> Mike - would you mind giving this a try? Download SlimCD from
> my site and run slimserver from this livecd (it won't touch
> nor hurt your existing installation).
I got quite excited by this. However, Slimserver does not seem able to read
my Maxtor One Touch drive even though it is recognised
Quoting Jim McCall <[EMAIL PROTECTED]>:
> Is there any advantage with Apple Lossless files using a SB2 vs. SB1?
>
well, if you can handle uncompressed over your wireless setup, or have it wired,
then SB1 will be less intense as far as CPU since it only uncompresses without
having to compress back
jazzfan Wrote:
> ...Am I correct that I can push select radio station IP addresses down
> to the Squeezebox2, turn off my PC, ultimatly building my own internet
> based FM tuner dial?...Thanks
Probably. Goto http://www.squeezenetwork.com/ first. And also make
sure you have the latest Slimserv
Graybatch Wrote:
> I'm no expert, but, having just done the same as you - i.e. purchase a
> new router - the way to reboot the SB2 is to press and hold the power
> button on the remote. You will go back to the original menus to define
> your network settings. It worked for me!
Thanks, but I knew
dip Wrote:
> Is there a possibility to create a playlist in slimserver for all songs
> except genre=classical? I have different genres for non classical music
> (rock, jazz, alternative...) but only one for classical. What I want is
> a playlist without classical songs so that I am able to play a
Quoting "max.spicer" <[EMAIL PROTECTED]>:
>
> Graybatch Wrote:
> > I'm no expert, but, having just done the same as you - i.e. purchase a
> > new router - the way to reboot the SB2 is to press and hold the power
> > button on the remote. You will go back to the original menus to define
> > your ne
A poll associated with this post was created, to vote and see the
results, please visit http://forums.slimdevices.com/showthread.php?t=14863
Question: W
A poll associated with this post was created, to vote and see the
results, please visit http://forums.slimdevices.com/showthread.php?t=14863
Question: W
kdf Wrote:
> unplug the power.
> press and hold 'add' while plugging back in. that does a factory
> reset.
> I'm not sure you would want to be doing that unless there was some dire
> problem.
What will that do? Will it just cause the SB2 to behave as it did when
I first took it out of the box?
For a long time now I've had problems with the web interface and
Firefox. It would repeatedly hang, being unable to load new pages.
I've now managed to track the cause of this problem down - I had
pipelining enabled in Firefox. I turned off pipelining
(network.http.pipelining), restarted Firefo
OK, so how do I turn off pipelining?
--
Patrick Dixon
www.at-view.co.uk
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
hi, is it possible to have the second line of the display where the
artist, title etc not to be bold?
cheers
Chris
--
chrisgeary
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
Enter the URL
about:config
Then search for "network.http.pipelining" and set to false.
--
jth
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
Ta
(padding)
--
Patrick Dixon
www.at-view.co.uk
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
max.spicer Wrote:
> What will that do? Will it just cause the SB2 to behave as it did when
> I first took it out of the box? Assumedly the settings that are held
> on the server will still be fine. If this is the case, then I can't
> see why I shouldn't try it.
It won't alter any server setti
From 6.0 onwards it has been possible to set the smoothness of scrolling text
on a graphics player, SBG or SB2
[player web page - display: set shorter Scroll Rate & and smaller Scroll Pixels]
As of 6.1, setting this to quite slow values including moving one pixel at a time should have minimal p
I also believe that native formats like FLAC on the SB2 allow for fast
forwarding and rewinding while non native formats that need trans
coding do not. That is a HUGE advantage to me.
On 7/2/05, kdf <[EMAIL PROTECTED]> wrote:
> Quoting Jim McCall <[EMAIL PROTECTED]>:
>
> > Is there any advantage
Unless you have the players synced. Then they will both get the lowest
common denominator. In this case it would be WAV.
On 7/1/05, radish <[EMAIL PROTECTED]> wrote:
>
> Each player has an order of preference for what stream format it wants,
> so the SB2 will try for flac before wav. You should h
Triode wrote:
1) How many users are using non default scroll settings?
Me! It makes the device look /a lot/ more professional!
2) How do the following scroll settings work for you:
Pixels = 1, Rate = 0.01
Pixels = 1, Rate = 0.02
Pixels = 2, Rate = 0.04
Pixels = 4, Rate = 0.08
Patrick Dixon Wrote:
> OK, so how do I turn off pipelining?
It's worth noting that pipelining is disabled by default in Firefox and
Mozilla as it can cause problems with some web servers. As it's a
hidden pref in Firefox, it won't be on unless you deliberately turned
it on. SlimServer is the fi
Should these be for both single and double line scrolling? I've never
been sure whether to just set both values to the same thing. I don't
think I've ever used double line scrolling anyway - my eyes are just
about good enough to read the single line from my sofa. :-)
Max
Triode Wrote:
> >Fro
Should these be for both single and double line scrolling? I've never
been sure whether to just set both values to the same thing. I don't
think I've ever used double line scrolling anyway - my eyes are just
about good enough to read the single line from my sofa. :-)
Max
I normally set the
I got quite excited by this. However, Slimserver does not seem able to
read my Maxtor One Touch drive even though it is recognised as sda1 and
I appear to be able to mount it.
And you have to mount it manually, this is not done automatically.
mount /dev/sda1 /mnt/sda1
should do the job.
--
hi, is it possible to have the second line of the display where the
artist, title etc not to be bold?
Press the "size" button on the remote.
--
Michael
---
Help translate SlimServer by using the
StringEditor Plugin (http://www.herger.net
I use the RSS screensaver when my SB2 is in standby mode, but I tend to
leave the brightness level at 0. This lets me quickly call up the
headlines by pressing brightness, but means I don't have the display
scrolling constantly when the device is "off". I've got my wireless
router in a visible l
Can anyone suggest what I might be doing wrong?
Hey, you're giving the answer yourself:
On thing, I'm not too sure of the syntax to reference drives using
Unix. I have tried many variations to get Slimserver to index my
files... should sda1:\LosslessMusic likely to work?
Nope, this is wher
The size button will make it smaller, but it won't make it a lighter
font. Are any alternate fonts available for the SB2?
--
mkozlows
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
Yes at present the display data continues to be sent to the player even if brightness is 0 - its simply that the player doesn't
display it.
Perhaps you could raise a bug to record it as an enhancement request (though I am not sure of the simplet way of dealing with it at
present.)
Adrian
I
Hopefully this isn't an FAQ - if it is please point me in the right
direction :)
I'm in the process of combining my music collection (FLAC/Vorbis) with
my girlfriend's (m4a, in iTunes) so we can play from both on the SBs
around the house. So my simple question is - if I make the iTunes
library av
Quoting radish <[EMAIL PROTECTED]>:
>
> Hopefully this isn't an FAQ - if it is please point me in the right
> direction :)
>
> I'm in the process of combining my music collection (FLAC/Vorbis) with
> my girlfriend's (m4a, in iTunes) so we can play from both on the SBs
> around the house. So my sim
Trido,
I also use no-default values of pixel=1, rate .07, same for both
On 7/2/05, Triode <[EMAIL PROTECTED]> wrote:
> >
> > Should these be for both single and double line scrolling? I've never
> > been sure whether to just set both values to the same thing. I don't
> > think I've ever used do
kdf Wrote:
> Audio
> quality of flac vs apple lossless is really an unending argument :)
>
That's an interesting comment. Both formats are lossless, and by
definition that means the bits coming in and the bits coming out are
the same in both cases. They should have the same timing at each end i
After recently buying an SB2, I moved the old SB1 and tried to run it
wirelessly only to find that it would no longer connect to the server.
It would find the wireless network, find the server, say it was
connecting, and then go blank.
To make a long and frustrating story short, I had neglected
Quoting relen <[EMAIL PROTECTED]>:
>
> kdf Wrote:
> > Audio
> > quality of flac vs apple lossless is really an unending argument :)
> >
>
> That's an interesting comment. Both formats are lossless, and by
> definition that means the bits coming in and the bits coming out are
> the same in both cas
I just downloaded the latest beta version of SlimServer to be able to
use the new SqueezeNetwork capabilities and noticed that the behavior
of the various "Browse..." menu items has changed.
When setting up a new SqueezeBox, I would normally remove all menu
items except for "Browse Playlists" and
Ever since I got my first SqueezeBox, I've wondered why Stop and Mute
buttons were not provided on the remote, especially since there are
three empty key spaces available on the remote. These just seem like
very logical buttons to find on a remote control. Also, if they were
simply overlooked, why
Triode wrote:
So:
1) How many users are using non default scroll settings?
Definitely non-default here.
2) How do the following scroll settings work for you:
I use single pixel to get the smoothness I really like.
As for rate I am successfully using 0.008 for double and
0.016 for single.
kdf Wrote:
>
> if you have a music folder set, AND use iTunes selected, it will use
> both.
>
> -kdf
Perfect - thanks!
--
radish
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
i want to install slimserver on my laptop, problem is my files are on
the file server on 2 diff drives, and i cant point to more then 1
drive. is there a way to add more then 1 source folder/drive. i know
that if the server is running on that machine (as it is now) then i
just need to make a short
I am now listening to glorious music pouring through my Eton 11.2
speakers coming from. you guessed it -- the SB2!!!
In my case there were several things going simultaneously and a good,
patient, computer programmer friend came over and plugged away till
suddenly, it worked!!! Problem was, w
40 matches
Mail list logo
