Re: Stus-List Depth sounder replacement

Fair enough.  I do buy refurbished gear sometimes as well.  I was more thinking I'm not going to try and piece together a new transducer to the old display. Raymarine doesn't have any of what I need right now in the referb section (only a depth display with no

Re: Stus-List Depth sounder replacement

I would disagree on one point. I frequently buy refurbished electronics for boat and home and have not had a problem yet. My logic is that at least the refurbished item has been specifically tested and shown to work up to spec. That is more than the standard stuff off the assembly line gets.

Re: Stus-List Depth sounder replacement

Thanks everyone for the replys. Fred - If I was going to go with the i40 instruments then I would just replace the depth sounder - I wouldn't be adding wind instruments as part of the i40 group.   Don't think I'm going to go refurbished or The big question - do

Re: Stus-List Depth sounder replacement

I put in a Raymarine Seatalkng network a few years ago with Fred’s help and am very happy with the system. I added a Airmar DST800 depth/speed/temp tri-ducer last spring that I bought on eBay which plugged right into the network and worked perfectly. It even fit into the hole from the old

Re: Stus-List Depth sounder replacement

I replaced an Autohelm depth sounder display with one I purchased from someone on the list. the transducer was ok. You can also check out the Raymarine refurbished instruments. http://www.raymarine.com/store/refurbished/. You might find something you want there. Alan Bergen 35 Mk III Thirsty Rose

Re: Stus-List Depth sounder replacement

, 2018 4:11 PM To: C List Cc: Dr. Mark Bodnar Subject: Stus-List Depth sounder replacement I'd appreciate some advice regarding a non-functioning depth sounder. Near the end of the season my depth sounder started reading 0 no matter the condition. I couldn't find any obvious explanation

Re: Stus-List Depth sounder replacement

Do the raymarine i70 package and do it right. You will love the display if you can mount everything in a pod on the coach house over your companion way entrance easily in view of all in the cockpit. You and crew will learn to sail to apparent wind angle and with an added display you may be able to

Re: Stus-List Depth sounder replacement

Mark — I would NOT consider the i40 system for wind; your only choice for a wind transducer is one suitable only for power boats. The i70 is a nice system; and yes, you do get water temp with it, as the transducer is a single depth/speed/temp transducer. And you get a much better wind

Re: Stus-List Depth sounder replacement

Will likely be on sale when the Boat Show starts in Toronto Jan 18 Sent from my iPhone > On Dec 18, 2018, at 5:10 PM, Dr. Mark Bodnar via CnC-List > wrote: > > > I'd appreciate some advice regarding a non-functioning depth sounder. > > Near the end of the season my depth sounder started

Stus-List Depth sounder replacement

I'd appreciate some advice regarding a non-functioning depth sounder. Near the end of the season my depth sounder started reading 0 no matter the condition.  I couldn't find any obvious explanation for the problem - but I'm thinking that the Autohelm

Re: Stus-List depth sounder

nc-list@cnc-list.com Cc: ahycrace ahycrace Subject: Stus-List depth sounder   Well we went in the water today and everything was good except the  depth sounder.  The  only thing that shows up on the readout is three dashes  thinking the transducer is probably bad anyone been down this path before. R

Re: Stus-List depth sounder

ent: Friday, May 4, 2018 8:07:32 PM To: cnc-list@cnc-list.com Cc: ahycrace ahycrace Subject: Stus-List depth sounder Well we went in the water today and everything was good except the depth sounder. The only thing that shows up on the readout is three dashes thinking the transducer is probably ba

Re: Stus-List depth sounder

ga...@gmail.com> Subject: Re: Stus-List depth sounder Hi Gary,     The best way to check it out is to borrow a transducer from someone else and plug it in.  See you tomorrow.GaryS/V Kaylarah'90 C 37+East Greenwich, RI, USA ~~~_/)~~ On Fri, May 4, 2018 at 8:07 PM, ahycrace ahycrace via C

Re: Stus-List depth sounder

Hi Gary, The best way to check it out is to borrow a transducer from someone else and plug it in. See you tomorrow. Gary S/V Kaylarah '90 C 37+ East Greenwich, RI, USA ~~~_/)~~ On Fri, May 4, 2018 at 8:07 PM, ahycrace ahycrace via CnC-List < cnc-list@cnc-list.com> wrote: > Well

Stus-List depth sounder

Well we went in the water today and everything was good except the depth sounder. The only thing that shows up on the readout is three dashes thinking the transducer is probably bad anyone been down this path before. Raymarine st60s. Gary K

Re: Stus-List Depth Sounder

gt; Sent: Thursday, September 14, 2017 6:27:34 PM To: Steven A. Demore; cnc-list@cnc-list.com Cc: schiller Subject: Re: Stus-List Depth Sounder I'm confused. Does your friend need the transducer (wind vane and cups) or the display. The transducer is available from several sources (Defender, for o

Re: Stus-List Depth Sounder

; > > Steve > > > > SV Doin’ It Right > 1973 C 30 MK1 > Pasadena, MD > > > > *From:* schiller [mailto:schil...@bloomingdalecom.net > <schil...@bloomingdalecom.net>] > *Sent:* Thursday, September 14, 2017 9:15 AM > *To:* cnc-list@cnc-list.com

Re: Stus-List Depth Sounder

e SV Doin’ It Right 1973 C 30 MK1 Pasadena, MD *From:*schiller [mailto:schil...@bloomingdalecom.net] *Sent:* Thursday, September 14, 2017 9:15 AM *To:* cnc-list@cnc-list.com *Subject:* Re: Stus-List Depth Sounder Paul, No.  The transducer is at the bottom of Lake Michigan.  It went when the

Re: Stus-List Depth Sounder

Neil: I responded directly to your email address. Check your spam file. Alan On Thu, Sep 14, 2017 at 4:32 AM, schiller via CnC-List < cnc-list@cnc-list.com> wrote: > Alan, > > I have an ST60 display unit available from the old Redwing 35 (as well as > Speed and Wind). I didn't try to remove

Re: Stus-List Depth Sounder

c-list@cnc-list.com *Cc:* schiller <schil...@bloomingdalecom.net> *Subject:* Re: Stus-List Depth Sounder Alan, I have an ST60 display unit available from the old Redwing 35 (as well as Speed and Wind).  I didn't try to remove any transducers.  The new boat came with i50/i60 instruments.

Re: Stus-List Depth Sounder

To: cnc-list@cnc-list.com Cc: Paul Fountain Subject: Re: Stus-List Depth Sounder Neil, Did you keep the wind transducer? I have a friend who needs one from an ST60 (with cable if possible) … From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of schiller via CnC-List Sent: Thursday

Re: Stus-List Depth Sounder

hil...@bloomingdalecom.net> Subject: Re: Stus-List Depth Sounder Alan, I have an ST60 display unit available from the old Redwing 35 (as well as Speed and Wind). I didn't try to remove any transducers. The new boat came with i50/i60 instruments. Make me an offer. Neil Schiller 1983 C 35, Ma

Re: Stus-List Depth Sounder

Alan, I have an ST60 display unit available from the old Redwing 35 (as well as Speed and Wind).  I didn't try to remove any transducers. The new boat came with i50/i60 instruments. Make me an offer. Neil Schiller 1983 C 35, Mark III, #028 "Grace" White Lake, Michigan On 9/13/2017 10:41

Re: Stus-List Depth Sounder

I'm looking for a new (used) display. I tried a new transducer, and that didn't cure the problem. I also checked all wiring from the transducer to the display. Alan On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List < cnc-list@cnc-list.com> wrote: > Alan, > > What exactly are you

Re: Stus-List Depth Sounder

Alan, What exactly are you looking for? The thru-hull depth sounder? Display? Something else? Best, Dave Godwin 1982 C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List

Stus-List Depth Sounder

Does anyone have a Depth sounder they want to sell or give away? I'm looking for a Raymarine ST50, ST60 or ST60+ -- Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR ___ This list is supported by the generous donations of our members. If you

Re: Stus-List Depth sounder installation

Mike — part of the reason to use a backing block is to make sure you have a flat spot in the rounded hull to mount the transducer; it’s not so much for reinforcement. It also gives you more of the shaft of the transducer to seal with whatever goop you use as a sealant; I use LifeSeal when I

Stus-List Depth sounder installation

Hi gang, Last fall I wrote about removing my depth sounder as water was leaking in. It was a traditional external depth sounder with a mushroom head. It was held in place with a locking nut that screwed down against a wood backing block. I dug out the rotten wood and ground down all the

Stus-List depth sounder offset

Dennis: I use the same method as you, actual offset from the transducer to the bottom of the keel so the dept shown closely matches the charted depth. As with you, I don't want to do additional math. I think my draft is 5' 8".this Summer, I was in a situation where the depth instrument