When did you get your SB1? I got mine in January, and initially had
problems with wireless signal strength which were solved with help
from Rico at Slimdevices support. Here are the relevant emails:
| That's pretty recent so I'm fairly certain your player will have the
| purple colored card..
let us know what you find, this is something I will be interested in
doing once I make the plunge and get myself a linkstation.
For mt-daapd on the LinkStation:
Download http://linkstationwiki.org/downloads/ppc/ppc-mt-daapd-0.2.1.1-1.tgz
Unpack the archive to your LinkStation filesystem
Hello,
Hope someone here can help, I only have 2 days to sort this problem out before I
lose the option of returning the Squeezebox.
I have a LS1 running PPC Openlink 0.51b, SlimServer 6.1b2 installed, a Belkin
Pre-N wireless AP and a Squeezebox2 running v14 of the firmware.
Now just to start I
I have two Squeezebox2's, one in my lounge, one in my bedroom. When I first
got them they worked perfectly but after having the one in the bedroom
disconnected for a number of days whilst redecorating, I now cannot get
them both working again.
When I power up the first player it works fine
Quoting Derek Redpath [EMAIL PROTECTED]:
I'm at my wits end. Anyone have any ideas?
crazy idea...check player settings for each player when connected.
Make sure the MAC address reported at teh bottom of teh left side of the web
page is properly matching the MAC address given on the bottom of
I've barely had my SB2 a week. The last two nights it has locked up
during the night while my PC was idle, but not at the same time each
night. I know the time because the clock gets stuck there. Last night
it was 2:21 AM and the previous time it was 9:12 AM.
When I returned to my PC, everything
It would be nice to know from the Task Manager if SlimServer was
running and what the CPU and memory situation was like when you were
not getting responses.
-dean
On Jul 20, 2005, at 10:12 AM, MeSue wrote:
I've barely had my SB2 a week. The last two nights it has locked up
during the night
Quoting kdf [EMAIL PROTECTED]
crazy idea...check player settings for each player when connected.
Make sure the MAC address reported at teh bottom of teh left side of the web
page is properly matching the MAC address given on the bottom of the SB2.
Crazy idea or not I think you're onto
You can edit the MAC address by pressing RIGHT when displaying it.
BUT FIRST...
What is the MAC address listed?
What are the MAC addresses listed on the bottom of the players?
We have seen in a few cases where a bug in the firmware on the player
resets the MAC address. We've fixed at least
kdf Wrote:
Then again, when you think about it, the tar.gz version of the server is
really just a big collection of text-based conf files for making Perl
behave the way you want :)
How I wish I could understand the perl. Even people who might be able
to create simple perl scrips are going
Quoting Bart [EMAIL PROTECTED]:
kdf Wrote:
Then again, when you think about it, the tar.gz version of the server is
really just a big collection of text-based conf files for making Perl
behave the way you want :)
How I wish I could understand the perl. Even people who might be able
I've tried this and only ever get the bounce animation. Are you sure
that the hidden editor is still enabled in the firmware 14? I'm
running 15 now, but haven't had a chance to check yet. I know someone
else posted a while ago that they too couldn't get into the MAC address
editor after you
Could it be that firewall settings on your SP2 machine is preventing
outgoing connections from wmadec?
--
vidurapparao
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
dean Wrote:
You can edit the MAC address by pressing RIGHT when displaying it.
BUT FIRST...
What is the MAC address listed?
What are the MAC addresses listed on the bottom of the players?
Player no.1 serial no. 2301090 mac address 00:04:20:05:A0:8D
Player no.2 serial no. 2302360 mac
Quoting DerekR [EMAIL PROTECTED]:
dean Wrote:
You can edit the MAC address by pressing RIGHT when displaying it.
BUT FIRST...
What is the MAC address listed?
What are the MAC addresses listed on the bottom of the players?
Player no.1 serial no. 2301090 mac address 00:04:20:05:A0:8D
On Jul 20, 2005, at 1:10 PM, DerekR wrote:
I can't get the mac address editor working either. Should it be in
'settings-information-player information-player mac address'?
because pressing right then does nothing.
You'll need to be in the player setup area (what comes up when you
first plug
Neil Sleightholm [EMAIL PROTECTED] writes:
I'm afraid this hasn't been resolved. I believe it is an mplayer issue
but haven't had time to try and debug the problem.
Neil
Just to add to the chorus: I have the same issue. This problem is new on
6.0.2/0.97 - did not occur with previous
tgoldstone [EMAIL PROTECTED] writes:
Check out the Auto Display plugin on the slim devices plugins page. It
might be what you are looking for. It will turn on or off the display
at a set time. I use it to turn the display off at night in my bedroom
as the display is too bright to sleep
That is interesting, what version where you using before? I don't
believe this is an AlienBBC problem, I am sure it is a problem with
mplayer and we don't control that. I have posted a bug report on the
mplayer forum and although someone else had the problem no could offer
a solution.
Neil
--
Which version of mplayer are you all running? The latest version (pre7)
did =not= work on my PC. However, (pre6) appears to work just fine.
y.
--
Yannzola
___
Discuss mailing list
Discuss@lists.slimdevices.com
Even more interesting! I get the problem with pre6 and pre7.
--
Neil Sleightholm
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
My library exclusively contains whole album flac files with embedded
cuesheets. At some point of time (I am not sure when), the playlist
functionality seems to be broken. When I now select Browse Playlists, I
get a playlist entry for each track of each album in my library. In
addition I get an
DerekR
[EMAIL PROTECTED]
wrote in message news:[EMAIL PROTECTED]
Both mac addresses are now set to 00:04:20:09:01:01
I believe the literal translation of that address is:
00:04:20 Slim Devices, Inc
09:01:01HELP
;-)
Ed
lostboy [EMAIL PROTECTED] writes:
http://forums.slimdevices.com/showthread.php?t=14056
For what it's worth: I think that there are very tempting reasons why one
might want to pick music from the air BUT ... I tried it for a while with
DABBar, and while it works in some fashion (channel
I turned off the firewall and got the same results. I set wmadec.exe as
an excepted application and still had the problem.
The following command actually created an mp3 file for me, so I may be
having some problem with socketwrapper:
Another message on volume control just prompted me to post a problem I have
since upgrading to SlimServer 6.0, which dumped some new f/w on to my old
SB1: I use my SB1 to drive a pair of powered speakers via the headphone out.
Before the f/w upgrade, the volume control covered a reasonably
An SB with an FM tuner would probably generate an additional 10% import duty
in Europe and Australia...food for thought.
Patrick
On 7/20/05 4:05 PM, Olaf [EMAIL PROTECTED] wrote:
lostboy [EMAIL PROTECTED] writes:
http://forums.slimdevices.com/showthread.php?t=14056
For what it's
I'm using SlimServer 6.0.2, and it's set to start when Windows starts.
When it tries to initialize, it crashes. When I then try to start it
manually, it comes up fine.
The information in the Windows event log is not very illuminating:
Faulting application slim.exe, version 0.0.0.0, faulting
This was a problem with r3757 - a last minute change that needed a bit
more testing - fixed with 3759 and the soon-to-be posted 6.1.0.
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
My problem is a bit differnt. My old lists don't show up.(old is pre
7-17 upgrade) The only one that did is one I created after I upgraded
to 7-17.
The strange thing is it only worked for a day or two.(auto rescan was
turned on durring this time) The PL was still available to select from
SB
30 matches
Mail list logo
