Sounding good. We changed out our cabintop winches for the 30 ST's as well,
it was a good upgrade. We went with Lewmar clutches too.
Hope you have a great season!
Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC
On Mon, 22 Apr 2019 at 16:36, schiller via CnC-List
wrote:
> So, this is our
So, this is our second full year with our new (to us) C 35-3. This
springs splash projects have been to paint the bottom (VC17M) and wash
and wax the topsides (Aurora Boat Clean, Boat Scrub, Black Streak
Remover followed by Boat Shine) but this year we also decided to tackle
the boot stripes
:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via
CnC-List
Sent: Thursday, April 5, 2018 11:34 AM
To: cnc-list@cnc-list.com
Cc: Chuck S
Subject: Re: Stus-List Spring Projects
Hadn't hauled the last two years so I have a rather long list. It's like a
refit:
Rewire the mast, changed
Hadn't hauled the last two years so I have a rather long list. It's like a
refit:
Rewire the mast, changed all lights to LED (mast is out)
Replace sheeves and axles
Replace upper section of furler
Removed all halyards and washed, scrubbed and soaked in Downy to soften them.
Replace two halyards,
, 2018 2:16 PM
To: Edd Schillay via CnC-List
Cc: Edd Schillay
Subject: Stus-List Spring Projects
Listers,
Now that April is finally here, I was curious as to what you have planned for
your Spring projects.
On the Enterprise:
1. Remove and service hydraulic autopilot pump
2. Re-vinyl Starfleet
Hi Edd,
I spent the Easter Weekend in our local
anchorage, with a few other boats & friends. Cool
on Sunday morning but got the cabin to 60F soon
enough to make coffee. Nice way to spend a 34th wedding anniversary.
Some time during the weekend I made a list of
"deck tasks". Mostly pretty type
I have a few things on my list this spring.
I’m finishing my rebuilding of the battery box. I started the project last
spring and didn’t finish it before I splashed…
Rebuilding the folding prop
Replacing the cutless bearing (ugh)
Wiring up my Actisense between my Garmin GPS and the
Replace Engine mounts
Shaft Log
Cutlass bearing
Prop
Holding Tank
Move depth and speed instrument to newly made over the companionway pod
re-seal main cabin windows
If there is any budget left over:
re-install teak and holy floor
--
Cheers,
Jeff Nelson
Muir Caileag
C 30
Armdale
Hmmm...check the expiration date on the sunscreen, inventory beers, check
level in little propane cylinders...go sailing?
Headed to boat tomorrow for short cruise from Pensacola to Navarre Beach
and back.
Projects? Well, if it doesn't interfere with sailing.
Replace portlight lenses (aluminum
here is, I would like to know how they do
> that.
>
>
>
> Marek
>
>
>
> *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* Tuesday, April 3, 2018 14:06
> *To:* cnc-list <cnc-list@cnc-list.com>
>
. Wait,
wait and rush.
Marek
1994 C270 Legato
Ottawa, ON
From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Edd Schillay via
CnC-List
Sent: Tuesday, April 3, 2018 13:16
To: Edd Schillay via CnC-List <cnc-list@cnc-list.com>
Cc: Edd Schillay <e...@schillay.com>
Subject
on...@gmail.com>
Subject: Re: Stus-List Spring Projects
Well into the Spring list:
Confirmed I hate drilling stainless.
Joel
Hylas 44
Atlantis
Formerly C 35 The Office
___
Thanks everyone for supporting this list with your contributions. Each and
ev
Replacing broken rope clutches on deck.
Re-bedding some hatches and other suspected leaks.
Painting spreaders and touch up on the mast.
Fix some stuff on the mast.
Paint bottom
Wax hull
I am past the point of no return on the windows. The one pic shows the
average size chunk that has come
l 3, 2018 1:20:50 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Frederick G Street
> *Subject:* Re: Stus-List Spring Projects
>
> Edd — nothing to hate here — we’re getting another several inches of snow
> today, then again later this week. That’s in Minneapolis; up north on Lake
>
-list@cnc-list.com>
Sent: Tuesday, April 3, 2018 1:20:50 PM
To: cnc-list@cnc-list.com
Cc: Frederick G Street
Subject: Re: Stus-List Spring Projects
Edd — nothing to hate here — we’re getting another several inches of snow
today, then again later this week. That’s in Minneapolis; up north on Lake
Su
Edd — nothing to hate here — we’re getting another several inches of snow
today, then again later this week. That’s in Minneapolis; up north on Lake
Superior where the boat lives, I could probably climb up the snowbank to the
deck and not use the ladder… :^(
My marina thinks they’re going
Listers,
Now that April is finally here, I was curious as to what you have planned for
your Spring projects.
On the Enterprise:
1. Remove and service hydraulic autopilot pump
2. Re-vinyl Starfleet markings
3. Service Refrigeration
4. Install new hot water heater
5. Paint bottom
… and if
My spring project is to sell my 1984 C+C 29 mkll now on the hard at City
Island, New York. Details can be found on sailing Texas.
Bob Dryer
bobdr...@comcast.net
___
This List is provided by the CC Photo Album
http://www.cncphotoalbum.com
, 21 Mar 2014 10:23:33 -0400
From: Stevan Plavsa stevanpla...@gmail.com
To: cnc-list@cnc-list.com cnc-list@cnc-list.com
Subject: Re: Stus-List Spring Projects
Message-ID:
CADdEvn6E9xDNcLL2cBk421qGrh1WgCP_5otu9MG_te2E9_yD=q...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
Listers,
Now that Spring has finally sprung, I was curious to see what other
listers have planned for their Spring projects on their CCs.
So far, planned for the Enterprise:
Relocate engine gauges and move engine-starting switches.
change transmission/throttle controls at
On Suhana:
- Paint boot stripes (brightside or perfection, haven't decided yet but
keeping original CC red/blue/darker blue)
- bottom paint
- repack stuffing box
- dismantle pedestal and inspect steering components, replace/repair as
necessary
- Ambitious but, repaint pedestal.
- exhaust hose
Ed
Are you done with racing? If not then shouldn't you upgrade the Warp
drive?
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd
Schillay
Sent: Friday, March 21, 2014 11:14 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Spring Projects
Listers
...@impgroup.com wrote:
Ed
Are you done with racing? If not then shouldn’t you upgrade the Warp drive?
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd
Schillay
Sent: Friday, March 21, 2014 11:14 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Spring Projects
Don't forget, your spring re-commissioning checklist can be found on the
Photoalbum website in the DIY section. You can go to it directly at:
http://www.cncphotoalbum.com/download/checklist.pdf
Brought to you by your wonderful list-funded CC resource site.
Support for this checklist and other
-list.com
Subject: Re: Stus-List Spring Projects
Mike,
Not done with racing just yet, but certainly winding down. I
have trouble getting crew to commit to weekends (families and wives and
such) and my local racing association is slowly imploding, so weeknight
racing my be history
Completed (not by me)
Cutlass bearing
Re do Max Prop
repack stuffing box
Paint bottom (next week)
(by me)
new clutches - port side
2 new thru hulls/seacocks in bow
New hoses for head/relocate vented loops for more storage under vee berth
Remove/replace plotter
Boot stripes - Red/Sapphire Blue
The water is still a bit too solid here for launching
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson
Sent: Friday, March 21, 2014 11:57 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Spring Projects
Completed (not by me)
Cutlass bearing
Re do Max
-
From: Hoyt, Mike
To: cnc-list@cnc-list.com
Sent: Friday, March 21, 2014 11:09 AM
Subject: Re: Stus-List Spring Projects
The water is still a bit too solid here for launching
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson
Sent: Friday, March 21
The wx here in Maryland has been beyond frustrating. For at least the last
month it seems every week includes a perfect day for sailing and a snow storm!
Joe Della Barba
Coquina
___
This List is provided by the CC Photo Album
29 matches
Mail list logo