PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 30, 2000 9:02 PM
Subject: Re: [Cooker] Air Keeps crashing - Me too!!!
I also have an AMD K6-2-450 (FIC PA2013 motherboard)
132MB ram
Diamond "Monster Fusion" video
(But it works flawlessly on other computers here...)
Esko
I have no problems with same motherboard with a K6-2-400. (different video
configuration) It is still acting flacky. (I'm not sure if the
distributed.net client is conflicting with something or if it is the setup
itself. If I don't run the dnetc utility then it will run for more than a day
im having a problem with mandrake 7 after run it for a few weeks then
shutdown it wont start back up
it goes through all the startup checks alright but cant load X the screen
just flickers the error is cant find default font fixed
when i run Xconfigurator i setup all the graphics specs then go
I also have an AMD K6-2-450 (FIC PA2013 motherboard)
132MB ram
Diamond "Monster Fusion" video
(But it works flawlessly on other computers here...)
Esko
On Sun, 30 Jan 2000, you wrote:
im having a problem with mandrake 7 after run it for a few weeks then
shutdown it wont start back up
it
I reinstalled i couldnt workout what was causing it
where both runing the same chip and simular video and same ram ?
when it crashes next i will spend more time investigating
On Mon, 31 Jan 2000, you wrote:
I also have an AMD K6-2-450 (FIC PA2013 motherboard)
132MB ram
Diamond
Axalon Bloodstone wrote:
Yupp, (actualy i was harassing Michael ;)
once again i've been caught reading email too fast..
7.0b didn't have this problem but when I run setup then sound services
it detects my sound card as a Yamaha OPL3 SAX2. I then hear like one
second of Linus then it
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Air ISO boot problems.
Kaixo!
On Mon, Jan 24, 2000 at 09:45:59PM -0700, Axalon Bloodstone wrote:
sounds like somebunny forgot to use binary mode to transfer, the cdr i
Indeed windows by default uses text mode; that sucks.
burned with Easycd boots all
Sam Walker [EMAIL PROTECTED] writes:
Try to read the cd in a file manager. If it says air.iso is a file on the CD
and that's all you see, you didn't set things up properly before starting.
you can mount it under linux via -o loop, but it's a nono for install :ppp
befre
second sstage install
-Original Message-
From: Pablo Saratxaga [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 25, 2000 12:21 AM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Air ISO boot problems.
Kaixo!
On Mon, Jan 24, 2000 at 09:45:59PM -0700, Axalon Bloodstone wrote
Alexandre Dussart wrote:
Keith Conger [EMAIL PROTECTED] writes:
It detects as Yamaha X Wave or something. but RH setup detects correctly.
But in both cases I get I get linus only saying "Hi" then it cuts off. Here
is what my conf.modules says:
alias midi opl3
options opl3 io=0x388
not sure as windows 2000 won't even use my cd burner but I have burned
at least 4 cd's that I can remember using mandrake 7.0 to burn them and
they all worked great. With these few problems
1) they won't work with the kenwood true speed cdroms
2) they also won't work on at least some older
See comments below
On Tue, 25 Jan 2000, you wrote:
not sure as windows 2000 won't even use my cd burner but I have burned
at least 4 cd's that I can remember using mandrake 7.0 to burn them and
they all worked great. With these few problems
1) they won't work with the kenwood true speed
If you made this mitake, you can moint the CD, but you will still see
only one file on the CD, air.iso (or Mandrake70.iso, depending on
which site you got it from)
Sam Walker [EMAIL PROTECTED] writes:
Try to read the cd in a file manager. If it says air.iso is a
file on the CD
and
: Tuesday, January 25, 2000 12:21 AM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] Air ISO boot problems.
Kaixo!
On Mon, Jan 24, 2000 at 09:45:59PM -0700, Axalon Bloodstone wrote:
sounds like somebunny forgot to use binary mode to transfer, the cdr i
Indeed windows by default uses
the graphical install misses the variant "de-latin-nodeadkeys", so I had
Yes, I purposedly do it; I thought nobody used it and was only a relief of
the very old times when Linux was unable to properly handle 8bits and
dead keys.
Do you think it is worth adding it ? (I mean, all the
the graphical install misses the variant "de-latin-nodeadkeys", so
Yes, I purposedly do it; I thought nobody used it and was only a relief
of the very old times when Linux was unable to properly handle 8bits
and dead keys.
No, this has nothing to do with it, and if so, it would be the
I have seen comments about some small bugs and omissions in Air. Will there
be regular updates posted or should we look to cooker for now for fixes (for
example freetype)?
Hoyt
"Hoyt" [EMAIL PROTECTED] writes:
I have seen comments about some small bugs and omissions in Air. Will there
as for the install problems,
a page has been created www.mandrake.com/en/airlast.php3
Kaixo!
On Mon, Jan 24, 2000 at 12:15:44PM +0100, Kai Nielsen wrote:
the graphical install misses the variant "de-latin-nodeadkeys", so
Yes, I purposedly do it; I thought nobody used it and was only a relief
of the very old times when Linux was unable to properly handle 8bits
and dead
On Mon, 24 Jan 2000, Michael Doyle wrote:
On Mon, 24 Jan 2000, you wrote:
Michael Doyle wrote:
G'day
Try this, open the 'puter case, take out the Sound Card, power up, set no PNP
in the BIOS setup, and manual IRQs, let the 'puter boot, shutdown, add sound
card, power up,
Axalon Bloodstone [EMAIL PROTECTED] writes:
If you type below those damn lines pine cuts them off cause it thinks this
is a sig :/
same for gnus.
--Chmouel
On Sun, 23 Jan 2000, Stacey Brewer wrote:
Using stock installation, my audio is found and setup. Event audio works
well, but playing MP3 audio
using any of the installed mp3 players has some trouble. As long as I don't
modify the volume from the player or from the mixer, it plays fine. If I
Sorry. Does this work better? I've got a Yamaha OPL3 SAx2.
Lyndon Lininger Sr
Axalon Bloodstone wrote:
On Mon, 24 Jan 2000, Michael Doyle wrote:
On Mon, 24 Jan 2000, you wrote:
Michael Doyle wrote:
G'day
Try this, open the 'puter case, take out the Sound Card, power
PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 24, 2000 12:34 PM
Subject: Re: [Cooker] Air 7.0 - Sound on Dell Inspiron 7000
On Sun, 23 Jan 2000, Stacey Brewer wrote:
Using stock installation, my audio is found and setup. Event audio works
well, but playing MP3 audio
using any of the
Axalon Bloodstone wrote:
On Mon, 24 Jan 2000, Michael Doyle wrote:
On Mon, 24 Jan 2000, you wrote:
Michael Doyle wrote:
G'day
Try this, open the 'puter case, take out the Sound Card, power up, set no PNP
in the BIOS setup, and manual IRQs, let the 'puter boot,
On Mon, 24 Jan 2000, Hoyt wrote:
I have seen comments about some small bugs and omissions in Air. Will there
be regular updates posted or should we look to cooker for now for fixes (for
example freetype)?
Hoyt
Theres nothing wrong with freetype. But yes we release updates just like
Yupp, (actualy i was harassing Michael ;)
once again i've been caught reading email too fast..
7.0b didn't have this problem but when I run setup then sound services
it detects my sound card as a Yamaha OPL3 SAX2. I then hear like one
second of Linus then it plays the midi w/o a problem.
Thank you for your help. It was detected as a yamaha xwave
direct 128 by lothar. But I remedied the problem for now. A
friend gave me a sound blaster 16 card and I put it in and
setit up with sndconfig no problem. Now my sound works
perfectly. Again thank you for your assistance. I've have
To anyone interested,
I have recently discovered the answer to a problem I have seen on
this list wuite a bit. People have been having problems with the Mandrake
7.0 ISO not booting properly, and through experimentation I have
discovered a possible answer. I assembled a collection of
On Mon, 24 Jan 2000, Deven Phillips wrote:
To anyone interested,
I have recently discovered the answer to a problem I have seen on
this list wuite a bit. People have been having problems with the Mandrake
7.0 ISO not booting properly, and through experimentation I have
discovered a
To: [EMAIL PROTECTED]
Sent: Monday, January 24, 2000 9:37 PM
Subject: [Cooker] Air ISO boot problems.
To anyone interested,
I have recently discovered the answer to a problem I have seen on
this list wuite a bit. People have been having problems with the Mandrake
7.0 ISO not booting properly, a
Kaixo!
On Mon, Jan 24, 2000 at 09:45:59PM -0700, Axalon Bloodstone wrote:
sounds like somebunny forgot to use binary mode to transfer, the cdr i
Indeed windows by default uses text mode; that sucks.
burned with Easycd boots all the machines i have :/ I wouldn;t expect it
to even boot the
Jürgen Zimmermann [EMAIL PROTECTED] writes:
if I change the netmask during the install to "255.255.255.0", it seems
as if it's not updated in the system
i have just tested, and it worked correctly as far as i have tested...
7.0b didn't have this problem but when I run setup then sound services
it detects my sound card as a Yamaha OPL3 SAX2. I then hear like one
second of Linus then it plays the midi w/o a problem. Now When Ever I
play any sound it skips. I then try Lothar and it detects the wrong
yamaha card.
I have the same problem. If you figure it out please let me know how you
resolve it. Thank you.
Lyndon Lininger Sr
- Original Message -
From: "Keith Conger" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 23, 2000 9:30 PM
Subject: [Cooker] Air and Sound Proble
it out please let me know how you
resolve it. Thank you.
Lyndon Lininger Sr
- Original Message -
From: "Keith Conger" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 23, 2000 9:30 PM
Subject: [Cooker] Air and Sound Problems
7.0b didn't have this problem but
Using stock installation, my audio is found and setup. Event audio works
well, but playing MP3 audio
using any of the installed mp3 players has some trouble. As long as I don't
modify the volume from the player or from the mixer, it plays fine. If I
adjust the audio levels, then the system
the same problem. If you figure it out please let me know how you
resolve it. Thank you.
Lyndon Lininger Sr
- Original Message -
From: "Keith Conger" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 23, 2000 9:30 PM
Subject: [Cooker] Air and Sound Problems
Kaixo!
On Fri, Jan 21, 2000 at 05:28:57PM +0100, Jürgen Zimmermann wrote:
the graphical install misses the variant "de-latin-nodeadkeys", so I had
Yes, I purposedly do it; I thought nobody used it and was only a relief of
the very old times when Linux was unable to properly handle 8bits and
Quel Qun writes (a long time ago, I read this list once a month or so):
QQ Mandrake 7.0 (Air) CDRom still fails to start on my Dell133 w/S3 Trio. It
QQ should use the S3 server but never does. Here is what detect found on this
QQ machine:
Incidentally, I had an S3 Trio card until a month or
Hi,
the graphical install misses the variant "de-latin-nodeadkeys", so I had
to
modify the file /etc/sysconfig/keyboard after the installation.
So long,
Juergen
Jürgen ZimmermannDepartment of
Hi,
if I change the netmask during the install to "255.255.255.0", it seems
as if it's not updated in the system. When I `reconfigure' the network,
a "255.255.0.0" shows up...
Again, after a sucessfull installation (with netmask "255.255.255.0" in
the
graphical installer), DNS did not work for
"Craig Foster" [EMAIL PROTECTED] writes:
Don't forget that Windows won't display .DLL (or most system files for that
matter) in Explorer. If you copied the rawritewin.exe off the CD, the .DLL
porbably hasn't been copied too.
alas it seems there's no dll's in dosutils... don't remember who
Hi,
I did a clean install from the ISO image (burned on CD).
After I found that kdebase was not installed, a
# rpm -ivh kdebase-1.1.2-30mdk.i586.rpm
gave the following error:
file /usr/share/mimelnk/audio/x-mp3.kdelnk from install of
kdebase-1.1.2-30mdk conflicts with file from package
Title: AIR - ISO not bootable?
This may be a dumb question, but isn't the ISO supposed to be bootable? I can't get the CD to boot OR rawwritewin to work for a bootable floppy...I get an error saying the a library failed to load...anyone else with similar difficulties? Could my ISO have been
Brad Boutwell [EMAIL PROTECTED] writes:
This may be a dumb question, but isn't the ISO supposed to be bootable?
it is
Title: RE: [Cooker] AIR - ISO not bootable?
After my initial question, I thought the readers of this list were above such replies...I suppose I should have worded my question differently:
My newly downloaded ISO does NOT boot. Could my ISO have been damaged during download (and still burn
Title: RE: [Cooker] AIR - ISO not bootable?
I just realized that I may have taken that reply WAY out of context and shot myself in the foot all at once...irony is so weird )
My apologies Pixel...I evidently am rounding out the people I was stereotyping :)
Brad
Brad Boutwell [EMAIL PROTECTED] writes:
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--_=_NextPart_001_01BF6112.A1AB6B24
Content-Type: text/plain;
charset="iso-8859-1"
After my initial
Brad Boutwell wrote:
This may be a dumb question, but isn't the ISO supposed to be
bootable? I can't get the CD to boot OR rawwritewin to work for a
bootable floppy...I get an error saying the a library failed to
load...anyone else with similar difficulties? Could my ISO have been
foul of that setting sheepish grin
Craig Foster
- Original Message -
From: David Walluck [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 18, 2000 4:57 AM
Subject: Re: [Cooker] AIR - ISO not bootable?
Reinaldo Silveira-local wrote:
My rawwritewin gave the same "li
3cow now wrote:
Hello
I dloaded the AIR release again, and burned another cd-image. It got to the
point where it says "Mounting 2nd Ramdrive..."
Then it sits there for a long time, and then goes back to "Initializing
CD-ROM".. Has anyone else been having problems with the new 7.0 AIR
[EMAIL PROTECTED] wrote:
Did anyone notice Linuxconf had some problems within the network
portion within Oxygen?
The error I had was real subtle: The network portion was not
configured correctly. I resolved the error, but this error occured
after I upgraded to Oxygen.
Did anyone notice
Sergio Korlowsky [EMAIL PROTECTED] writes:
I have another problem thou, I choose supermount at instalation
and it just doesn't work
check the kernel you are using is kernel and not kernel-linus (or kernel-secure)
this does not matter, as I had gotten into the graphical
install stage on a beta test, and then after I updated to final this problem
surfaced. anyone else see this.
Original Message Follows
From: "Louie Walker" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sub
Pixel wrote:
Sergio Korlowsky [EMAIL PROTECTED] writes:
I have another problem thou, I choose supermount at instalation
and it just doesn't work
check the kernel you are using is kernel and not kernel-linus (or kernel-secure)
but I installed linux-secure for a server.
using expert mode.
will someone please state if there is a problem, if so, could
a difference file (xdelta?? ) be put up as well as a new iso
for those people patiently downloading ?
srp
Pixel [EMAIL PROTECTED] writes:
Sergio Korlowsky [EMAIL PROTECTED] writes:
but I installed linux-secure for a server.
using expert mode.
hum, well, seems like the disabling supermount for security 4 did not make its
way :-(
You shouldn't use supermount if it is for a server :)
--
Well after my 4th attempt at dnloading the AIR ISO, I manage to get one that
works!
I complete the install, and everything looks good, execpt for the HTTP
failing when booting up...
But I get into X-Windows (GNOME), and I try to start netscape.. NOTHING.
Then I open a shell, and try to run
Is the newest iso
the final of 7.0???
just wondering
from the way that it sounds and the shipping to stores in Feb
i assume it is the final
[EMAIL PROTECTED] wrote:
Pixel [EMAIL PROTECTED] writes:
hum, well, seems like the disabling supermount for security 4 did not make its
way :-(
You shouldn't use supermount if it is for a server :)
--
-- Yoann http://www.security-addict.org
It is well known that
.
[FAILED]
Hope it helps,
---
kk1
From: "3cow now" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Cooker] AIR Iso is okay, but netscape problems.
Date: Sun, 16 Jan 2000 16:37:33 PST
Well after my 4th attempt at dnloadi
Hello
I dloaded the AIR release again, and burned another cd-image. It got to the
point where it says "Mounting 2nd Ramdrive..."
Then it sits there for a long time, and then goes back to "Initializing
CD-ROM".. Has anyone else been having problems with the new 7.0 AIR release?
- Gene
I am downloading the mandrake70.iso. it is in the mandrake ISO directory ...
NOT the mandrake beta directory. It has the latest date.
I downloaded the AIR release and burned a cd image, I start the install and
I get "initializing CD-ROM , mount failed - invalid argument, Error mounting
Ram disk, This error should not be happening, shutting down and rebooting
the system." This is the stangest set of messages I have ever seen.
Mandrake 7.0 (Air) CDRom still fails to start on my Dell133 w/S3 Trio. It
should use the S3 server but never does. Here is what detect found on this
machine:
#0.9.29
CPU: GenuineIntel: Pentium 75 - 200:132:FPU:NO MMX:NO3DNOW
MEMORY:30644:660:16968:164:6188:58040:64476
"Quel Qun" [EMAIL PROTECTED] writes:
Mandrake 7.0 (Air) CDRom still fails to start on my Dell133 w/S3 Trio. It
should use the S3 server but never does
strange VGA16 server does not work...
67 matches
Mail list logo
