Stus-List Exterior Teak hand rails and trim

2021-10-02 Thread Donald Kern via CnC-List
There was discussion on teak and what was the best application to apply.  However, on my '74 C Mk2 the exterior trim and handrails have been bare for the last 10 years (the varnish flacked off).  I kind of like the look of the lightly greyed teak, what are the disadvantages of not putting a

Re: Stus-List Exterior Teak

2018-02-09 Thread BillBinaList via CnC-List
New, but worth investigating: http://www.pettitpaint.com/products/varnish-wood-finishes/exterior-varnish/seagold/ Bill Bina On 2/9/2018 7:03 PM, Dennis C. via CnC-List wrote: That would be my guess, also.  If I ever "lose" the Cetol, I'm definitely going to consider stripping the Cetol and

Re: Stus-List Exterior Teak

2018-02-09 Thread Dennis C. via CnC-List
That would be my guess, also. If I ever "lose" the Cetol, I'm definitely going to consider stripping the Cetol and switching to Awlwood with proper prep, of course. Knock on wood (LOL), the Cetol will last a few more years. Dennis C. Touche' 35-1 #83 Mandeville, LA On Feb 9, 2018 2:42 PM,

Re: Stus-List Exterior Teak / sanding between coats

2018-02-09 Thread Matthew L. Wolford via CnC-List
From: William Hall via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: William Hall <wh...@alum.mit.edu> Sent: Friday, February 9, 2018 12:08 PM Subject: Re: Stus-List Exterior Teak

Re: Stus-List Exterior Teak

2018-02-09 Thread Dave Godwin via CnC-List
Dennis, Haven’t reviewed the instructions recently but I am fairly certain that you’ll need to get to clean, bare wood if you use the Primer. There seems to be cases of overcoating other products but I didn’t see Cetol mentioned.

Re: Stus-List Exterior Teak

2018-02-09 Thread Dennis C. via CnC-List
Thanks for the feedack on Awlwood everybody. My Cetol is in good conditionfor now. I've said in previous posts that I would definitely be amenable to switching to Awlwood. Cetol has been around for many years now. I'm guessing that the folks at Awlgrip have figured out how to produce a

Re: Stus-List Exterior Teak

2018-02-09 Thread Frederick G Street via CnC-List
gt; Cc: Joel Aronson <joel.aron...@gmail.com <mailto:joel.aron...@gmail.com>> > Sent: Fri, Feb 9, 2018 2:40 pm > Subject: Re: Stus-List Exterior Teak > > Photo would not load, but if it didn't look great Fred wouldn't have shared > it! ___

Re: Stus-List Exterior Teak

2018-02-09 Thread bushmark4--- via CnC-List
<cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Joel Aronson <joel.aron...@gmail.com> Sent: Fri, Feb 9, 2018 2:40 pm Subject: Re: Stus-List Exterior Teak Photo would not load, but if it didn't look great Fred wouldn't have shared it!

Re: Stus-List Exterior Teak

2018-02-09 Thread Joel Aronson via CnC-List
Frederick G Street via CnC-List <cnc-list@cnc-list.com> > Date: 2/9/18 12:06 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Frederick G Street <f...@postaudio.net> > Subject: Re: Stus-List Exterior Teak > > Dennis — I did NOT do any sanding after the initi

Re: Stus-List Exterior Teak / sanding between coats

2018-02-09 Thread Bruce Whitmore via CnC-List
<cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: William Hall <wh...@alum.mit.edu> Sent: Friday, February 9, 2018 12:08 PM Subject: Re: Stus-List Exterior Teak / sanding between coats This summer I discovered varnish in a spray can.  I decided to try it on m

Re: Stus-List Exterior Teak

2018-02-09 Thread detroito91 via CnC-List
Fred .. wow..a job well doneSomething can shoot for.Jim schwartz  Original message From: Frederick G Street via CnC-List <cnc-list@cnc-list.com> Date: 2/9/18 12:06 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Frederick G Street <f...@postaudio.net> Subject: Re

Re: Stus-List Exterior Teak

2018-02-09 Thread Dave Godwin via CnC-List
50 <tel:(401)%20419-4650> (cell) >> >> >> From: CnC-List <cnc-list-boun...@cnc-list.com >> <mailto:cnc-list-boun...@cnc-list.com>> on behalf of Dennis C. via CnC-List >> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> &g

Re: Stus-List Exterior Teak

2018-02-09 Thread Matthew L. Wolford via CnC-List
error. From: Dennis C. via CnC-List Sent: Friday, February 09, 2018 11:43 AM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Exterior Teak Dave, You're not an unwanted guest. I actually agree with your opinion to some degree. I was walking piers one day and saw a Pearson 365

Re: Stus-List Exterior Teak / sanding between coats

2018-02-09 Thread William Hall via CnC-List
two coats. Is that >> for looks? Hardness? Both? >> >> Thanks in advance. >> >> David F. Risch >> (401) 419-4650 (cell) >> >> >> -- >> *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Denn

Re: Stus-List Exterior Teak

2018-02-09 Thread Frederick G Street via CnC-List
Dennis — I did NOT do any sanding after the initial wood preparation; nothing between coats. The first coat of AwlWood is a colored or clear primer coat; apply with a rag, and let dry for twenty-four hours. The finish coats go on well with disposable foam brushes; thin coats, with a redcoat

Re: Stus-List Exterior Teak

2018-02-09 Thread Matthew L. Wolford via CnC-List
--- From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. via CnC-List <cnc-list@cnc-list.com> Sent: Wednesday, February 7, 2018 2:18 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Exterior Teak I used teak oil on the toe rails of my p

Re: Stus-List Exterior Teak

2018-02-09 Thread Ken Heaton via CnC-List
t;http://roninrebuild.blogspot.com/> >> >> On Feb 9, 2018, at 9:10 AM, David via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> So those using Cetol and putting gloss as the last two coats. Is that >> for looks? Hardness? Both? >> >> Thanks in advance. >> >> David F.

Re: Stus-List Exterior Teak

2018-02-09 Thread Dennis C. via CnC-List
Both? > > Thanks in advance. > > David F. Risch > (401) 419-4650 (cell) > > > -- > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. > via CnC-List <cnc-list@cnc-list.com> > *Sent:* Wednesday, February 7, 201

Re: Stus-List Exterior Teak

2018-02-09 Thread Dave Godwin via CnC-List
nc-list.com > <mailto:cnc-list@cnc-list.com>> > To: cnc-list <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> > Cc: Randy Stafford <randal.staff...@icloud.com > <mailto:randal.staff...@icloud.com>> > Sent: Fri, Feb 9, 2018 9:57 am > Subject: Re: Stus-

Re: Stus-List Exterior Teak

2018-02-09 Thread Frederick G Street via CnC-List
Careful, you’re shouldering into Stu’s territory… :^) — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C Landfall 38) -- on the hard in Bayfield, WI :^( > On Feb 9, 2018, at 10:26 AM, Dennis C. via CnC-List > wrote: > > Send Dennis money. Send Dennis money. >

Re: Stus-List Exterior Teak

2018-02-09 Thread Dennis C. via CnC-List
list <cnc-list@cnc-list.com> Cc: Randy Stafford <randal.staff...@icloud.com> Sent: Fri, Feb 9, 2018 9:57 am Subject: Re: Stus-List Exterior Teak I did it because Dennis said so. :) Cheers, Randy On Feb 9, 2018, at 7:10 AM, David via CnC-List <cnc-list@cnc-list.com> wrote: So t

Re: Stus-List Exterior Teak

2018-02-09 Thread Joel Aronson via CnC-List
Both? > > Thanks in advance. > > David F. Risch > (401) 419-4650 (cell) > > > -- > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. > via CnC-List <cnc-list@cnc-list.com> > *Sent:* Wednesday, Februar

Re: Stus-List Exterior Teak

2018-02-09 Thread Frederick G Street via CnC-List
My experience with AwlWood so far has been good, as well. I have some small repairs to do to the forward handrails this spring, so will be able to report back on that process; but after a couple of seasons, the handrails and Dorade boxes look like they did when they left my garage after

Re: Stus-List Exterior Teak

2018-02-09 Thread Dave Godwin via CnC-List
;> > Sent: Wednesday, February 7, 2018 2:18 PM > To: CnClist > Cc: Dennis C. > Subject: Re: Stus-List Exterior Teak > > I used teak oil on the toe rails of my previous boat. I religiously oiled > them every few months. After a few months, they looked like crap. > > On To

Re: Stus-List Exterior Teak

2018-02-09 Thread bushmark4--- via CnC-List
- From: Randy Stafford via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Randy Stafford <randal.staff...@icloud.com> Sent: Fri, Feb 9, 2018 9:57 am Subject: Re: Stus-List Exterior Teak I did it because Dennis said so. :) Cheers, Randy On Feb 9, 201

Re: Stus-List Exterior Teak

2018-02-09 Thread Randy Stafford via CnC-List
gt; David F. Risch > (401) 419-4650 (cell) > > > From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. via > CnC-List <cnc-list@cnc-list.com> > Sent: Wednesday, February 7, 2018 2:18 PM > To: CnClist > Cc: Dennis C. > Subject: Re: Stus-Lis

Re: Stus-List Exterior Teak

2018-02-09 Thread Dennis C. via CnC-List
hanks in advance. > > > David F. Risch > > (401) 419-4650 (cell) > > > -- > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis C. > via CnC-List <cnc-list@cnc-list.com> > *Sent:* Wednesday, February 7, 2018 2:18 P

Re: Stus-List Exterior Teak

2018-02-09 Thread David via CnC-List
-list@cnc-list.com> Sent: Wednesday, February 7, 2018 2:18 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Exterior Teak I used teak oil on the toe rails of my previous boat. I religiously oiled them every few months. After a few months, they looked like crap. On Touche' I use Cetol. Five

Re: Stus-List Exterior Teak (John and Maryann Read)

2018-02-09 Thread Brien Sadler via CnC-List
John and Maryann, We love here as well and the previous owners were very helpful. They are great people. We are at Thames Yacht Club during the summer and still up at Midway in the winter. Brien Sadler S/V TAZ 1987 C 35-3 ___ Thanks everyone for

Re: Stus-List Exterior Teak

2018-02-08 Thread John and Maryann Read via CnC-List
? John and Maryann Legacy III 1982 C 34 Noank, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Wednesday, February 07, 2018 2:19 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Exterior Teak I used teak oil on the toe rails of my

Re: Stus-List Exterior Teak

2018-02-07 Thread Matthew L. Wolford via CnC-List
that there was an adhesion issue. You can see “bubbling” underneath the varnish (or whatever it is). I haven’t decided what to do about it. From: Dennis C. via CnC-List Sent: Wednesday, February 07, 2018 2:18 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Exterior Teak I used teak oil

Re: Stus-List Exterior Teak

2018-02-07 Thread Della Barba, Joe via CnC-List
. via CnC-List Sent: Wednesday, February 07, 2018 2:19 PM To: CnClist <CnC-List@cnc-list.com> Cc: Dennis C. <capt...@gmail.com> Subject: Re: Stus-List Exterior Teak I used teak oil on the toe rails of my previous boat. I religiously oiled them every few months. After a few months, they

Re: Stus-List Exterior Teak

2018-02-07 Thread Dennis C. via CnC-List
I used teak oil on the toe rails of my previous boat. I religiously oiled them every few months. After a few months, they looked like crap. On Touche' I use Cetol. Five coats Cetol Marine followed by three coats Cetol Gloss. Then a coat of Cetol gloss twice a year. Over ten years in the

Re: Stus-List Exterior Teak

2018-02-07 Thread Randy Stafford via CnC-List
I had a pretty good test of that in the past year. Last offseason I replaced Grenadine’s exterior cabintop teak handrails with new ones fabricated by my buddy Jerrod Milton. I finished the new ones (and the teak piece under the traveler) with five coats of Cetol Marine Natural Teak followed

Stus-List Exterior Teak

2018-02-07 Thread Brien Sadler via CnC-List
My exterior teak is starting to show signs of wear and it's time to refinish it. It looks as though it has been varnished in the past but was wondering if anyone has just used teak oil on their exterior wood. Looking for recommendations. Brien Sadler S/V TAZ C 35-3

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread coltrek via CnC-List
com>, cnc-list@cnc-list.com Cc: BillBinaList <billbinal...@gmail.com> Subject: Re: Stus-List Exterior Teak Varnish Recommendation? That stuff is not formulated for use on wood, or over Cetol! Being a two-part urethane, it will also be a major job to strip off when it

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread Joe Della Barba via CnC-List
David Knecht <davidakne...@gmail.com> Subject: Re: Stus-List Exterior Teak Varnish Recommendation? Anyone not finishing teak with varnish and letting it weather (oil/sealer instead) as an alternative? Dave Aries 1990 C 34+ New London, CT

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread BillBinaList via CnC-List
* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Bill Bina - gmail via CnC-List <cnc-list@cnc-list.com> *Sent:* Thursday, March 2, 2017 11:13:20 AM *To:* cnc-list@cnc-list.com *Cc:* Bill Bina - gmail *Subject:* Re: Stus-List Exterior Teak Varnish Recommendation? Putting anyth

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread David Knecht via CnC-List
Anyone not finishing teak with varnish and letting it weather (oil/sealer instead) as an alternative? Dave Aries 1990 C 34+ New London, CT ___ This list is supported by the generous donations of our members. If you wish to make a contribution to

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread T power via CnC-List
k<http://aka.ms/weboutlook> From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Bill Bina - gmail via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, March 2, 2017 11:13:20 AM To: cnc-list@cnc-list.com Cc: Bill Bina - gmail Subject: Re: St

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread Bill Bina - gmail via CnC-List
Putting anything on top of Cetol sort of defeats its main advantage. Cetol breathes, which is beneficial to the wood, and maintenance is easy because a quick scrub with plain water and a 3M kitchen scrubby is all the prep work usually required to add a fresh coat or two when needed. The slight

Stus-List Exterior Teak Varnish Recommendation?

2017-03-02 Thread Chuck Saur via CnC-List
Our boatyard manager (graduate of Great Lakes School of Wooden Boatbuilding) told me Cetol should be coated with at least 2 coats of Captain's Varnish (or similar?). Says Cetol finish by itself is too soft for his liking. Has worked great for me... *Chuck Saur* (517)-490-5926

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread Dennis C. via CnC-List
To: *"cnc-list" <cnc-list@cnc-list.com>, "andy stafford" < > andy.staff...@comcast.net> > *Cc: *"Patrick Davin" <jda...@gmail.com> > *Sent: *Wednesday, March 1, 2017 3:17:35 PM > *Subject: *Re: Stus-List Exterior Teak Varnish Recomm

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread RANDY via CnC-List
t; Cc: "Patrick Davin" <jda...@gmail.com> Sent: Wednesday, March 1, 2017 3:17:35 PM Subject: Re: Stus-List Exterior Teak Varnish Recommendation? Just curious, why would you want to do 5 coats of Cetol followed by 3 coats of Cetol Gloss? The instructions on the can recommend 3 coat

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread Patrick Davin via CnC-List
cnc-list@cnc-list.com> > Cc: > Bcc: > Date: Wed, 1 Mar 2017 18:53:08 +0000 (UTC) > Subject: Re: Stus-List Exterior Teak Varnish Recommendation? > Thank you all for the responses and recommendations. > > For better or worse I've decided to go with Sikkens Cetol Natural Teak >

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread RANDY via CnC-List
quot; <joel.aron...@gmail.com> Sent: Wednesday, March 1, 2017 7:12:55 AM Subject: Re: Stus-List Exterior Teak Varnish Recommendation? Jamestown distributors has a varnish survey. Might be worth a look. On The Office I used Cetol Natural Teak and was generally happy with it. O

Stus-List Exterior teak varnish

2017-03-01 Thread Bmue via CnC-List
We have used and liked Epifane, easy to work with (even the husband can manage ;) ) seems to last well, not peeling off, seems to fade nicely, which makes for easy touch ups. Cheers, Bettina ___ This list is supported by the generous donations of

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread Bill Bina - gmail via CnC-List
One popular technique in the tropics is to fill and seal the grain using epoxy and then painting the wood with Sears Weatherbeater house paint or similar, of a "woody color". This holds up for a very long time under the unrelenting tropical sun, and since the paint will not have touched the

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread Steve Thomas via CnC-List
Randy, I have been using Cetol for years on the Great Lakes, and so applied it last winter to the much neglected teak on my Florida project boat. One summer of southern sunshine (and one hurricane) and it needs it another coat. I will take a little more care this year and put more

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-03-01 Thread Joel Aronson via CnC-List
liments on those hatch boards! Lol > > Danny > > Sent from my T-Mobile 4G LTE Device > > Original message > From: RANDY via CnC-List <cnc-list@cnc-list.com> > Date: 2/28/17 2:53 PM (GMT-05:00) > To: cnc-list <cnc-list@cnc-list.com> > Cc:

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Danny Haughey via CnC-List
;cnc-list@cnc-list.com> Cc: RANDY <randy.staff...@comcast.net> Subject: Stus-List Exterior Teak Varnish Recommendation? Listers- Grenadine's new exterior handrails are ready for finish and installation.   Wanted to see if any of you have a preferred varnish for exterior teak.  I'm l

Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Daniel Sheer via CnC-List
I like Cetol, but I don't use it on my exterior teak. I'm a Semco believer. When I got Pegathy the exterior varnish was useless. Had to be stripped off. It was a Royal Paine Diaz, as Click and Clack would say. I put on two coats of Semco Honeytone. Had to put on a third later that year. Next

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Michael Brown via CnC-List
I have been using Cetol for a while, same gallon can for 10 years. It is basically an oil based teak coloured stain, completely different from a varnish. It works well on Lake Ontario and when the exuberance during racing requires a touch up I also like the ease of maintenance. What is the

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Fred Hazzard via CnC-List
I like how easy Cetol is to repair dings and scratches. A light feathering sand and apply another coat. Fred Hazzard S/V Fury Portland, Or On Feb 28, 2017 1:12 PM, "Dennis C. via CnC-List" wrote: I've been using Sikkens Cetol for years. 5 coats Cetol then 3 coats

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Dave Godwin via CnC-List
Randy, I’ll throw in with Awlwood MA. It’s a bit dear price-wise but I’ve found that it floats out well and that fewer coats are needed to achieve the same depth of gloss that regular varnish requires, ergo less work. Keep in mind that it is a two-oars (first coat of Primer Clear then

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Dennis C. via CnC-List
I've been using Sikkens Cetol for years. 5 coats Cetol then 3 coats clear. Maintenance coat of clear every 6 months. Seems to hold up well in the Gulf Coast sun and heat. BTW, don't use Cetol light. Tried that once. Not pleased. However, I hear good things about Awlwood. If I have to strip

Re: Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread Frederick G Street via CnC-List
Gary — I’ve tried Sikkens in the past, and was less than happy with the results. Last winter, I decided to try Awlwood on my handrails and Dorade boxes, and was very pleased with the results. I hope to do my toerail this spring. It looks like this product is going to hold up well, with a

Stus-List Exterior Teak Varnish Recommendation?

2017-02-28 Thread RANDY via CnC-List
Listers- Grenadine's new exterior handrails are ready for finish and installation. Wanted to see if any of you have a preferred varnish for exterior teak. I'm looking for a clear varnish with UV protection. Cheers, Randy ___ This list is