Re: Stus-List Solvent for cleaning winches indoors?

Simple Green works well, but can apparently etch aluminum. I'm leaning more towards kerosene these days. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 17 January 2017 at 16:48, Chuck Gilchrest via CnC-List < cnc-list@cnc-list.com> wrote: > +1 on Fred’s suggestion. But make sure you’re

Re: Stus-List Solvent for cleaning winches indoors?

+1 on Fred’s suggestion. But make sure you’re working in a well ventilated area and use gloves. Brake cleaners aren’t the healthiest solvents in the world… Chuck Gilchrest S/V Half Magic 1983 35 Landfall Padanaram, MA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Fr

Re: Stus-List Solvent for cleaning winches indoors?

I've used Simple Green to remove winch grease. Not as quick as a petroleum based solvent but will eventually do it. I usually use it to clean the winch parts AFTER I've removed the grease with mineral spirits but it should work from the start. Dennis C. On Tue, Jan 17, 2017 at 1:54 PM, Joel Aro

Re: Stus-List Solvent for cleaning winches indoors?

I clean winches in the garage or on the boat using Diesel fuel or old Kerosene. I use an acid brush to wipe the gears and wipe off gunk with terry cloth (old face cloths) and final wipe off of solvent using cotton cloth (old tee shirt). Chuck S > On January 17, 2017 at 3:15 PM ALAN BERGEN via

Re: Stus-List Solvent for cleaning winches indoors?

Joel — I’ve used this stuff before, and it’s worked well — also non-flammable: https://www.amazon.com/CRC-Brakleen-Brake-Parts-Cleaner/dp/B000LDR9HI — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on

Re: Stus-List C&C 35 Mk1 Bow Hatch Replacement

Brandon, Are you in a hurry? Maybe this is something we can ponder together. I'll be out in Colorado skiing until mid-Feb. Maybe we can get together after that. I've given this a bit of thought but always decided the curvature of the cabin top would be a challenge. Defiance has an acrylic len

Re: Stus-List C&C 35 Mk1 Bow Hatch Replacement

In the Toronto area, lots of folks go to hammerhead for hatch parts and refurbs. I haven't dealt with them personally but have recommendations from friends that have.  Hammerhead Nautical Systems | Hatch & Portlight Repair | | | | || | | | | | Hammerhead Nautical Sy

Re: Stus-List C&C 35 Mk1 Bow Hatch Replacement

The monster hatch on my 42 sits on a wooden frame installed around the deck opening. I assume it was done this way to obviate the need to make the opening the perfect size for the hatch. The wooden frame may also serve to level the surface for mounting the hatch. I should note that the 42 was

Re: Stus-List CnC-List Digest, Vol 132, Issue 37

Isn't Varsol just paint thinner? Looks like it off the market Joel On Tue, Jan 17, 2017 at 3:18 PM, bruce via CnC-List wrote: > Cleaning winches, what about Varsol? > Bruce > C C 27 Asterie > > -Original Message- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > cn

Re: Stus-List Bow Hatch Replacement

Brandon: My previous boat, an Ericson 30, had wood framed hatches. I replaced them with Bomar hatches, and removed some of the fiberglass to which the old hatches were mounted. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR I'm looking to replace my forward hatch on my C&C 35 Mk1. Dim

Stus-List C&C 35 Mk1 Bow Hatch Replacement

I'm looking to replace my forward hatch on my C&C 35 Mk1.  Dimensions are 21.625" X 25.375" OD, 20.75" X 24.5 ID.  Any suggestions on what to replace it with?  I can't seem to find anything to fit, so should I consider removing the "lip" the old hatch fit over?  Or should i epoxy in an additiona

Re: Stus-List CnC-List Digest, Vol 132, Issue 37

Cleaning winches, what about Varsol? Bruce C C 27 Asterie -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of cnc-list-requ...@cnc-list.com Sent: Tuesday, January 17, 2017 3:16 PM To: cnc-list@cnc-list.com Subject: CnC-List Digest, Vol 132, Issue 37 Sen

Re: Stus-List Solvent for cleaning winches indoors?

Although kerosene is flammable, it is still safe to use in a garage. I did my winches that way. The fumes are not volatile like gasoline fumes. Just don't be near an open flame. Let the parts soak for a while, before you scrub with a tooth brush or wire brush. When the parts are clean, wash th

Re: Stus-List Solvent for cleaning winches indoors?

Disregard my last post. The Zep Purple degreaser is flammable. I confused it with this non-flammable degreaser: Bill Bina On 1/17/2017 2:54 PM, Joel Aronson via CnC-List wrote: I removed two of my mast mounted

Re: Stus-List Solvent for cleaning winches indoors?

Bill Bina On 1/17/2017 2:54 PM, Joel Aronson via CnC-List wrote: I removed two of my mast mounted winches as they are overdue for service (about 25 years overdue). That was a job in itself, as the bolts

Stus-List Solvent for cleaning winches indoors?

I removed two of my mast mounted winches as they are overdue for service (about 25 years overdue). That was a job in itself, as the bolts had fused to the aluminum mounting plates. A combination of PB Blaster, vinegar and acetone, along with a hammer and screwdrivers got them off. The grease is

Re: Stus-List Mast Step Box 1980 CnC36

Boatyards are a different animal in Florida for a couple of reasons. First is that almost no one stores boats in boat yards because of the weather and because waterfront property is too expensive to make it work economically. To make a boat yard profitable, there has to be a steady turnover of v

Re: Stus-List Mast Step Box 1980 CnC36

I have a 1981 C&C 36, and it is keel stepped, not deck stepped. Even if your mast is keel stepped and you were some how going to raise it a bit without completely removing it, I would suggest that the process would be risky. Better to take it out and investigate the problem completely. May b

Stus-List Mast Down - Need guidance

To all, thanks very much for your input. As always, it's very helpful. Fair Winds, Pete W. '91 C&C30-2 Deltaville, Va. ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, p