost $500 US, but the guys at PYI did a great job of rebuilding the prop. Two weeks and half a boat unit is a cheap option. Jim Watts

Re: Stus-List Best prop for 34+

2015-08-02 Thread Dr. David Montgomery via CnC-List
Jim, I just dropped my prop off at PYI to be looked over. Mine was still working but one blade was a nasty orange color and the hub had lost a lot of material… though not enough to not keep it together. How bad was yours that was repairable? Dave M. On Aug 2, 2015, at 10:45 PM, Jim Watts via

Re: Stus-List Summer Cruise, Speed and Sticky Situation

2015-08-02 Thread Jim Watts via CnC-List
I installed mine backwards once... Jim Watts Paradigm Shift CC 35 Mk III Victoria, BC On 2 August 2015 at 18:56, Bill Coleman via CnC-List cnc-list@cnc-list.com wrote: My BG speed has been erratic, slow readings or none - discovered a missing fin on the paddle wheel. Bill Coleman CC 39

Re: Stus-List Summer Cruise, Speed and Sticky Situation

2015-08-02 Thread Bill Coleman via CnC-List
My BG speed has been erratic, slow readings or none - discovered a missing fin on the paddle wheel.  Bill Coleman CC 39 Erie(with an incredible light show out over the lake over Canada) Original message From: Graham Collins via CnC-List cnc-list@cnc-list.com Date:

Re: Stus-List Summer Cruise, Speed and Sticky Situation

2015-08-02 Thread Graham Collins via CnC-List
Hi Tom The ST60 - I had this issue, it was oddly sensitive to direction - by turning the sensor very slightly it would spring into action. Another lister, who will not be named, had the same issue but it was because his (boat) bottom had 1.5 inches of mussel growth on it. The speed wheel