Of course, you can buy a cable at Radio Shack and connect the audio output
from your Mac to the audio input an another Mac and record it. This
arrangment will degrade the quality a little, but since RealAudio is not
"hi-fi" to begin with, you won't notice it. If you want to spend more time
and a
heir powerbooks working
again, after many hours of frustrating work, and
will recommend that others send the 'books to MCE.
Net result: Increased business for MCE.
Jerry Krinock
San Jose, CA
on 01/06/17 22:16, chuck goolsbee at [EMAIL PROTECTED] wrote:
>> However
ery chamber
a couple months ago, I suspect, as have others, that the GLOD is due to
connector(s) between circuit board(s) wearing, possibly cracking and
becoming intermittent with age.
Jerry Krinock
San Jose, CA
--
Duo/2400 List, The friendliest place on the Net!
A lis
Neil,
You should say what model Mac you're trying to start.
Jerry
on 01/07/30 09:22, Neil Heyde at [EMAIL PROTECTED] wrote:
> Dear List,
>
> If anyone could help me with trying to startup from a non-Apple CD drive I
> would be most grateful. I'm using 8.6 and I also have FWB's CD Rom toolkit,
me problem. I tried putting a space ahead of the name to make
it load earlier but that did not help either.
Jerry Krinock
San Jose, CA
P.S. I know should go out and buy one of the new powerbooks, but I am so
busy using this old 2400 with Interware G3 that I just have not been able to
commit t
work?
Thanks,
Jerry Krinock
San Jose, CA
--
>From my earlier post:
When I launch the Monitors control panel, I get an alert which says:
"Monitors cannot be used because a required extension, Display Enabler, is
disabled or not installed. Use Ex
t; also requires a System Extension called SystemAV).
If anyone knows better than this, please reply and explain.
So, maybe I can get my Powerbook to work with a projector now. Thanks to
Chuck Goolsbee and Ralph for helping me fix this.
Jerry Krinock
San Jose, CA
> I have a 2400c, running MacOS 8
ass. You also need the Serial Tool extension. I recommend making an
extension set that has only the Serial tool and testing it with this.
Jerry Krinock
San Jose, CA
on 01/09/06 06:28, Robert A. (Bob) Hall at [EMAIL PROTECTED] wrote:
> I have a 2400c that now takes approximately 8 minutes
the upgrade which you got is for 8.5->8.6, I agree with the above. You
need to get from 8.1->8.5 first, and that involves alot of new files. It
was sold as a complete reinstall, not an "upgrade".
Jerry Krinock
San Jose, CA
--
Duo/2400 List, The friendliest place on the N
Sorry John, your soldering capability won't help until you diagnose the
problem. It could be on one or more of several boards (main logic, CPU,
I/O-Power), and the only practical way to diagnose it is to swap boards on
the bench with known good boards. As Tom said, you need a "parts" machine.
Th
? for a few seconds, then the CD-ROM will start
grinding.
Good luck,
Jerry Krinock
San Jose, CA
>
>
> --
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/Duo
or Proxim/Farallon
Skyline 11. It provides the same wireless function as an Airport card.
I just happen to be selling my Farallon Skyline 11 card on ebay:
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1298464651
Jerry Krinock
San Jose, CA
on 2001/11/19 11:59, [EMAIL PROTEC
.3),
which was suggested in an Apple TIL. The drive is a 10 GB IBM unit from
MCE.
Still, it clicks and dies when trying to wake!
Thanks for any suggestions,
--
Jerry Krinock <[EMAIL PROTECTED]>
San Jose, CA USA
--
Duo/2400 List, The friendliest place on the Net!
A listserv for u
My 2400 has the Interware 320 MHz G3 card, 10 GB HD, 80 MB RAM, and lots of
accessories, but it's got some things broken and has been very highly used:
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1314264329
Jerry Krinock
San Jose, CA
--
Duo/2400 List, The friendli
Tho,
I would not try this if I were you. The plugs are usually molded on. The
pins are spaced much tighter than what connectors were in the "old days" (5
years ago), and finally the wires may be litz wire which I've never been
able to solder with a soldering iron. I don't know how they do it.
ife is gone out with the girls.
> Seriously though, if I could live with a bigger case, I'd be using a
> bigger laptop.
How big are your splice "lumps" going to be?
Jerry
>
> Tho
>
>
> Jerry Krinock wrote:
>> I would not try this if I were you. The plug
her.
>
> Tried everything, and all of them work, including a USB card reader with
> intergral cord. Saved 1/2 lb of cable weigh :-)
> The cost of this particular lesson is remarkably low.
>
> Tho
>
>
>
> "Tho X. Bui" wrote:
>>
>> Jerry Kr
I did audio recording on my PB2400 with 10 GB drive and maybe had the same
problem, but it was a Hitachi drive installed by MCE. The problem is that,
once every 3-4 minutes, it will lose about 1 second of audio. I remember
tryng some kind of app that was supposed to fix it, probably APM tuner, a
on 01/03/14 03:51, george ruta at [EMAIL PROTECTED] wrote:
> hello all,
> i just bought a pb 2400(my first!). all seems well except the palm rest
> seems a little raised up to the left of the trackpad. the keyboard is flat
> except for ctrl-opt-command keys and left side of space bar which are ve
Also, be careful that the "off" and "no encoding" are properly set in each
message you send. I do not know of any way to turn them off for good. I
believe they turn on by default with each new message.
However, more to the point, if your mail server is a standard SMTP/POP3
server (which it prob
following
text in a good place
Jerry Krinock
San Jose, CA
Step 1. As others have advised, if it is still attached, you should remove
the white plastic "scissors thingy" ("scissors") from the key cap.
Step 2. If necessary, replace the rubber spring. This goes into the hole
I have the Newton Connection Utilities still on my hard drive which I could
email to you, and you could drag it to your hard drive, but as I recall this
software was pretty tricky to get working. Does anyone know if it requires
any system extensions? I don't think so, but you need the Claris XTN
,
Jerry Krinock
San Jose, CA
P.S. What I need are the System Extension files which are Open Transport
2.0 (2.0.3?). This probably means any file in your Extensions folder which
has a name beginning with "Open Transport" or "Open Tpt", if these are
version 2.0, 2.0.3, etc. I'
Eric,
Thanks for thie idea, but there is no link to the basic Open Transport
extensions. They only have the "Extras". I still need the extensions, if
anyone has them!
Thanks,
Jerry
on 01/04/15 11:34, Eric L. Strobel at [EMAIL PROTECTED] wrote:
> on 4/15/01 12:04 AM, Jerry Krin
port 2.5 consists of only two files:
Open Transport
Open Transport ASLM Modules
on 01/04/16 06:11, Eric L. Strobel at [EMAIL PROTECTED] wrote:
> on 4/15/01 9:36 PM, Jerry Krinock at [EMAIL PROTECTED] wrote:
>
>> Eric,
>>
>> Thanks for thie idea, but there is no link to
don't use it on a Powerbook 2400.
Thanks to Dean Reichert for his help with this!
--
Jerry Krinock <[EMAIL PROTECTED]>
San Jose, CA
Sent with Outlook Express for Macintosh
--
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportab
The last time I was in an airport, I could not find an electrical outlet
because there were a half dozen other thiefs like you (and me) who were
already stealing all the nearby electricity. With those inefficieint
Pentium IIIs now going into notebooks, this situation is likely to get worse
in the
At home I use a G4
> and am planning to get ethernet soon. The G4 and the DuoDock are linked
> together so that I can easily exchange files. The only time I use the
> portable is when I'm traveling.
>
> Yours truly,
> Lewis Coleman
>
>> From: Jerry Krinock <[E
Jay,
I use Outlook Express on my 2400 and agree with all the nice things you said
about it. Regarding:
> I got sick of email errors if I wasn't on a network-enabled location
> (Yes, OE and Entourage are Location Manager savvy).
I was not aware of this and would like to use it as you do, since
I have an Apple drive that will never boot my PB2400, but my LaCie 32x CDRW
works most of the time.
I am a great believer in SCSI Voodoo. Here is my liturgy. It sounds silly
but, seriously, it works for me, about 80% of the time, which I believe is
way ahead of competitive rituals.
Put CD in d
tured
the drive. "Your results may vary".
Jerry
on 01/05/08 11:10, John Balint at [EMAIL PROTECTED] wrote:
> Which apple drive isn't booting the system???
> They all should...maybe not the original CD SC
>
> on 5/8/01 1:49 PM, Jerry Krinock at [EMAIL PROTECTED] wrote:
&
31 matches
Mail list logo
