Hi Elecraft gang, any recommendations for Nimh batteries for my new KX3?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This lis
On Sat,1/14/2017 6:57 PM, Jeff wrote:
Does anyone have a spare, or unused bias battery box that came with your Yamaha
CM500 headset? I desperately need one to use my headset with a radio other them
my K3.
Sort of near the end of this set of slides are simple instructions for
using ANY electr
What I would like is to have the REF LEVEL semi-automatically settable. Here is
what I mean: I would like to be able to adjust the level so that the noise
level is in a particular relationship to the base line and save that
relationship. Then I would want to push a button and restore it.
Note t
Good Evening,
A winter storm came on shore sometime last Sunday. By Monday night
there was another 20" on snow on the ground. It was also bending many
of my trees almost to the ground. That night a number of trees exploded
under the weight; twenty foot sections of their trunks turning i
Does anyone have a spare, or unused bias battery box that came with your Yamaha
CM500 headset? I desperately need one to use my headset with a radio other them
my K3. Please reply offlist. Thanks, and sorry for the off topic...
73 Jeff kb2m
_
Is there a way to make the P3 auto adjust it's scaling?
I have a mcHF kit that I built that has theis feature and it's quite handy?
Thank you
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
On 1/14/2017 11:30 AM, Bruce Miller wrote:
Thank you to both Ross and Don for your suggestions. It looks like
Don had the right diagnosis—by turning the Windows and the MicroKeyer
drive levels up to about 75%, and then restarting everything, I
started getting power out on all digital modes. I th
I use the Yamaha CM500 from Amazon about $58 with my K3. I bought the Koss
SB45 from Amazon about $23 shipped. I think the Koss is every bit as good
as the Yamaha. I haven't used the Koss on the K3 but expect it would
perform equally. I use it on my Icom 7300 and get nothing but good reports.
I use an older Heil pro set with HC-5 element on my K3, with great results.
One nice thing on the K3 or K3S is that you can plug the two 3.5mm plugs
directly into the back of the rig- no adapters needed, and no cables
hanging out the front of the radio.
However, my advice to anyone is that the most
When you turn off the switch on the meter you are cutting power.
When you turn of the PS you are probably watching the PS Caps bleed down to
zero (hence the fade)
From: stan levandowski
To: Elecraft@mailman.qth.net
Sent: Saturday, January 14, 2017 12:25 PM
Subject: [Elecraft] (W1) W
Bruce,
Check the mic element in that ProSet - the type is normally printed
where the microphone boom attaches to the headphones.
If it is an "iC" type, you need to turn bias on.
If there is a capacitor in series with the AF line in the MicroKeyer,
then setting bias on in the K3 will not be ef
I rewired mine so that it is always on when connected to external 12V, and
the switch just switches the battery into the circuit for portable
operation. I
was always killing the battery by forgetting to turn it off when I powered
down the station, this takes care of that problem!
Chip
AE5KA
On
Stan,
That orderly shutdown process only applies to the K3, K3S, KX3, KX2, P3,
PX3, KXPA100, KPA500, and KAT500.
The rest of the gear that Elecraft produces can be powered on/off with
the station supply with no ill effects.
73,
Don W3FPR
On 1/14/2017 12:25 PM, stan levandowski wrote:
Will I
Will I harm my W1 by leaving the W1 Power slide switch in the "on"
position and turning the meter on and off with my station supply?
I'm asking because the tiny slide switch seems rather fragile and using
it perhaps several times a day is sure to eventually break it.
I noticed that when I po
Thank you to both Ross and Don for your suggestions. It looks like Don had the
right diagnosis—by turning the Windows and the MicroKeyer drive levels up to
about 75%, and then restarting everything, I started getting power out on all
digital modes. I then adjusted the MIC Gain as Don suggested a
What mode do you have the K3 in when you're trying to do this? It needs
to be in DATA-A mode. Good info on setup for digital modes here:
http://www.elecraft.com/K3/k3_operating_tips.htm#psk audio
73, Ross N4RP
On 1/14/2017 9:00 AM, Bruce Miller wrote:
I’ve been working in vain over the past
I have used the Elite Pro with success. The dynamic mic element
version, with bias turned OFF.
For an alternate suggestion, many use and like the (inexpensive) Yamaha
CM-500 / Koss SB-45 headset, with it's electret element.
Ron
On 1/14/2017 9:33 AM, Alex Dokic via Elecraft wrote:
Hi, can
Hi, can anyone advise or recommend what Heil headphones work well with the k3s
many thanks . Alex M0 KVA
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmf
Bruce,
The most probable answer is that you are not driving sufficient audio
into the K3. You must have 4 bars solid on the K3 ALC meter with the
5th bar flashing - this is the NO ALC point for the K3, ignore the
internet advice which applies to non-Elecraft transceivers.
The fact that you
I’ve been working in vain over the past few days to get my K3 up and running
digital modes (other than CW). Several years ago I had things working with a
Navigator interface and my 756 Pro II, but it got fried by a lightening strike
and I’m just now trying to get things working again.
Here’s my
20 matches
Mail list logo