[EMAIL PROTECTED] writes:
The install found my card, but gave me an "insmod" error. It found it after
I installed 7.0, too. It couldn't find DHCP, so I installed DHCP. It got
further now, but still never becomes recognized in ifconfig. It times out
with the DHCP. Please help!
Stefan van der Eijk [EMAIL PROTECTED] writes:
I just installed xanim, and the daily security report says that
some of it's files are world writeable:
i thought it's was corrected, i upload a new fix.
--
MandrakeSoft http://www.mandrakesoft.com/
On Sat, Jan 29, 2000 at 10:52:39AM -0500, Jeff Garzik wrote:
Pixel wrote:
Jeff Garzik [EMAIL PROTECTED] writes:
If you use the linear option, you can bust with 1024 cyl barrier with
current production LILO too.
are u sure? lilo does not use the extended bios function
I have no problems with same motherboard with a K6-2-400. (different video
configuration) It is still acting flacky. (I'm not sure if the
distributed.net client is conflicting with something or if it is the setup
itself. If I don't run the dnetc utility then it will run for more than a day
[EMAIL PROTECTED] wrote:
On Sun 30 Jan at 21:42:13 -0700 [EMAIL PROTECTED] done said:
It has to be your CDROM.
I downloaded the Mandrake 7 .iso and burned it to CD.
I have installed it on 4 different computers with no problems at all.
Unless you have some very strange computers.
Where do they keep the most recent Mandrake 7 .iso???
Have a nice day,
__
"If you're not a liberal by age 20, you have no heart "
"If you're not a conservative by age 40, you have no brain"
- Original Message -
From: Patrick L. Dartez [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 31, 2000 9:41 AM
Subject: Re: [Cooker] mandrake70.iso
That's very interesting. Although I wasn't the only one experiencing
this problem IIRC.
-Charlie
I also had no
Roger wrote:
thought it had to be xfree 3.3.5 was needed. not a lower version.
it looks pretty good as is. unless you saw a miraculous improvement, if it's
not broken, why break it? ...is it really easy to install, or do you have to
follow the instructions to the "T" on extracting to
rhsound detects it right but it says sound blaster timeout. Lothar
detects it as a Yamaha XWave and you only hear Linus say "hi".
Here is what dmesg reports:
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 3.01 detected OK (220)
sb: Interrupt test on IRQ5 failed -
So if i do not install teh mdk release with smp (as defaulted) then it will
install with the apci (or auto poweroff feature at shutdown)?
question tho', how does one make sure they dont' end up with a "smp install"
when install mdk 7.0? :)
On Fri, 28 Jan 2000, you wrote:
Roger wrote:
On Sun, 30 Jan 2000, Jacky Ouin wrote:
This is stupid Question, but here it is..Is there a Dos/Win app that will
compare the md5sum on a file?
You can use cygwin to compile the Unix version for dos/win...
Jeff
If I can offer a comment on this: The Mandrake 7.0 install scripts
could explain the LINEAR option a little better --- the current prompt
only says that this option is not recommended for floppy-disks; it
should say this option is recommended for large hard disks. I'm only
guessing, but I don't
The 7.0 installation script builds an fstab that places the dos
partition at /mnt/DOS-hda or some such; on systems (like both of mine
;) where a dos partition was already in the fstab and used to link in
essential files such as fonts and sound files, this caused all
symlinks into the dos
as we speak, just sent a request to www.mandrakeuser.org on this one to get
published. eh, now hopefully it works. think i'll work on it today.
On Sun, 30 Jan 2000, you wrote:
Roger wrote:
eh...not yet. still have to build that puppy but havn't gotten around to it.
will be soon tho'.
as long as my sblive still works!
On Sun, 30 Jan 2000, you wrote:
delay it for kernel 2.4 and php4 and kde 2!
Maybe by that time the kinks will be worked out (congratz on putting together
a killer distro!)
-Guido
--
Sent from:
Lattitude (deg):32.7130
Longitude
LILO may be able to break the 1024 cylinder barrier, but it _cannot_ break
the 8G barrier,. This is bacause of how lilo stores the sector address. The
address is only 24bits + drive specifier (8bits, 1 used as LINEAR address
identifier)+ sector count (8 bits).
Yah, the LILO 1st stage loader
I installed quite well Mandrake7 yesterday. I tried t make a ghost on my
vfat partition where Windoz is installed.
Besides, i installed glib1.0 and gtk1.0 from mandrake VENUS in order to
make CHEOPS working.
I did my ghost from win 98 startup disk.
Today, i remove the ghost file.
NOW, i can't
I would like to introduce you to an exciting "WEALTH
BUILDING PROGRAM" that is more profitable than any
multilevel, direct sales, franchise, or any investment opportunity in
existence !
How Would You Like To:
1. Drastically reduce personal, business and capital gains taxes?
2. Protect all
Remove
-Original Message-
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, January 31, 2000 10:10 AM
Subject: [Cooker] linuxconf
I installed quite well Mandrake7 yesterday. I tried t make a ghost on my
vfat partition where Windoz is installed.
Besides,
Get an error when trying to compile the mod (using the one from
http://hpwww.ec-lyon.fr/~vincent/apache/mod_put.html )
(btw: is there a way to put the following into a script file once i get it
working?)
Roger
[EMAIL PROTECTED]
Here's is what i get when trying to compile:
[root@xxx apache]#
Kaixo!
A spanish user told me that when trying to install MDK 7.0 booting from CD
he had:
In second stage install
-X11TransSocketUnixConnect : Can't connect : errno = 111
-X11TransSocketUnixConnect : Can't connect : errno = 111
Fri Jan 28 13:09:17 2000 Gtk-Warning ** : cannot open
Sorry but removing does'nt work. I install again.
It seems that the Venus libraries glib10 and gtk10 may cause some troubles
in Air.
Min \"Richard\" Chung a écrit :
Remove
-Original Message-
From: root [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, January
granted...the install partitioner doesn't work well at all with any preexisting
windows partitions.
have been advised by powerquest that once you use a partitioner, don't switch
to others as it may cause other problems.
you'll need to go back into the mdk install prg and del the partitions that
Hi,
At this moment, you can only select one of the pre-configured
crypto-RPM servers. It would be nice if I could enter the IP Adress / download
location for my own servers.
Just yesterday, I installed 7.0 on my desktop machine. which is
incidentally my network access
even when dropping down to the 15bpps as he stated?
wierd... thank gosh i'm sticking w/ the mdk setup then. glad to see they
(nvidia) finally released some drivers. quite enjoying the screensavers tho
(lol).
On Mon, 31 Jan 2000, you wrote:
Roger wrote:
thought it had to be xfree 3.3.5
Already reported that proble twice... got no answer.
From: Pablo Saratxaga [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] [[EMAIL PROTECTED]: Instalacion de MDK 7]
Date: Mon, 31 Jan 2000 20:00:11 +0100
Kaixo!
A spanish user told me that when trying to
Roger [EMAIL PROTECTED] writes:
Have a tyan tiger 1832 dl motherboard w/ apm support.
First of all, it's not enabled in the kernel (more than likely will have to
recompile it myself, but my sblive works now...lol...so no need or hurry to do
so!)
Yes it is. But some motherboards have a
On Mon, Jan 31, 2000 at 08:38:10PM +0100, Hakan Tandogan wrote:
At this moment, you can only select one of the pre-configured
crypto-RPM servers. It would be nice if I could enter the IP Adress /
download location for my own servers.
Yes, that would be nice for me too.
I've downloaded
And I'll raise you:
Abit BP6, 2 Celeron 366s at 552Mhz, 128 Meg PC100,
2 WD 27 gig Udma 66 7200RPM drives, (With DMA properly turned on)
Sound Blaster 64, 3com 905b-tx, 3 16meg G200, Xfree 3.9.17 +xinerama,
3 19inch CTX monitors.
Oh yeah, Mandrake 7.0. G.
--
Don Krause
I've forwarded this email with the relevant header to
[EMAIL PROTECTED], hopefully they will actually take some action. If
you still have it, do the same, it may help.
Gawd, I hate spam.
John
Don Krause wrote:
And I'll raise you:
Abit BP6, 2 Celeron 366s at 552Mhz, 128 Meg PC100,
2 WD 27 gig Udma 66 7200RPM drives, (With DMA properly turned on)
Sound Blaster 64, 3com 905b-tx, 3 16meg G200, Xfree 3.9.17 +xinerama,
3 19inch CTX monitors.
Oh yeah, Mandrake 7.0. G.
--
Don
thanx..
if it actually costed something to send spam, no body would be doing it!
On Mon, 31 Jan 2000, you wrote:
I've forwarded this email with the relevant header to
[EMAIL PROTECTED], hopefully they will actually take some action. If
you still have it, do the same, it may help.
Gawd, I
the card is recognized fine!
This idea didn't work for me.
Here's what happened
I went to install MDK7.0 on an 8 GB disk with WIN98 on it.
Told partitioner to give 2 GB to Linux (leaving 6GB for Windows)
After it all went horribly wrong and I ended up with a corrupt Windows that
wouldn't boot, I started from scratch.
I
Quoting Nora Etukudo [EMAIL PROTECTED]:
On Mon, Jan 31, 2000 at 08:38:10PM +0100, Hakan Tandogan wrote:
At this moment, you can only select one of the pre-configured
crypto-RPM servers. It would be nice if I could enter the IP Adress /
download location for my own servers.
Yes,
from the quill of John Cavan [EMAIL PROTECTED] on scroll
[EMAIL PROTECTED]
I've forwarded this email with the relevant header to
[EMAIL PROTECTED], hopefully they will actually take some action.
If
you still have it, do the same, it may help.
Gawd, I hate spam.
Yes, so do I. So much so
from the quill of DindinX [EMAIL PROTECTED] on scroll
[EMAIL PROTECTED]
- Added the doc/ subdirectory in /usr/doc/vim-common-5.6/doc
- Correctly install vimrc_hebrew
Cool. How about fixing ctags now? The ctags package in both Air and
Cooker does not work with vim, but the ctags that is
from the quill of [EMAIL PROTECTED] on scroll 21536bdf$6dbf$[EMAIL PROTECTED]>
Hi,
· I just want you to take a quick look at this PHENOMENAL, One of
a kind, 100% legal - PRIVATE OFFSHORE Wealth Building Program.
· It's a PRIVATE BY-INVITATION-ONLY CLUB, where many of us
are easily
For a few days, when i upgrade (urpmi.update -a) I had a lot of these messages :
Eterm-O.8.10-4mdk requires libICE.so.6 but no package provide it
Eterm-O.8.10-4mdk requires libSM.so.6 but no package provide it
Eterm-O.8.10-4mdk requires libX11.so.6 but no package provide it
Eterm-O.8.10-4mdk
Someone requested RPMs for sawmill a while back... not sure if anyone else
took it upon themself to build RPMs for it, but I did. You'll need
sawmill, librep, and rep-gtk in order for sawmill to work. I've uploaded
the source RPMs to contrib, but if someone doesn't want to rebuild,
they're
Hi,
Depending on the version, these libraries are in:
XFree86-libs-3.3.6-7mdk.i586.rpm (most likely the one you need),
compat-libs-5.3-4mdk.i586.rpm,
libc-5.3.12-32mdk.i586.rpm
Hope it'll solve your pb,
---
kk1
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Mon, 31 Jan 2000, Ron Stodden wrote:
There are new floppy images in the updates/7.0 directory of the mirrors.
Included is README.img, which I include inline below. Note particularly
(and with great joy and relief) the final paragraph (big G).
snip, Final Paragraph:
first off...as i said, resizing windows or "adding partitions" was a no-no".
did that and when booting back to dos and using pqmagic stated, "partition
errorpartition wasn't visible or no partitions to show". to resolve, had
to go back a delete the swap partition that i added.
tell ya one
did an rsync off of rpmfind.net..thought i trashed the o/s
had allot of weird stuff happeningstuff that i remember seeing on this
compaq presario when i first started off...maybe even worse.
after a couple of reboots, my eye feel on the headers.sweat number eh?
getting
please note, (so used to doing this i forgot to note)
the "/wavs" file ends up in the /usr directory on all .tar.gz's and rpm's
don't know why. if i'm not mistakened, the "/wavs" should end up in teh
/home/users/.licq/wavs
so usually i just copy this dir from the /usr default location to the
In attempting to install the perl5 GD module from CPAN, the make failed
trying to find libttf. After a little looking around, I realized that
I needed to create an extra symlink from libttf.so.2 to libttf.so.
After making the change, everything worked fine.
Just thought I'd post here, so that
You make it sound as though I was dealing with beta software. I was
commenting on the inadequacy of a released product (
http://www.linux-mandrake.com/en/announce-air.php3 ) to deal correctly with
my data (I got it 3 days after it was released), when there was no mention
anywhere of any
Roger wrote:
Get an error when trying to compile the mod (using the one from
http://hpwww.ec-lyon.fr/~vincent/apache/mod_put.html )
It looks like you are missing the glibc-devel package. For 7.0, get
ftp://ftp.rpmfind.net/linux/Mandrake/7.0/Mandrake/RPMS/glibc-devel-2.1.2-9mdk.i586.rpm
it took me about 2 - 3 days from knowing little on local lans to set up my
small local lan using ip aliasing to to different ip's that i obtain thru cox
@home cable modem service.
I found little howto's on the process but pieced together what i could to get
the 2 working. probabely really
Hi,
· I just want you to take a quick look at this PHENOMENAL, One of
a kind, 100% legal - PRIVATE OFFSHORE Wealth Building Program.
· It's a PRIVATE BY-INVITATION-ONLY CLUB, where many of us
are easily earning $500 to $3,500 per DAY!
· We get paid BY-THE-MINUTE direct to our own Private
50 matches
Mail list logo
