Xorro;244982 Wrote:
> I have recently installed a new disk, on IDE. I was previously streaming
> from my main HDD on SATA. There is nothing on the new disk other than
> music, I have turned off all disk scanning and indexing to ensure that
> disk reads are being performed unnecessarily. ... I am
> doesn't return anything. am i running it correctly?
It does:
> server:~ dtich$ perl -e 'print $^O;'
> darwinserver:~ dtich$
-> darwin
That's what I wanted to see. But I still don't know why it's using folders it
shouldn't use. :-(
Michael
_
what can i try now to get it up and running again? i've reinstalled
several times, that's not fixing it.
can i manually adjust a plist to get it to write its config in the
correct dir? or something..
arrgghh.
--
dtich
Just a 'me too' for this one. I can't get any Radioio playback through
SlimServer -- it was fine several days ago, but now nothing on any
channel.
Nothing has changed on my config in the meantime and the streams are
fine on a Terratec internet radio, so it's not an ISP issue.
Any ideas..?
--
Stuttering with 75% signal is very wierd. I only have 20% signal and I
can stream FLAC and even LPCM wihout a problem, so you should be fine
with FLAC.
If you play the FLAC files on your PC directly do they play fine? (i.e.
make sure the problem isn't the source).
Things to try .. make the buffe
I really have a throughput problem. When my SB is connected to my WLAN
network I only get a rate of about 200kbps. My setup is a laptop and
the SB both connected to a wireless router.I have tried all available
channels to exclude any interference issues from neighbours etc (Have
only two neighbour
One cause could be that you're using 2 wireless paths...
laptop -> router and router -> SB3
That means that the 54Mb/s is already to be divided over 2 devices but
200kb/s is very low...
--
servies
There are 10 kinds of people in the world - those who understand binary
and those who don't.
My router is a Zoom ADSL X6 - I had wondered if maybe it was something
to do with a setting on the router - though my PC which is connected to
the same router does not have the switch off problem if I use it to run
slimserver to feed the SB3.
One thing I noticed yesterday was that if I have my PC
I have the exact same problem when using WPA-2 and DHCP on the bridged
Ethernet, all other security settings are OK.
It is at the key refresh time the error occurs, after that the DHCP
does not work beyond the bridge
--
allisong
-
dSw;240124 Wrote:
> I've recently had a similar issue with bridging, and it appears to be
> WPA2-related. My Slimserver PC is bridged using my SB2 and I lose
> connection to SS from the WLAN after the WPA2 Group Key renewal
> period.
>
> This is a repeatable issue and is resolved by either reboo
Cracking, cheers
good work on SC 7 looks great! and syncing seems so much better!
--
Gibbo
Gibbo's Profile: http://forums.slimdevices.com/member.php?userid=12331
View this thread: http://forums.slimdevices.com/showthread.
Umm, I'm not the poster you're responding to, but my experience with UPS has
been absolutely horrible. No other shipper ever causes me problem (well,
Canada Post has misdirected two items in 30 years, not bad for somebody who
delivers five addressed items to me per business day).
UPS has taken mo
The search function here does not appear to be working. So I can't
search for old threads on the topic.
I have been using an SB3 for six months with no problems until now. I
connect the SB3 via ethernet but, lately, Slimserver cannot find the
player.
I am using the latest version of Slimserver
What's with the proprietary license agreement on the download page? Is
SS no longer open source?
--
earthbased
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread: http://forums.slim
Slimserver is still open source, but the firmware in the box isn't
(never has been AFAIK)
Ceejay
--
ceejay
ceejay's Profile: http://forums.slimdevices.com/member.php?userid=148
View this thread: http://forums.slimdevices.
A workaround for the dodgy search function is to use google: specify
"site:http://forums.slimdevices.com "
Here the problem is probably not so much slimserver finding the SB,
rather that the SB can't find slimserver. What happens at the SB end
when it is starting up?
It might also help to speci
Mark Lanctot;244756 Wrote:
> That's what I had heard earlier, but this is the first time I've heard
> of a mastering engineer doing it on his own merely due to "fashion". I
> hope it's not definitive of the majority of mastering engineers, because
> it's depressing.
Especially when the band lis
cliveb;244782 Wrote:
> I suspect there's some kind of auto-catalytic network in operation here.
> Producers ask for things to be loud, so mastering engineers oblige.
> Radio listeners like what they hear, so they buy the CDs. Mastering
> engineers notice that compressed stuff is what people seem
servies;245064 Wrote:
> One cause could be that you're using 2 wireless paths...
> laptop -> router and router -> SB3
Definitely, the first thing that must be addressed.
> That means that the 54Mb/s is already to be divided over 2 devices but
> 200kb/s is very low...
In reality you'll never ge
http://www.datakits.co.uk/store/slim-devices-transporter-black-wireless-network-music-streamer-p-4594.html
--
westiebj
westiebj's Profile: http://forums.slimdevices.com/member.php?userid=3145
View this thread: http://forum
Gibbo;245069 Wrote:
> Cracking, cheers
>
> good work on SC 7 looks great! and syncing seems so much better!
Yeah, thats one of the major pieces of work for SC7.
awy has but a lot of work into re-writing the sync code. it is now far
more reliable, no matter what configuration of players and conn
I've been having a recurring problem with Slimserver that I'm hoping
someone here can help me out with.
Slimserver isn't picking up Tags that I'm changing even after rescans.
I've noticed the problem most often with genre tags. Here's what I've
tried:
1. I've changed the tags in itunes.
2. Whe
Anyone? Anyone? Still struggling to find and answer.
Thanks,
Jason
--
jmusante
jmusante's Profile: http://forums.slimdevices.com/member.php?userid=4011
View this thread: http://forums.slimdevices.com/showthread.php?t=40
earthbased;245080 Wrote:
> What's with the proprietary license agreement on the download page? Is
> SS no longer open source?
This has been covered before if i remember right.
It's the lawers justifying their retainer fees :)
Don't worry, SlimServer (now SqueezeCenter) is still open source. Th
I just tried it yesterday with a softsqueeze and if syncing is very good
(perfect?) after a couple of second, resync on "skip track" or
"play/pause" alway gives some stuttering/weird lack of sound during
synchronisation (0.5 to 3 secs).
The computer running softsqueeze is not a formula one... is
vrobin;245105 Wrote:
> The computer running softsqueeze is not a formula one... is this little
> imperfection the fault of my computer/softsqueeze or would this be the
> same with two hardware squeezebox?
Actually you just reminded , I think SoftSqueeze is the exception to
what i said above :)
T
I will concede that I may be the luckiest shipper in the world. I have
never had a problem with UPS.
Canada Post on the other hand:
No attempt to deliver/ falsified notices of delivery attempts, so I
have to pick it up myself.
No attempt to deliver/no falsified notification of attempt to deliv
I'm using the softsqueeze 3.5 (i think) shipped/linked with SC7,
installed by javawebstart. But anyway, I'm using foobar on my computer,
I just tried for the fun of it and to see how synchronization is
working.
Maybe in a couple of month, when I have my new SB/Jive remote and a
pair of Audioengin
Try pointing to a subdirectory (e.g. J:\Music) rather than the root,
I've seen that help sometimes.
--
radish
radish's Profile: http://forums.slimdevices.com/member.php?userid=77
View this thread: http://forums.slimdevices
It does seem to be much better than it was with the updated softsqueeze
and a SB3, to the extent that I am now annoyed as my office upstairs
and my lounge system play perfectly in sync, but my kitchen system
connected to my SB by logitech wireless music system is actually out by
a fraction of a se
Hi,
I read a few threads about streaming to PocketPCs. I was able to get
Resco PocketRadio working on an AT&T Tilt with SlimServer 7.0 beta.
Thanks for all the help.
Regards-Michael G.
--
mgerbasio
mgerbasio's Profile: ht
Dan Sully;135132 Wrote:
> Plans are to do this for 7.0
>
> http://svn.slimdevices.com/trunk/server/Slim/Utils/ChangeNotify/
Any news on this?
--
mavit
mavit's Profile: http://forums.slimdevices.com/member.php?userid=102
If you do a search in these forums (fora?) for Datakits you'll find out
what others think of this company: I've no experience of them myself,
but others have . . . .
--
morris_minor
morris_minor's Profile: http://forums.sl
funkstar;245104 Wrote:
>
> The new Jive platform is also completely open source. In fact, as the
> current Beta Jive hardware is based round a linus kernel, the whole
> platform is open source.
>
Well, actually I don't think this is completely true. The Jive software
is not open source as open
Mark Lanctot;245088 Wrote:
> Definitely, the first thing that must be addressed.
>
>
>
> In reality you'll never get 54 Mbps, it's more like 20 Mbps. In my
> case it's about 13 Mbps.
But that can't be the reason. Even though the bandwith is shared
between both SB and laptop there should be p
Wah
Changed router channel to 13 - dire, everything just tuttered.
Changed to channel 1 and now the SB3 survives the microwave, my higher
resoultion (24/48) ripped vinyl files all get through without missing a
beat, and I'm sure the whole shebang sounds a little better (but that's
just pr
cliveb;244782 Wrote:
> Radio listeners like what they hear, so they buy the CDs. Mastering
> engineers notice that compressed stuff is what people seem to want, so
> they start to apply it as a matter of course.
That's not true. It's been proven that music that's mastered FULL
SCALE sounds WOR
Has MusicIP completely gone through the process of analysing your
tracks? (This process can take days depending on your library size and
gruntiness of your PC.)
You can also select parameters regarding how similar to the original
track you want the playlist to be. I've found that tweaking these c
> what can i try now to get it up and running again? i've reinstalled
> several times, that's not fixing it.
You can try to run it from the terminal:
cd /Library/PreferencePanes/SqueezeCenter.prefPane/Contents/server/
./slimserver.pl
Michael
___
discu
Wicewolf;245135 Wrote:
> But that can't be the reason. Even though the bandwith is shared between
> both SB and laptop there should be plenty of resources to give much
> better performance than this. Besides I have tried both the SB and my
> laptop installed at my friends wlan and there was no pr
>I have tried both the SB and my laptop installed at my friends wlan and
there was no problem at all<
Pretty much says your wi-fi access point/router isn't too clever OR
your site is suffering a lot of interference on the wi-fi frequences.
--
amcluesent
I took my chances and did a fresh systeminstall since the system has
behaved somewhat erratic (and I REALLY wants this to work). What
puzzled me, among others, was that I was presented with no admin pw on
installing SS (neither SC 7.0a for that matter). It didn't happen this
time either thou now
I had to reformat my hard drive and reinstall everything. Library worked
fine before that. Now 0 artist showing as described above. My music was
ripped using Media 11 and resides on an external drive. Thanks for any
help.
--
Ragjack
--
Thanks for the suggestions. Yes, the track analysis shows 0 on the
MusicMagic API, it took about two days to go through the all the songs.
I'm not sure what some of the settings actually change so I'll do some
searching.
Changing "How much like the artist style" from 0 to 100 gave me a
better mix
Hi,
I have two SB3, an older silver one and a new black faced one. The
silver unit works fine, no issues. The black unit does have one issue
- if I change songs, there is approximately half a second of noise. It
almost sounds like scratching on a LP record. This noise only happens
when I chang
Hello everybody,
This topic seems to deserve a bigger attention then it have. I
downloaded test files, and can fully confirm all claims by sikahr - it
seems there is a serious bug in Squezebox mp3 decoder.
I also made some new tests, some analyze, and my conclusons are:
1. Effect is related to
Here is a small listening test, similar to one that sikahr provided.
I choose a five different music tracks, and provided a four different
samples (*1 to *4) for each one:
*1. The original wav file, ripped from 44100/16 audio cd, lowered
20dB.
*2. Mp3 file encoded from sample *1, using lame --a
And now something for techies only.
I made a -60dB sine file, and went through the same process as above.
The resulting files are analyzed by spectrum analyzer and presented as
follows:
green: (*1) original 16-bit wav file synthesized by soundforge
violet: (*4) wav file obtained by compressing a
i get same thing:
server:~ dtich$
/Library/PreferencePanes/Slimserver.prefPane/Contents/server/slimserver.pl
mkdir /private/var/localadmin: Permission denied at
/Library/PreferencePanes/SlimServer.prefPane/Contents/server/Slim/Utils/Prefs.pm
line 450
server:~ dtich$
Michael Herger;245153 Wro
ok. think i fixed it, here's what i did:
the slimserver.pref file in my home dir said this:
---
ixType: 0
MMMSize: 12
MMMStyle: 0
MMMVariety: 0
MMSHost: localhost
MMSport: 10002
MusicMagicplaylistprefix: "MusicMagic: "
MusicMagicplaylistsuffix: ''
allowedHosts: 127.0.0.1,192.168.0.10
artfo
I just installed the new softsqueeze & it looks great with the
Transporter. Are there any plans to allow drag n drop on softsqueeze or
slimserver? That is the only major drawback to the program.
Thanks
--
jmack
jmack's Pr
I took my Squezzebox to a friends house and connected to his network and
it failed to stay connected to either slimserver or squeezenetwork for
more than a few minutes. Put his box on the networked and it would
work just fine. repeated that step about four times with the same
results. His works
On 25-Nov-07, at 12:32 PM, damir wrote:
>
> Hello everybody,
>
> This topic seems to deserve a bigger attention then it have. I
> downloaded test files, and can fully confirm all claims by sikahr - it
> seems there is a serious bug in Squezebox mp3 decoder.
>
it has the attention of the former CE
On 25-Nov-07, at 9:43 AM, mavit wrote:
>
> Dan Sully;135132 Wrote:
>> Plans are to do this for 7.0
>>
>> http://svn.slimdevices.com/trunk/server/Slim/Utils/ChangeNotify/
>
> Any news on this?
>
none, sorry.
-kdf
___
discuss mailing list
discuss@lists.sl
As the owner of a SqueezeBox and contributor of a bunch of 96 kHz/24-bit
tracks to the Transporter demonstrations that are ongoing, I thought I
would let visitor of this site know that our new site iTrax is up and
running.
The site hosts about 33 HD Audio albums with more on the way. These
track
Not to forget some of os have put down substantial investments in
hardware which will not function because of erratic software. Who is
responsible? I have reported my problem to Logitechs support team 21st
of nov but STILL no answer!!!
I can live with problems provided I feel I get support but neg
I still gotta say - MP3 is a "good enough" format. It's a "good enough"
approximation to the original that as long as it sounds "good", it's
"good enough" IMHO. And yes, the SB3 MP3 output is "good enough" to my
ears.
Sure if there are obvious errors they should be squashed (and they are
being
I bought a new Transporter 2 months ago. It seems to have developed some
problems. For example, after I choose a song from my HD, if I change the
volume control before it plays the song, my Transporter will freeze. It
also has other problems like stopping without any reasons.
The transporter runs
To reload the firmware, press and hold brightness.
Other alternatives:
- to resolve audio playback problems, unplug power, press and hold "1",
replug power (Xilinx reset)
- to reset back to factory default, unplug power, press and hold
"+/ADD", replug power, but you'll have to re-enter all netw
I had the same problem -- specifically with the same intermittent
symptoms juck mentions in this thread (hissing, popping, bright light
on display).
I was running server 6.5.4, firmware 81, Intel Mac. I tried switching
to 7.0a beta, 6.5.3, 6.5.2, and 6.5.1. I tried a wired connection.
Nothing wor
Wicewolf;245135 Wrote:
> But that can't be the reason. Even though the bandwith is shared between
> both SB and laptop there should be plenty of resources to give much
> better performance than this.
Servers are really meant to be wired. Really.
If a wireless server works for you, great, but i
Thanks for the suggestions. Yes, the track analysis shows 0 on the
MusicMagic API, it took about two days to go through the all the songs.
I'm not sure what some of the settings actually change so I'll do some
searching.
Changing "How much like the artist style" from 0 to 100 gave me a
better mix
On Nov 25, 2007 5:31 PM, Mark Lanctot
<[EMAIL PROTECTED]> wrote:
>
> Sure if there are obvious errors they should be squashed (and they are
> being diligently looked at!) but put it into perspective - it isn't the
> end of the world. If you're really concerned about sound quality use
> lossless -
You might consider buying a new router as AFAICT the Zyxel ZyAir B-2000
is a 802.11b only router - which canonly offer 11Mbs max.
--
bpa
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread:
OSX Tiger. Cleared and rescanned my music library because my playlists
would display, but I couldn't access any music off the playlists. Now
everything works but 0 Artists displayed. Artists were all there
before rescanning. Will try rescanning again and rebooting to see what
happens.
--
jmsen
mgerbasio;245213 Wrote:
>
>
> Changing "How much like the artist style" from 0 to 100 gave me a
> better mix but still strange selections.
>
>
Those strange selections are one of the reasons I like it. :) Since it
does not consider tags, genres or the like, it is based purely on the
audio f
Are you referring to SlimServer (6.5.4) or SqueezeCenter (7.0)?
SqueezeCenter does support drag n' drop for the default skin,
SlimServer doesn't (except the SlimFX skin).
If you're referring to dragging-and-dropping tracks from SS/SC to
SoftSqueeze, that's not how it works and it will never work
bpa wrote:
> You might consider buying a new router as AFAICT the Zyxel ZyAir B-2000
> is a 802.11b only router - which can only offer 11Mbs max.
Just checked the Zyxel site and there is no mention of 11g on that model.
While 11b has a theoretical max of 11Mb, it rarely delivers that. With
two w
KDF,
Thank You for the warm welcome to my friend Damir which I beg to do
some listening/analysis because almost nobody on this board/planet
listen to mp3 & wants to do some listening tests (Sean/slimdevices
excluded).
Nenad
--
sikahr
---
Have purchased Squeezebox.v3 this past week. I can get Squeezebox to
play my mp3 library through a wireless connection (via Slimserver),
however I cannot access any Internet Radio or the Squeezenetwork. I am
using a Linksys wireless G compact USB adapter and a Linksys Wireless
-G Broadband router.
I hope this helps... but I just started developing this same issue over
the weekend. The squeezebox would all of a sudden stop playing right
in the middle of a shuffled selection of MP3s or internet radio.
Sometimes the squeezebox would continue playing, but the display would
go completely black
starbard;244851 Wrote:
> The Sirius plugin stopped working for me several days ago. I haven't
> made any changes. It doesn't give any response or error message when I
> try to play a station. Is anyone else experiencing this problem? Any
> idea what's going on?
>
Hey Al-
What version of the
I installed slimserver 6.1.1 on my Terrastation and it works great to
the softsqueeze 2 that is included in the package but I like the look
and feel (especially the headless) of softsqueeze 3 player. Should they
work together? I have had no success, the display flickers and says it
can not connect
Any idea what I need to do to get slimserver to update? I added an
album to itunes (7.5). Hit clear library and rescan everything
(slimserver 6.5.4) on a mac OSX.4. New album nowhere to be found?!
What should i try next?
Tony
--
tday01
--
Same here:
VERSION INFO
SlimServer Version: 6.5.4 - 12568 - Debian - EN - iso-8859-1
Server IP address: 192.168.1.9
Perl Version: 5.8.8 arm-linux-gnu-thread-multi
MySQL Version: 5.0.41
I transcoded a few files to FLAC (from WMA) and did a rescan. After
completing, I'm getting the songs by
Hi,
I am also having problems since installing 6.5.4 on a previously stable
6.5.3 vista install. Slimserver starts fine and runs in the background
OK - my 3 squeezboxes run fine on a wireless G network, but when i open
slimserver in internet explorer 7, it freezes the first time it
'refreshes' th
erland;245131 Wrote:
> Well, actually I don't think this is completely true. The Jive software
> is not open source as open source is normally defined. I believe the
> source is public and you can modify it for your own use, but you can't
> redistribute the original or modified code without permi
On 25-Nov-07, at 4:52 PM, sikahr wrote:
>
> KDF,
>
> Thank You for the warm welcome to my friend Damir which I beg to do
> some listening/analysis because almost nobody on this board/planet
> listen to mp3 & wants to do some listening tests (Sean/slimdevices
> excluded).
>
You are most welcome.
jmack;245183 Wrote:
> I just installed the new softsqueeze & it looks great with the
> Transporter. Are there any plans to allow drag n drop on softsqueeze or
> slimserver? That is the only major drawback to the program.
> Thanks
And if you mean dragging an audio file in windows onto SoftSqeeze
Thanks Mark. Your instructions worked well!
--
vett93
vett93's Profile: http://forums.slimdevices.com/member.php?userid=13301
View this thread: http://forums.slimdevices.com/showthread.php?t=40573
> I have reported my problem to Logitechs support team 21st
> of nov but STILL no answer!!!
Did you contact support directly? This is _not_ support here, but a community
based forum.
Please try to follow the instructions I've given to you and others. You've
asked more questions than you've answ
Funny you mention it - just happened to me in the middle of a playlist
between songs, where I got random scratching sounds. It had never
happened before, and it didn't reappear as I played the same two song
sequence. Perhaps that random cosmic ray effect we joked about a while
ago does indeed rear
> supporting. Appears to be an Internet explorer / slimserver problem.
Do you see the same freezes if you connect to your server from a different
machine? Or with FF instead of IE?
Michael
___
discuss mailing list
discuss@lists.slimdevices.com
http://l
83 matches
Mail list logo