my crontabs wont run ...?
i login as root, type crontab -e and they come up, but they dont run ... am
i doing something wrong? or is there another way of doing cronjobs on debian
1.1 ?
thanks
Im out like bellbottom trousers,
michael
///\ Wake up Muttley, your dreamin` again
c-00
I was wondering the other day about alternate installation
methods, that is alternate to the standard interactive process.
Does Debian support any automated installation processes? I.e.
give dpkg a list of packages and it will install the current
versions.
One nice application would be a
On Thu, 19 Dec 1996, Wayde Allen wrote:
On Thu, 19 Dec 1996, David Puryear wrote:
[snip]
[snip]
Transmit and recieve are the main pins that are important.
2 and 3 are Transmit and receive. Switch those two, and run your ground
straight through.
Only need 3 wires going through the line
Does anybody know how to prevent a banner page from being
printed? I'm printing to an HP4M and after each print job a
banner page gets printed (it looks like the contents of the cf
file). There used to be a no banner switch for printcap, but I
didn't see one in the Linux man page. Any ideas?
On Thu, 19 Dec 1996, Simon Martin wrote:
Make sure you are using /dev/ttyS?
--
Daniel Stringfield
mailto:[EMAIL PROTECTED] http://www.jax-inter.net/users/servo
Send email for more information on the Jacksonville Linux Users Group!
--
TO UNSUBSCRIBE
---BeginMessage---
The man package that Debian uses doesn't need the makewhatis command.
Debian 1.1.xx had a bug in apropos, that is fixed in Debian 1.2
You should upgrade, but I fear that this upgrade will affect a lot of
programs, not only apropos ...
I don't know anything about the other
On Thu, 19 Dec 1996, David Puryear wrote:
Hi All,
I'm trying to connect two computer with serial cable but I couldn't find
the cable long enough. So I went to electronic store and bought cable
without plugs and plugs. I ask them which wire went where, but they had
no idea.:( I think I
Hi,
After upgrading to Debian-1.2 (it went very smooth, thanks) i tried to
build a new kernel. I installed the kernel-source-2.0.27.deb from devel
directory and then I did:
make menuconfig
make-kpkg kernel_image
There was no problem with compilation, but at the end I got:
cp
On Fri, 20 Dec 1996, Richard G. Roberto wrote:
Does anybody know how to prevent a banner page from being
printed?
Try inserting ':sh:' in you /etc/printcap. This entry means 'suppress
header'
Yours,
-- martin
// Martin Konold, Muenzgasse 7, 72070 Tuebingen, Germany //
// Email: [EMAIL
Precedence: list
Priority: urgent
Importance: low
System: 486,
scsi: apt2840, external 4G and 700M disks.
cdrom: eide
The debian kernel 2.027 crashes on the aic7xxx controller.
I have no problems booting from none debian kernels.
Please help. I have tried noreset wich doesn't help.
-Tim.
I would like to be able to install Debian over my Rehdat 3.03 without
losing data files (all my faqs, msgs from the net, and so on)
Is this possible? Please point me in the right direction of what to read.
Thanks.
Best Regards,
Joe HartmannTel: (603) 863 6073
K2AJV
I've been working with a fresh instalation of 1.2 including a
reconfigured kernel 2.0.27. I'm getting lots of messages like
the following in /var/adm/messages:
Dec 19 22:37:19 blackbird last message repeated 569167 times
Dec 19 22:38:19 blackbird last message repeated 577432 times
On Fri, 20 Dec 1996, Martin Konold wrote:
On Fri, 20 Dec 1996, Richard G. Roberto wrote:
Does anybody know how to prevent a banner page from being
printed?
Try inserting ':sh:' in you /etc/printcap. This entry means 'suppress
header'
Thanks to everyone who replied. I had the burst
On Thu, 19 Dec 1996, Carl Greco wrote:
I have set up a couple of Linux based e-mail servers with uucp. The
main advantages of uucp are low cost and local control of e-mail
accounts.
Exactly the reason why I like it.
The latest system (a 386SX-16MHz 4MB PC) uses Debian 1.1
with smail and
Suject: Can not boot debian kernel 2.0.27
System: 486,
scsi: apt2840, external 4G and 700M disks.
cdrom: eide
The debian kernel 2.027 crashes on the aic7xxx controller.
I have no problems booting from none debian kernels.
Please help. I have tried noreset wich doesn't help.
-Tim.
--
TO
David Lutz writes:
I am upgrading my mostly Debian 1.1 system to Debian 1.2. According
to symlinks I have these dangling links:
dangling: /usr/lib/libbfd.so.2.7.0.3 - libbfd.so.2.7.0.3.dpkg-tmp
dangling: /usr/lib/libopcodes.so.2.7.0.3 - libopcodes.so.2.7.0.3.dpkg-tmp
This is a hold over
Hi,
Been trying to get sendmail 8.8.3 on a debian 1.1 (off the infomagic cd)
box running. It seems to work yet when I try and makemap our mailertable
file it gives me an error, with this line in the sendmail.cf:
Kmailertable hash /etc/mailertable
phoenix(larry)# makemap hash mailertable.db
From [EMAIL PROTECTED] Wed Dec 18 22:25:06 1996
On Wed, 18 Dec 1996, David Lutz wrote:
of Debian Packages. I would like to know how I can fix the problem
however. Dselect swears that the binutils package is up-to-date and
refuses to attempt to reload it. Does anybody have any
I got a private mail from David Puryear [EMAIL PROTECTED], but a
reply bounced with:
: Return-Path: MAILER-DAEMON
: Subject: Delivery failure
: From: [EMAIL PROTECTED]
: Date: Fri, 20 Dec 1996 01:01:39 -0700
: To: [EMAIL PROTECTED]
: Cc: [EMAIL PROTECTED]
:
: Your
I'm not exactly an X guru, but hopefully this'll help a little bit:
On Thu, 19 Dec 1996, Kevin McEnhill wrote:
I wrote to this list last week about the fact that I can't get Xwindows to
run after upgrading to 1.2.
[deletions]
Here is a portion on the error message I get.
Begin Paste
I need help on installing this ethernet card, as the drivers don't seem to
be included.
Thanx
Miro
I have 4 NE200 ethernet cards, one is a RL8029, but I don't
remember, which one.
Maybe the PCI card ? for this, I use io=0xFF80 and irq=12
for each other ISA card, I use the DOS program
ok.. i am trying to set up sendmail.. now it partialy works.. the local
sendmail works when i am not online but when i ma online the outgoing
sendmail works but the incoming doesn't... now what is wierd is it bounces
but i still kind of get the mail on the recieving end.. and i do kill the
On Thu, 19 Dec 1996, Fabien Ninoles wrote:
-+-BEGIN PGP SIGNED MESSAGE-
-+
-+On Thu, 19 Dec 1996, Vithar wrote:
-+
-+
-+ Okay, I realize that this is not neccessarily a Debian problem, but
-+ since I am using Debian, I figured I'd ask this here anyway. g
-+
-+ Is there any way,
You should check the home page of Java-Linux porting project at
http://www.blackdown.org/java-linux.html. Among other things they have set up
a couple of mailing lists and people there can probably answer better to Java
specific questions.
// Heikki
--
TO UNSUBSCRIBE FROM THIS MAILING LIST:
Hi all,
Only me. I have now got a limping X11 installation. A few
questions/observations:
1) I installed xserver_svga from Debian-1.2. When I run xbase-configure it
complains at the end of the installation that there is no XF86_S3 (I have
a Dell Dimension P130 with an S3 Trio 64 display
On Fri, 20 Dec 1996, Matthew Stone wrote:
ok.. i am trying to set up sendmail.. now it partialy works.. the local
sendmail works when i am not online but when i ma online the outgoing
sendmail works but the incoming doesn't... now what is wierd is it bounces
but i still kind of get the mail
For some reason, my first message got lost. The spam nazi caught it
the first time, so I registered, got the confirmation back and resent
the message, but I never saw it. So if this is a dup, please excuse
me.
I'm installing a new 2.1 Gb drive in place of my 350 Mb. Current set up
is the first
I used to run magic filter on an older Debian system and it worked fine.
I installed 1.1 a few months back and re-installed the magicfilter
and now I have the stair-step problem. I have read the HOWTO and
it said to run a filter, and described one to fix that problem, but
with magicfilter
Fundamental [EMAIL PROTECTED] writes:
my crontabs wont run ...?
i login as root, type crontab -e and they come up, but they dont run
... am i doing something wrong? or is there another way of doing
cronjobs on debian 1.1 ?
thanks
I noticed this too. Cron was not running. Note that
On Fri, 20 Dec 1996, Richard G. Roberto wrote:
Thanks to everyone who replied. I had the burst page
suppressed with the :sh: boolean, and even tried the -h option to
the lpr command, but the boolean I was looking for isn't
implemented on linux. That doesn't matter because the problem is
at
Hi,
What are the default file permissions for /dev/cdrom and /dev/hdc
on Debian? I want ordinary users to be able to access the CDROM drive
but at the moment, /dev/cdrom is readable by everyone but linked to
/dev/hdc which can be read by the disk group. What is the debian way for
this?
Derek Lee
Has anyone else noticed that during the installation of apache ,if you
change the default directories for the document root and/or the
cgi-bin directory, this is not reflected in the srm.conf file. You
have to go into that file, and manually update those paths.
While I have your attention, how
-BEGIN PGP SIGNED MESSAGE-
On Fri, 20 Dec 1996, Angel Leyva wrote:
Has anyone else noticed that during the installation of apache ,if you
change the default directories for the document root and/or the
cgi-bin directory, this is not reflected in the srm.conf file. You
have to go into
If I can assume you don't really want your users to access the raw device,
I think you will find all is well. On my system, when I mount the
device (/dev/mcd) on /cdrom, everyone can read it. I also have the user
option in my /etc/fstab which lets anyone mount the cd. This may or
may not be
While I have your attention, how does one restart the server once
these changes are made?
/etc/init.d/apache reload
I did not know of this sophistication. I just do a kill -HUP apache's
PID
Regards,
E.-
--
Eloy A. Paris
Information Technology Department
Rockwell Automation de
Hi. My problems with lprm not working for ordinal users is caused by
another odd problem: suid isn't working for a few programs!
E. g. mmm is a wrapper of mine with a few combined actions for the
normal user. mmm calls just mount/umount/fsck/fdformat/mkfs and so
on, depending on argv[0].
On Thu, 19 Dec 1996, Pete Templin wrote:
- This is to make the office gag gift really work...-
I was given a VT100 terminal as a gag gift. Is there any way to
interface it with a Linux box? Keep it simple, so I can do it in one
night and really get some laughs around here.
I have done
I have 3 Intel machines running Debian 1.1. I have just upgraded
one of them to Debian 1.2. These are the minor problems I had
1) netstd and gcc required cpp, but did not tell me up front in dselect, but
at the time it tried to install. I fixed it with a manual dpkg -i
of cpp, then a
Thanks to all that answered to me: it was a problem in the configuration of the
Modeline lines. Now my X-configuration is OK.
Ciao!
Francesco Tapparo
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED]
Hi all,
I think, I have found a bug in X-Windows, but I'm writing it to debian-user,
because I'm not secure if it is a bug of XFree86 or of fvwm2, and the I do'nt
know
which mantainer email to.
This is the story:
Yesterday, I start X-Windows with startx; then start rxvt from a menu.
In rxvt I
On Thu, 19 Dec 1996, Vithar wrote:
Okay, I realize that this is not neccessarily a Debian problem, but
since I am using Debian, I figured I'd ask this here anyway. g
Is there any way, short of physically disabling it, of turning off the
annoying beep on the Linux console ? I get
-BEGIN PGP SIGNED MESSAGE-
On Fri, 20 Dec 1996, Eloy A. Paris wrote:
While I have your attention, how does one restart the server once
these changes are made?
/etc/init.d/apache reload
I did not know of this sophistication. I just do a kill -HUP apache's
PID
Well,
-BEGIN PGP SIGNED MESSAGE-
On Thu, 19 Dec 1996, Joseph L. Hartmann, Jr. wrote:
I would like to be able to install Debian over my Rehdat 3.03 without
losing data files (all my faqs, msgs from the net, and so on)
Is this possible? Please point me in the right direction of what to
On Thu, 19 Dec 1996, Joey Hess wrote:
Where can I find an untic program? untic is supposed to decompile
terminfo files.
Altavista found the following:
ftp.cis.ohio-state.edu/comp.sources.unix/Volume05/untic.Z
ftp.cis.ohio-state.edu/comp.sources.unix/Volume24/untic.Z
On Nov 20, [EMAIL PROTECTED] (Fundamental) wrote:
my crontabs wont run ...?
i login as root, type crontab -e and they come up, but they dont run ... am
i doing something wrong? or is there another way of doing cronjobs on debian
1.1 ?
Nope, I screwed up the postinstall when I converted to
Hi,
our debian linux box is behind a firewall operating socks4 protocol.
The dpkg-ftp package does not seem to use our rftp client, so we cannot
use dselect (ftp method).
Does anyone have a solution?
--
~
Stefan Sunaert
On Tue, 17 Dec 1996, Pete Templin wrote:
Now, an NFS mount request fails, like this:
# mkdir /nfs
# mount templinux:/nfs /nfs
mount: clntudp_create: RPC: Program not registered
Any idears?
I just had the same thing yesterday. The problem is that the nfs daemon
is not running.
Edit
On Thu, 19 Dec 1996, Joseph L. Hartmann, Jr. wrote:
I would like to be able to install Debian over my Rehdat 3.03 without
losing data files (all my faqs, msgs from the net, and so on)
Is this possible? Please point me in the right direction of what to read.
Your best bet is to put
On Dec 20, [EMAIL PROTECTED] (Vociferous Mole) wrote:
update-rc cron defaults
That should be
update-rc.d cron defaults
Sorry,
steve
--
The Mole - I think, therefore I scream
Not only is God dead, but just try to find
a
On Wed, 18 Dec 1996, Eduardo Diaz Comellas wrote:
BTW, is there any way to install debian
in a large group of computers without selecting the packages every time?
AFAIK, not directly.
An indirect workaround is to put the files in one directory (NFS mount,
maybe? Symlinks to the CD?) and just
On Thu, 19 Dec 1996, Wayde Allen wrote:
On Thu, 19 Dec 1996, Marty Leisner wrote:
I've done this a lot (I gave an article to the CUJ but they never published
it on this topic).
Could I get a copy ... ?
I'm fairly interested in this as well, since I do builds on Win16, Win32,
and many
I am trying to build octave 2.0 on my 1.1 system. I did not have the c++
libs (libg++), but if I get the new libg++, that depends on libc5.4, but I
have libc5.2. (I am assuming that my lack of the c++ libs is what is causing
the octave configure script to think my C++ compiler does not work
Ok, I'm stupid. I am trying to install v1.2 from a cdrom. When I boot the
kernel sees my sbpcd drive through the probing of that module. However no
device seems to be set up or mounted. I have tried to mount the /cdrom to
nearly every device in /dev but no luck.
What simple thing am I
It's a bug. Fix it with:
mknod /dev/scd0 b 11 0
Bruce
--
Bruce Perens K6BP [EMAIL PROTECTED]
Finger [EMAIL PROTECTED] for PGP public key.
PGP fingerprint = 88 6A 15 D0 65 D4 A3 A6 1F 89 6A 76 95 24 87 B3
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
Oops. That last fix was for SCSI CDs. The sound-blaster CD is created with
mknod /dev/sbpcd b 25 0
I am currently testing a new boot floppy set that I will release this
weekend. It fixes this, and a number of other bugs.
Thanks
Bruce
--
Bruce Perens K6BP
System: 486,
scsi: apt2840, external 4G and 700M disks.
cdrom: eide
The debian kernel 2.027 crashes on the aic7xxx controller.
I have no problems booting from none debian kernels.
What I need is some one to make a boot floppy without! the non eide
cdrom stuff. I have tested making kernel with
56 matches
Mail list logo
