Like so many said, it takes about 8 hours to do a proper K3 build. I started
mine at around 9am and finished the final tests at around 5pm, with a few small
breaks during that period.
I promised my wife that the kitchen counter would be clear by the time she got
home from work, and just
Cool. I'm back in my early 40s again. Awright!
Sent from my iPhone
On Oct 1, 2012, at 5:03 PM, Wayne Burdick n...@elecraft.com wrote:
Matt Zilmer wrote:
Welcome to the 55 club, om.
I'm not really worried, Matt, but thanks for your concern.
On a related sour note, I hear that 60 is the
After sending my note about using the little MFJ power supply at 2.89 amps, I
realized that it works fine on my FT-817D at 5 watts but would obviously be
taxed at the full 12 watts of the KX3. So fuggetabowdit.
Now I'M looking for a sufficient supply for the KX3 ;-)
Bill
WK6A
Sent from my
for the basic KX3, I suggest you look at the
article in QST from November 1993 page 27 for a 5 amp regulated 13.8 volt 5
amp power supply with crowbar overvoltage protection. We are hams, so think
build your own It is a good philisophy/
73,
Don W3FPR
On 9/18/2012 4:53 PM, Bill Tubbs wrote
Yeah, I spoke before doing the math. As Don said, the math is simple. P=EI. Or,
I=P/E. So, I don't know what the KX3 input is but if we say it's 20 watts,
20/12=1.67 amps. Clearly the MFJ should handle the KX3 at full power, at least
for non-data modes. Thanks for shaking my cobwebs loose!
Looks like a happy ending to this thread. I just ordered a K3 kit and ATU kit,
and once it's in play I'll start looking at the options.
Thanks to all for the thoughtful feedback.. it's been very helpful in my
decision-making process.
Cheers and 73,
Bill
WK6A
Sent from my iPhone
I already had the small MFJ-4103 for my FT817 and at 2.89 amps it works great
so far.
Bill
WK6A
Sent from my iPhone
On Sep 14, 2012, at 5:40 PM, TG9AJR tg9...@gmail.com wrote:
Hi,
I will like to get a small footprint power supply for my KX3 when in fix
operation.
Any suggestions ?
This thread is the first I've heard of this rework eliminator. It sounds
interesting but I can't imagine that working on K2 upgrades is that daunting,
is it? Granted, I didn't build my used K2 but all I've heard is that the
process is very straightforward with Elecraft's excellent instructions.
it yours is working well?
Bill
WK6A
Sent from my iPhone
On Sep 11, 2012, at 11:14 PM, Edward R Cole kl...@acsalaska.net wrote:
From: Bill Tubbs
---snip---
In order to have a nice 100-watt Elecraft
rig I've given myself 3 choices:
1. Upgrade my K2/10 to a K2/100.
2. Sell the K2, find more
Bob,
Although I don't (yet) make use of the plethora of features in most rigs I've
had, I still want the capability just in case. for example, I own a couple if
cars that have racing heritage and can easily outperform many other in speed
and handling. But the liklihood that I'll take advantage
Looking for feedback from you K2 and K3 owners:
I'm fairly new to the Elecraft family, having bought a T1 a few years ago for
my
FT-817, then getting into the Elecraft transceivers earlier this year
(finally).
I now have a KX1, K2, and a KX3. I bought the KX1 and K2 used, but assembled
the
From: Don Wilhelm w3...@embarqmail.com
To: Bill Tubbs cgpi...@yahoo.com
Cc: elecraft@mailman.qth.net
Sent: Tue, September 11, 2012 5:07:10 PM
Subject: Re: [Elecraft] Enhanced K2 or basic K3 dilemma...
Bill,
Your answer will be couched in your operating habits
, but it also
tells
me that there is an awful lot to the K3 that I will never outgrow.
Thanks for the response!
Bill
WK6A
From: Johnny Siu vr2...@yahoo.com.hk
To: d...@w3fpr.com d...@w3fpr.com; Bill Tubbs cgpi...@yahoo.com
Cc: elecraft@mailman.qth.net elecraft
The last time I visited the FCC (in San Francisco) just before the VEC program
started, it was a nightmare. I drove a hundred miles, parked my car at a BART
(rapid transit) station, and took the RT to downtown SF, and had an unexpected
30 minute delay. I walked the four blocks to the FCC
I have a nicely completed K2, SN# 656, 10 watts, for sale.
I'm the second owner (bought this back in March) and the original builder did a
great job on it. All I've done since buying it is add the KBT2 internal battery
kit. The previous owner also installed a Yaesu main tuning knob which I
Keep pondering that KX3 tome, Fred ;-)
Bill
WK6A
Sent from my iPhone
On Aug 8, 2012, at 4:25 PM, Cady, Fred fc...@ece.montana.edu wrote:
Hi Dick,
I have not made any updates to the book other than what is on the
ke7x.com web site.
I'm pondering a 2nd edition that would include the KPA500
35, KX3 FT 12
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Tubbs
Sent: Friday, July 20, 2012 1:54 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX1 and Walkabout
I've got one more day with my KX1
I've got one more day with my KX1 in Cabo and thought I'd give the rig one more
shot before I leave tomorrow. I tried it earlier but couldn't hear a thing,
despite the relative quiet down here. On all bands (80, 40, 30,and 20).
Admittedly I'm just using a Walkabout antenna connected directly to
of a similar language developed by IBM that preceded SQL.
Enough debate there is a CW contest to going on.
73, phil, K7PEH
On May 25, 2012, at 7:46 PM, Bill Tubbs wrote:
Since I was a kid in the 60s TBD has meant To Be Developed, particularly
in the military. Never heard
Since I was a kid in the 60s TBD has meant To Be Developed, particularly in
the military. Never heard it as to be done but I suppose there are always
regional differences.
Sent from my iPhone
On May 25, 2012, at 1:40 PM, Ron D'Eau Claire r...@cobi.biz wrote:
Actually, I have for half a
I decided my kit will be shipped to me on July 5th. I figure the ramp-up on
kits will take off in about a month or so and then the numbers shipped will
rapidly escalate. I'm #151 on the kit spreadsheet so we'll see ;-)
Sent from my iPhone
I'm sort of in the middle. I ordered a product from High Sierra last year and
my shipment was mixed up with another. But it was straightened out quickly, the
charges were exactly as stated, and I received a personal apology for the
inconvenience from the owner. I'm happy with them!
Bill
WK6A
How about we enter our own estimates on when we think we'll receive our new
toys? Or maybe just add columns that automatically calculate the current
120-day estimate from the date of order?
Bill
WK6A
Sent from my iPhone
On May 6, 2012, at 10:07 PM, Jim Miller KG0KP jimmil...@stl-online.net
I heard they were waiting for a new shipment of pre-populated calendar boards.
Might be as late as March 2013 -- 120 days or so later
Bill
WK6A
Sent from my iPhone
On May 1, 2012, at 7:45 PM, Bob wb4...@gmail.com wrote:
I have it on Mayan authority that the actual end of the world is now
Don't forget, the initial shippings are built at Elecraft, and they go out as
they're built. One the kits start going out it's logical that they will go out
much more quickly
Sent from my iPhone
On Apr 29, 2012, at 10:48 AM, AB5N 7000...@gmail.com wrote:
Fred- Thanks for the laugh! Very
Wayne,
Me. No, really...me. I will suffer the painful slight of being pulled out of
the l-o-n-g waiting list and help you with this critically important project.
Bill
WK6A
Sent from my iPhone
On Apr 26, 2012, at 6:26 PM, Wayne Burdick n...@elecraft.com wrote:
Our tech writer just completed
I would also bet that the construction crew is using this sequence in order
to perfect the building sequence so that they can ensure kit builder glitches
are held to a minimum when they go out.
Bill
WK6A
Sent from my iPhone
On Apr 24, 2012, at 11:42 AM, Edward R. Cole kl...@acsalaska.net
I notice that the current version is the 1103. Think it's the same specs?
Sent from my iPhone
On Apr 10, 2012, at 2:54 AM, rck...@comcast.net wrote:
Hello Al,
I'm not sure from your post if you are looking for a receiver only or a qrp
transceiver.if receiver only, look at the eham
Thanks for the clarification, Don. I perused that page for a while but found
it hard to track all the variations and mods. Order placed, and it looks
like I'll be working on the rig next week.
73,
Bill
--
View this message in context:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I finally joined this elite group of Elecraft owners by acquiring a used KX1
a month or so ago, and a used K2 last week. My K2 has a few options already
included, but since it's an older unit (#656) and is running firmware 1.02,
I'd like to upgrade everything to make it current.
Here's what I
Wayne,
I've been lurking since I ordered the KX3 and have been watching the
interesting dialog/multilog going on re: additional/changing features on the
rig. What is the point at which Elecraft locks in all the specs. and
features for the KX3? I don't know anything about manufacturing processes
32 matches
Mail list logo