I've used Simple Green to remove winch grease. Not as quick as a petroleum based solvent but will eventually do it.
I usually use it to clean the winch parts AFTER I've removed the grease with mineral spirits but it should work from the start. Dennis C. On Tue, Jan 17, 2017 at 1:54 PM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > I removed two of my mast mounted winches as they are overdue for service > (about 25 years overdue). That was a job in itself, as the bolts had fused > to the aluminum mounting plates. A combination of PB Blaster, vinegar and > acetone, along with a hammer and screwdrivers got them off. > > The grease is a gummy mess. Any recommendations on a non-flammable > solvent I can soak them in? I'm working in the garage, so diesel and > kerosene are out. > > Joel > > > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
