On 10/17/2016 5:20 PM, Phil Townsend Lontz wrote:
...
I eq the crap out of the K3 after 8K and set the tone of my CW note to 440…
Near a natural “C”.
to me that sounds easy and warm.
When did this musical standard get changed? I've always tuned to A440.
Guess I'll need to tune all my
OK, I know this thread is getting too long, but…
When my beloved Grado SR-60 headphones died, I used my Yamaha CM-500 phones for
music. They were terrible. Not even good enough. So I ordered Grado SR-225e
phones. And the cord for the SR-60 phones is part of my PTT hand switch. The
CM-500
I definitely agree with using good quality headphones for optimal
listening. But, headphones are a different psycho-acoustical experience
than a speaker system. Personally, I prefer to listen to a speaker
system. Headphones VS: Speaker system will be different for everyone.
But, if you
Thanks, Wayne. This thread has been very interesting!
73
Matt NQ6N/9
On Mon, Oct 17, 2016 at 10:40 PM, Wayne Burdick wrote:
> Our entire product line emphasizes portability, so we'll just have to
> continue the never-ending search for 12 volt mojo. (Note: the new Upgrade
>
Our entire product line emphasizes portability, so we'll just have to continue
the never-ending search for 12 volt mojo. (Note: the new Upgrade is a case of
this; IMD is improved when running from lower voltages.)
Stick with Elecraft and minimize your carbon footprint!
73,
Wayne
N6KR
On Oct
Love the the Ety's in the ear with the custom ear molds. They are very
comfortable too.
And block out EVERY THING!
What me worry?
> On Oct 17, 2016, at 9:15 PM, Jim Brown wrote:
>
>> On Mon,10/17/2016 7:56 PM, Ron D'Eau Claire wrote:
>> Of course the room in which
I worked with someone who had two sound-absorbing pillars in the corners of his
office. Of course, he’d just recorded his 8th or 11th album, depending on how
you count, and he’d produced the latest one. Mitch Easter was busy this time.
I’m not nearly that picky and have some hearing loss by
On Mon,10/17/2016 7:56 PM, Ron D'Eau Claire wrote:
Of course the room in which the speaker is used has a huge effect too.
When you're sitting right in front of a loudspeaker you're in its near
field. That causes what you hear to be dominated by direct sound from
the loudspeaker. The
Wayne,
Is there a way to do this " at home" ? Since I´m in Sweden
it might not be practical to send the radio all the way to
California for this.
73 Jim SM2EKM
--
On 2016-10-17 02:25, Wayne Burdick wrote:
Knut,
The K3S as originally shipped does not
Of course the room in which the speaker is used has a huge effect too.
I dread to think we'd require anechoic chambers for Hamshacks!
73 Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug
Person
Sent: Monday, October 17, 2016 7:27
Wow Phil, right on. My first career was a buyer for an audio chain. I
listened to everything they brought in. My assistant and my secretary
and I NEVER agreed on what system sounded best. I would think a speaker
that is reasonably flat from 200 hz to maybe 5khz with low mechanical
I do not have this problem, and I have P3/SVGA. Do you have all the latest
production firmware? Or have you installed a beta?
73, Guy K2AV
On Mon, Oct 17, 2016 at 5:59 PM, Irwin Darack wrote:
> I have a P3 with the SVGA board installed + an external monitor.
>
> SVGA Monitor
On Mon, Oct 17, 2016 at 7:47 PM, Kevin wrote:
> The problem I have is accepting the status quo by Elecraft. Just because
> everybody else is around -30dB shouldn't mean Elecraft stop trying to do
> better. Let the portable/backpacking rigs use 12V MOSFETS and switch the
>
Well one of the main reasons I love my K3S is because of weight (or lack of
it). Due to back problems, I cant move that 40-50 pound rig to the bench to
do any adjustments, repair, etc.
I can take my K3S to the beach house with ease and have a nice 100 watt
radio.
Each of us has their own needs
Hmm, compliance with what? The rig meets Elecraft specs and since the
FCC doesn't regulate TX IMD there is nothing to comply with.
The problem I have is accepting the status quo by Elecraft. Just because
everybody else is around -30dB shouldn't mean Elecraft stop trying to do
better. Let the
I have spent may years in “hi end” audio… some building some selling some just
fooling around. Does wire matter? is there a difference between tubes and soild
state? Can I hear 20K? does it matter if I can’t hear 20K? Why build a wide
band amp if you can hear it?
All these questions really
Charlie,
You hit the nail on the head.
Mark Musick, WB9CIF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Charlie T, K3ICH
Sent: Monday, October 17, 2016 9:04 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S QST Article
Now, I may be
Seems I can't go wrong with Elecraft, Phonema or Palstar speakers, assuming
the wallet factor is a near-draw at too expensive :-)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Speakers-Optimal-Frequency-Range-tp7623428p7623471.html
Sent from the Elecraft mailing list
I have a P3 with the SVGA board installed + an external monitor.
SVGA Monitor Height = Main
P3 = 30
When ever I turn on the P3 (and monitor), I need to reset the Waterfall
Height. The Height is fine on the P3, but takes up 3/4 of the screen on
the external monitor. The P3 remembers the original
Jim,
Your new rig had nothing "defective." It was "in compliance" when you bought
it. Subsequent to your buying it, that particular in-compliance specification
has been improved. There is nothing for Elecraft to fix because there is
nothing broken. No warranty extends to future
Jim,
Elecraft sold you a K3S that *was* in compliance and will still be if
you do nothing. See Wayne's post yesterday. They improved the Transmit
IMD for the current K3S and are offering to make that change to older K3S.
They are going out of their way to add the change to your K3S free of
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px
#715FFA solid !important; padding-left:1ex !important; background-color:white
!important; } Hear, Hear!
Bob/AA6VB
Sent from Yahoo Mail for iPhone
On Monday, October 17, 2016, 4:03 PM, Charlie T, K3ICH
Now, I may be miss-interpreting what's happening here, but I feel is that
this whole thing is being taken "slightly" wrong by several people.
VW purposely faked the test to meet a gov't spec.
However, Elecraft sold a radio that DID meet their published specifications
for transmit IMD which are
I have been a loyal Elecrafter for many years, and this seems to be
somewhat similar to the VW diesel problem.
Elecraft has sold me a radio specifying it to be in compliance with
specifications of IMD. Now you are telling me that I must bear the
burden of time and expense to bring the device
Your logic is good, as usual. But let's look at the physics of
loudspeakers, which I tried to do on an earlier post. A SMALL diaphragm
has better dispersion of high frequencies, while it doesn't produce loud
bass. We don't need loud bass, so a GOOD small diaphragm loudspeaker is
what we need.
K3 -100 in mint condition with included power supply, mike, outboard speaker,
Bencher paddle and keyboard capability with outboard Hamgadgets Master Keyer
and blue tooth connected keyboard. E mail for more details and pix.
Bill Hartman
n...@aol.com
How about a user adjustable amplifier on set point? In my case there is a
2 watt jump when going from 12 to 13 watts and if a person wanted a
smoother output in that range for an amp or whatever it would be possible.
John KK9A
from: Wayne Burdick n6kr
Wes,
This would be a simple firmware
I am trying to record a CW message in KX3. I push REC, then number, use KXPD3
and than tap MSG to finish. This works well when I program a callsign (e.g.,
NO9E). When I program a message (e.g., CQ CQ de NO9E NO9E), it seems that
the message is recorded but it does not play. Pushing few buttons
Jim,
Contact support to get all the latest information on the upgrade and
start the process for sending it in.
73,
Don W3FPR
On 10/17/2016 8:50 AM, Jim Finan wrote:
Has the mechanism for the K3S returns been set up yet?
I suppose turn-around time also needs clarification too.
Has the mechanism for the K3S returns been set up yet?
I suppose turn-around time also needs clarification too.
Not many manufacturers would do this sort of upgrade, let alone for 'free'.
Thanks!
73,
Jim
Jim Finan
AB4AC
Sent from my BlackBerry 10 smartphone.
Original Message
From:
I want to formally apologize for bringing up this thread which appears to be
going on forever.
Due to an oversight on my part, it was completely unnecessary anyway.
If you want to comment further send your "slings & arrows" directly to me
and stop subjecting everyone to a truly "OT" thread.
Hi,
I am looking for used Elecraft KAT500 in 100% conditions to complete my K3
line and use the KPA500 safely. Many thanks for kind offers or tips.
73 - Petr, OK1RP
http://ok1rp.blogspot.com
-
http://ok1rp.blogspot.com
--
View this message in context:
(BTW I wrote the following ~3 years ago before APF was changed from HOLD to
TAP on DUAL PB):
##
I use APF virtually all the time and never use RIT, SHIFT, etc. Just HOLD
DUAL PB to actuate APF and use the VFO to zero beat. COARSE (10
"Due to the odd way Elecraft chose to label the new K3s, I would request
that
when referring to multiple radios, use the terms K3's or K3s' rather than
simply K3s which implies a single radio."
Please. let us not fall into the improper use of the apostrophe
that is so common these days. One
Hmmmthinking about what Martin wrote, a K3Snkinda like Snorkel?
Gary
-Original Message-
From: "Martin Sole"
Sent: 17/10/2016 2:21 PM
To: "elecraft@mailman.qth.net"
Subject: Re: [Elecraft] Speakers - Optimal Frequency Range?
It's
35 matches
Mail list logo