I draw 6' 2 and go pretty much everywhere in the islands and buzzards bay.
Westport is narrow but you can get in. Not much available on the South Cape
area but Stage Harbor, Falmouth Green Pond, Hyannis should be accessible.
Quisset, Red Brook, Marion, Onset, Mattpoisett, New Bedford, Padanaram
Google Hamilton Marine. They are in Portland and a couple other locations Down
East.
Thanks,
Mike Fair
413.587.6535
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike
via CnC-List
Sent: Monday, March 09, 2015 12:49 PM
To: schiller; cnc-list@cnc-list.com
Subject:
Sounds attractive. Please send email.
Thanks,
Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pete
Shelquist via CnC-List
Sent: Sunday, January 11, 2015 4:08 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Garmin 740 for sale
I'm considering upgrading my GPS.
The Rigging loft or (RiggingOnly.com) in Fairhaven, MA should be able to help.
They are a very good rigging shop and have been around for a long time.
Thanks,
Mike Fair
413.587.6535
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Bina -
gmail via CnC-List
Sent:
I have '94 Achilles that has spent June thru November on a mooring all it's
life. One fall after a month's absence I came to the boat and found that it
had deflated and submerged the motor. I resurrected the motor and got a quart
of the latex sealer sold to stop pin hole leaks. I added it
I am interested.
Thanks,
Mike Fair
413.587.6535
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Maturo, John
via CnC-List
Sent: Friday, August 01, 2014 11:57 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Radar chart plotter
I have 10 yr old
I replaced my whole unit with a Lavac. It uses a manual diaphragm bilge pump
(gusher style) and I have had not one issue in 7 years of operations. Minimal
moving parts and a favorite with live boards and bluewater cruisers. Cost was
under $300.
Thanks,
Mike Fair
Padanaram, MA
From: CnC-List
I'm looking for storm trysail, storm jib or possibly #3.
Thanks,
Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay
via CnC-List
Sent: Wednesday, July 23, 2014 3:02 PM
To: CNC boat owners, cnc-list
Subject: Stus-List Sails to Donate
Listers,
If 'John' was stuck in Nigeria would you send him money?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert
Abbott via CnC-List
Sent: Friday, July 11, 2014 10:07 AM
To: john.irv...@hotmail.com; JOHN D IRVIN; cnc-list@cnc-list.com
Subject: Stus-List Terrible
Pharmacies.
-Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan
Plavsa via CnC-List
Sent: Thursday, June 05, 2014 1:42 PM
To: CC List
Subject: Re: Stus-List Repositioning Mast - now compass oil
West Marine does sell it .. in the States, but not in Canada. I called
My 2 house batteries do not charge up to 12.8 V and since they are only a year
old and charge only up to 12.6V I want to try to equalize them.
Has anyone had any positive EXPERIENCE with the Pulse type chargers that claim
to have an equalize stage?
I was considering something less than $100
An excellent 25 lb bronze one came with my boat and I all ways use it. It is
very helpful if you anchor where the currents shift with the tide.
I can put 70LBs of metal near or on the bottom. But only retrieve 40lbs at a
time. Much easier on the back.
Mike
Padanaram, MA
-Original
I am looking seriously at windlasses too but have no experience.
I have a 12 -14 inch fall to my anchor locker and am not sure that is enough
for my Chain/rope rode. Any chance that would work?
Should I just get a Capstain and keep the install simple by not feeding the
rode below decks?
I
More details please.
Thanks,
Mike Fair
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles
Sent: Monday, April 14, 2014 11:30 PM
To: cnc-list Cnc-List
Subject: Stus-List Bottom paint removal
I got adventurous this year and decided to
You MUST use the Primer if you use UV295
-Mike
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
blhick...@yahoo.com
Sent: Monday, April 14, 2014 8:38 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Sealant or adhesive?
Hi Listers,
Ok so I'm
Ditto.
Thanks,
Mike Fair
Buzzards Bay
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
j...@svpaws.net
Sent: Thursday, March 27, 2014 8:20 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Honda 2000i
In the last boat, I had a nice monster of a
If it is an older unit try Marine Consignment in Warwick RI.
They have a pile of used electronics including radars.
Thanks,
Mike Fair
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eric Frank
Sent: Wednesday, February 26, 2014 10:17 AM
To:
Any recommendations for us Android tablet users?
Thanks,
Mike Fair
Finnyacht 351
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa
Sent: Wednesday, February 19, 2014 10:54 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Navigation Software
The problem with an
I have 1 inch rails, double except at the ladder where it is single. I
sometimes keep a 85 lb outboard clamped next to it and I have a radar pole
outboard to the motor with no issues.
Thanks,
Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Russo
Sent:
I chased a strong vibration for 3 years. In the end it caused my shaft seal to
leaks and rust out my oil pan and it broke a engine mount. In the end I
filann7 disassembled my gori prop and found that there was a 2 ounce difference
between the blade weights. Cost me $70 to balance and new
Same thing happens with my Volvo 30HP too.
Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Indigo
Sent: Tuesday, October 22, 2013 1:38 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Oil Change - Yanmar 3GMF
Question for anyone who does their own oil change -
Alex,
I have an electronic copy I can send along if you send me your email.
Thanks,
mike.f...@mckesson.com
413.587.6535
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Wednesday, October 09, 2013 10:22 PM
To:
I repowered with a Volvo d 1-30 and have been very pleased. It is a Perkins
block.
The few parts I have needed have been expensive but not much more than I
experienced with my old Universal. I bought a starter for the Universal before
I realized I could rebuild it. It cost $600.
Any Volvo in
a couple on Bojangles. I may have binned them when I went to a
new Raymarine pilot - but it's also possible they're still
on board. I'll check when I'm on board next month and let you know.
If I still have them, I'll bring them home.
Cheers
Colin
On 10/3/13, Fair, Mike mike.f...@mckesson.com wrote
Speaking of WP units.Does anyone have physically broken unit that might
still be electronically functional?
I would like a winter project to resurrect my old unit.
Thanks,
Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain
Sent: Thursday, October
Sounds like you have enough fuel in the engine for it to fire but soon runs
out. As if the engine is starved for fuel at low rpms.
Have you replaced you fuel filters recently?
You might have an air leak in a fuel line.
Good luck
Mike Fair
Cio Cio San
Padnaram, MA
From: CnC-List
Same thing happened to me. And I replaced with a new version of the same engine
(Volvo) and it had many differences I had not anticipated. Lot of busy work I
hadn't planned on; exhaust and controls on opposite sides, bigger mounts etc.
Being raw water cooled may prevent a rebuild if there is a
http://www.speedwaymotors.com/Performance-Tool-W80641-Windshield-Removal-Tool,8907.html?utm_medium=CSEutm_source=CSEGoogleutm_campaign=CSEGOOGLECAWELAID=1268566724catargetid=1784208710cadevice=ccagpspn=plagclid=CLut1rGth7gCFWIV7AodQBAALQ
this was what I used after not using the SikaFlex primer.
Save yourself some major hassle by ensuing the new ones you buy have the same
footprint.
Mike
Cio Cio San
Padanaram Harbor
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Nate Flesness
Sent: Wednesday, May 22, 2013 12:32 PM
To: cnc-list@cnc-list.com
Subject: Stus-List
Try this. Spring is here.
http://www.dartmouthharbormaster.com/webcam.php
Mike
Buzzards Bay, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G
Street
Sent: Thursday, May 02, 2013 9:51 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spring weather...
It
Ammonia based solutions are less caustic and have been effective for me.
mfair
Cio Cio San
Padanaram, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Persuasion
Sent: Friday, March 29, 2013 12:43 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Fw: Poly Glo removal
Fred
Does anyone have any plans that could be used to build a boarding ladder out of
wood or rope and wood? This has been on my project list for quite a while.
-Mike Fair
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G
Street
Sent: Friday, March 08, 2013 11:26 AM
To:
I also believe the whole area is slowly lifting up (rebounding) after being
burdened by the weight of a mile or so of ice during the last ice age.
Mike
Cio Cio San
Padanaram, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S
Sent: Thursday, October 04, 2012
I was at Maxwell's for a few months many years ago. Low key laid back at
the time. I moved only to be closer to the MA islands.
Mike
-Original Message-
From: cnc-list-boun...@cnc-list.com
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of b...@quickland.us
Sent: Wednesday, September 12,
I had similar sound when I began to overheat at high RPMs. Turned out to be my
heat exchanger clogged with scale.
I am now cruising at 2800 RPM/7.5 kts after cleaning the tubes.
Good luck,
Mike Fair
Padanaram, MA
From: cnc-list-boun...@cnc-list.com
35 matches
Mail list logo
