Folks - we're hitting the posting limit for this topic. To avoid overload for
other readers, lets wind it down tonight and then close the thread..
73
Eric
List Moderation, Inc.
/elecraft.com/
On 10/29/2015 2:25 PM, Jim Brown wrote:
On Thu,10/29/2015 2:13 PM, Fred Jensen wrote:
The intermitten
And with that, lets end the thread.
73,
Eric
Moderator, from time to time..
elecraft.com
_..._
> On Oct 21, 2015, at 10:01 AM, Wayne Burdick wrote:
>
> We also bear some responsibility, since the review was sent to us before
> publication. The Elecraft CSI team is still trying to figure out
Guys - Thanks for all the new ideas regarding a VHF/UHF radio :-)
Let's let the thread and for now in the interest of keeping list volume under
control.
73
Eric
Moderator etc.
/elecraft.com/
__
Elecraft mailing list
Home: http://ma
Test - Please Ignore. No reply needed.
Eric
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
Hi Jerry,
I talked to Howard about this and he wasn't trying to say it was 'programming'
in the usual software context. :-) Many of our customers refer to Macro's as
'programming' the radio, and he was just talking in that context :-)
His request for an email to K3support (which goes immedia
Hi John,
Its OK to daisy chain multiple ACC 'Y' cables. Be sure to check for possible
conflicts between your other external devices on the lines they may share.
Eric
/elecraft.com/
On 10/12/2015 8:40 AM, j...@kk9a.com wrote:
I am setting up my newly purchased K3S and I have three devices tha
While we appreciate the interest in additional forums, we can not watch them all
and only only infrequently read all the ones on Yahoo. If there end up lists for
every product we make, it will quickly be impossible for us to participate in
all of them.
If you have a question on using our produ
Hi Jim,
Drop bran...@elecraft.com an email with your K3/0, Remoterig and remotehams.com
questions. He is responsible for supporting these products, and he also happens
to be the author of remonthams.com
73,
Eric
elecraft.com
_..._
> On Oct 11, 2015, at 1:16 PM, jlbates4 wrote:
>
> I was w
We converted from Prolific to FTDI chips on the KUSB many years ago. All
current KUSBs (and KXUSBs) sold by us use the FTDI chip set.
73,
Eric
elecraft.com
_..._
> On Oct 9, 2015, at 6:43 PM, Kevin Stover wrote:
>
> Anything with an FTDI chip set.
>
>> On 10/9/2015 6:54 PM, Alfredo Velez WP3C
This thread and the 'disconnecting equipment' thread were closed earlier this
morning.
73,
Eric
Moderator
/elecraft.com/
On 10/8/2015 11:12 AM, Ignacy wrote:
I usually disconnect antennas when away but keep the power connected.
Last time going for a month-long vacation I disconnected all powe
Folks - We're exceeding the single topic short term posting limit. Lightning
protection in the shack is a recurring topic on the list and can easily be
searched for in the Nabble archives at elecraft.com/elist.html
Let's close the thread for now in the interest of relieving list email overload.
Guys - This thread has been closed. Please no political arguments like this on
the reflector. There are many other places on the net for that. :-)
73,
Eric
Moderator
/elecraft.com/
On 10/6/2015 9:13 PM, Scott Manthe wrote:
This is quickly becoming unbearable. If you guys want to have a blue st
Its up to 200 kHz in tracking mode and 100 kHz in fixed tune.
73,
Eric
elecraft.com
_..._
> On Oct 6, 2015, at 12:15 PM, Cady, Fred wrote:
>
> Hi Roger,
> At some point, I don't remember when, in the development of the
> Fixed-Spectrum - Tuned VFO display mode they had to reduce the maximu
Folks - Thread closed due to the politically oriented posting below. This is too
far OT.
As per thread guidelines, please make posts with political comments elsewhere.
73,
Eric
/elecraft.com/
On 10/6/2015 11:17 AM, jim wrote:
And the other side:
Our columnist Bret Stephens writes that at the
TX3X on the the Chesterfield Islands is rolling along with their K3s and
KPA500s.
See: www.tx3x.com
and
http://www.dxsummit.fi/#/?dx_calls=TX3X
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
We're hitting the posting limit on this one. Let's wind it down in the next 3-4
posts at most. Then thread closed for now.
Eric
/elecraft.com/
On 10/2/2015 4:32 PM, Joe Subich, W4TV wrote:
Doing so reduces any IR drop on power supply wiring by a factor of 2
or 3.
Higher voltage - 24 or 40
The SS30DV has +/- bolt terminals on the rear. The K3S is supplied with a power
cable using ring lugs for these bolts on one end, and an APP connector for the
K3S on the other.
One other note, at the 100W operating level, we do not see any significant
voltage drop across the APP conn.
73,
E
This thread was closed over 2 hours ago.
73,
Eric
/elecraft.com/
On 10/1/2015 12:18 PM, ae...@carolinaheli.com wrote:
Ouch
Please discontinue this thread. I'll keep the rest of what I want to say to
myself.
__
Elecraft mailing list
We're had a lot of posts on this topic. Ltt's let it rest for now in the
interest of relieving list email overload for others.
thread closed.
73,
Eric
/Moderator etc.
elecraft.com/
On 10/1/2015 9:58 AM, Jim Brown wrote:
On Thu,10/1/2015 8:11 AM, ae...@carolinaheli.com wrote::
Part of my
One correction to Ron's posting: The Sub Rx's KSYN3a (if you have the
sub-receiver installed) may have a blinking green status light until the sub is
actually turned on for the first time from the K3 front panel.
73,
Eric
/elecraft.com/
On 9/30/2015 8:03 AM, Ron D'Eau Claire wrote:
Anything
Folks - This is now treading into more personal comments. We're also past the
limit for single, slightly off-topic, postings. Thread closed.
Please keep it polite and respectful, as if having a pleasant get together with
friends in your living room face to face.
73,
Eric
List Moderator
/elecr
Hi Rick,
I apologize for the confusion on this. The KX3 Yahoo list was set up
independently by KX3 enthusiasts and is not one of our official lists. We do not
administer it.
Your best bet is to send a note to the KX3 Yahoo administrator via the link on
the KX3 Yahoo page.
73,
Eric
/elecra
Guys, This thread has been closed for some time.
Further OT and political posts are inappropriate and in violation of list
guidelines. Please take those discussions to another forum, or to direct email
between individuals. Not here.
73,
Eric
Moderator, COO etc.
elecraft.com
_..._
> On Sep 2
The KIO3B price will not be impacted by the price adjustments.
73,
Eric
/elecraft.com/
On 9/24/2015 4:59 PM, Johnny Siu wrote:
I want to know too because they will soon raise their prices.
73
Johnny VR2XMC
寄件人︰ Gary
收件人︰ Elecraft
傳送日期︰ 2015年09月24日 (週四) 2:43 PM
主題︰ [Elecraft] K3 Ne
Folks - this thread was closed earlier today.
73,
Eric
Moderator
/elecraft.com/
On 9/24/2015 12:16 PM, David Gilbert wrote:
I think you're grossly underestimating the disruptive cost of a move like
that. The loss of product flow (or at the very least the cost of the
redundancy involved to a
Folks - This is drifting way OT and inappropriate for this list. Thread has been
closed as per my earlier post.
Eric
/elecraft.com/
On 9/24/2015 9:25 AM, Ken K6MR wrote:
The banks are doing what they are told to do by the Central Bank. Can you say
“financial repression”?
Ken K6MR
___
Folks - Let's not drift into personal back and forths here. Thread now closed.
Eric
Moderator
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: m
Hi Gary,
Before the end of the year, once we have an excess of these three board sets in
stock. We do not want to starve regular K3S production.
73,
Eric
elecraft.com
_..._
> On Sep 23, 2015, at 11:43 PM, Gary wrote:
>
> Anyone heard of a release date for those wishing to upgrade their k3 to
Actually, wage, facility and development costs are pretty comparable at our
location to other states for our business. Our HQ and manufacturing facility
(we build all our radios here in CA) is located in a lower cost agricultural
area of the state . (Watsonville and the Salinas Valley - Steinbe
Early Alert for Elecraft list readers:
Our costs are going up as our vendors are increasing their prices to us and our
labor costs increase. Its been a continual battle to keep costs down as economic
activity has increased the last two years. We've been absorbing this, but now
we have hit the
Folks, we're drifting a little far afield. Lets close the thread at this time.
73,
Eric
List Moderator
/elecraft.com/
On 9/22/2015 2:21 PM, Jim Rogers wrote:
I suspect you may be right. It is just my personal policy to check QRZ for
address confirmation before completing any transaction with a
Folks - Thread closed in the interest of relieving others from list traffic
overload.
Note that also you can suspend delivery of individual emails in your Elecraft
list preferences screen. Then read the list via the nicely set up Nabble web
interface at elecraft.com/elist.html
73,
Eric
Modualt
Guys, this thread was closed on Friday.
Eric
Moderator
elecraft.com
_..._
> On Sep 19, 2015, at 12:37 AM, Gary wrote:
>
> Hmmm...i am told often my sending needs improvement, best I ask which foot is
> better so I can work on that one. :-)
> Gary
>
> -Original Message-
> From: "Jim
Hi William,
The enclosure was designed as an integral part of the acoustic system to
generate a desired SP3 response. Placing additional items inside the case will
distort this response.
Also, The case is totally filled with speaker 'filler' material to properly
acoustic load the driver. This
End of thread. We've well surpassed the list posting limit per hr on this one..
73,
Eric
Modulator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Folks let's close this thread. Clearly people are not self moderating when
posts exceed ten plus in a short period on a topic.
Please, take discussions off list when there are an excessive number of
postings in a short period as this one. It is not necessary to wait for me to
shut down a thread
Did you mistakenly turn on demo mode in the menu?
Eric
elecraft.com
_..._
> On Sep 16, 2015, at 5:14 PM, W5RDW wrote:
>
> Last night, I turned on my K3/KAT500/KPA500 as normal and upon CW key up, all
> the Power (W) LEDs lit up across the scale. The Fault LED was not lit. The
> VSWR was good.
I think what everyone is missing here is that Adam has clearly stated that his
tests were not designed to be tests to directly compare analog and direct
sampling radios, and certainly they were not intended by Adam for direct
comparisons to the tests run by the ARRL and Sherwood. They were origi
Guys - please keep it civil.
Eric
Moderator etc.
/elecraft.com/
On 9/15/2015 6:04 AM, Jim Bolit wrote:
Adam,
You are digging a deeper hole...
JimW6AIM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
Yes, the SP3 is made in California, as are all of our radios.
73,
Eric
/elecraft.com/
On 9/14/2015 9:02 AM, a...@sbcglobal.net wrote:
Jerry's (AE4PB) post and others suggest new speaker is actually made in the
USA. Is that true??
Mike AC5P
__
gt;
> Ted, KN1CBR
>
>>
>> --
>>
>> Message: 7
>> Date: Fri, 11 Sep 2015 18:30:48 -0700
>> From: "Eric Swartz - WA6HHQ, Elecraft"
>> To: Elecraft Reflector Reflector
>> Subject: Re: [Elecraft] K3 vs K3s..."to be or not to be an "s&quo
Let's drop the OT apple iPhone portion of this thread as its drifting a little
far afield.
73,
Eric
moderator etc. (at the ARRL Sw show selling lots of SP3s :-)
elecraft.com
_..._
> On Sep 11, 2015, at 6:17 PM, Lynn W. Taylor, WB6UUT
> wrote:
>
> Most carriers will provide a "pico-cell" at
We're exceeding the OT posting limit on this one. Let's end the thread for now.
When an OT thread hits 5-6 posts, please try to limit additional postings as
much as possible to avoid the moderator's hook.. ;-)
73,
Eric
Modulator and
/elecraft.com/
On 9/8/2015 1:42 PM, Steve Mollman via Elecr
Let's end the thread at this time in the interest of reducing list
email,overlaod for others.
73,
Eric
Mod etc.
elecraft.com
_..._
> On Sep 7, 2015, at 8:02 PM, Doug Person via Elecraft
> wrote:
>
> Very good Fred. Windows 8 was a disaster for Microsoft. Pretty much
> everyone involved w
It was officially closed yesterday..
Eric
elecraft.com
_..._
> On Sep 1, 2015, at 1:30 AM, Edward R Cole wrote:
>
> This thread is probably just about over-
>
> I ship using USPS Priority Mail almost exclusively.
> Small box = $5.25*
> Medium box = $11.30*
> Large box = $15.80*
> *If you pay
Let's end the thread for now, as it looks like its been pretty much beaten to
death. Lots of posts! Time to give the rest of our readers an email overload
break ;-)
73,
Eric
Moderator etc.
elecraft.com
_..._
> On Aug 31, 2015, at 4:36 PM, Alan wrote:
>
> I bought a mic mixer on Ebay that a
Let's end this thread at this time.
We prefer to keep the Elecraft list as our central and official gathering place
for info on all of our products. We always post here first when making new
announcements, and we also are not able to watch a multitude of different
fragmented lists 100%. We do
Lets end the thread at this time in the interest of reducing list overload for
others.
73,
Eric
List Moderator, from time to time..
elecraft.com
_..._
> On Aug 23, 2015, at 1:41 AM, aj4tf wrote:
>
> Bob,
> Crimped connections are superior to soldered connections in a high
> vibration, high
Folks - We're exceeding the list posting limit for OT posts. Lets close the
thread now in the interest of relieving list email overload for others.
Eric
List Moderator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth
The DXpedition members usually purchase the rigs after the DXpedition.
73,
Eric
elecraft.com
_..._
> On Aug 20, 2015, at 4:58 PM, Richard W. Solomon wrote:
>
> Free doesn't hurt either !!
>
> 73, Dick, W1KSZ
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.
We've now caught up with our K3S backlog (whew!) and are now shipping quickly
after order receipt.
K3S-K (kit) ships 2-5 business days after order.
K3S-F (Factory Assembled) ships 3-7 business days after order.
Thanks for all the orders and for your support!
73,
Eric
/elecraft.com/
Hi Merv,
I don't believe this changes the existing P3TXMON operation with non-Elecraft
radios.
Only if Alan detects that its a K3 when the P3 with P3TXMON is powered up will
he actually query the radio to see if its in TX. Otherwise it will act as it
does now and use detection of forward pow
Let's let the insurance threads rest for noe as we've certainly exceeded the OT
posting limit :-)
73,
Eric
List moderator
elecraft.com
_..._
> On Aug 8, 2015, at 12:57 AM, Ian White wrote:
>
> G4GNX wrote:
>>
>> Although I'm in the UK and slightly different rules may apply
> [...]
>> You r
It turns out the delay in this case is due to the particular keyboard in use as
it has a sleep mode and wakes up slowly.
73,
Eric
/elecraft.com/
On 8/6/2015 10:58 AM, ae...@carolinaheli.com wrote:
Re: High Speed CW issue with dropped characters/delay at high speeds with
K3/P3 (Jerry Moore)
S
A little too OT - Let's close the RPN and H/P calc thread for now.
73,
Eric
/elecraft.com/
/Moderator for life../
On 8/4/2015 11:25 AM, Tony Estep wrote:
On Tue, Aug 4, 2015 at 10:55 AM, Mark Bayern wrote:
... for an RPN calculator on Android there is RealCalc...
___
Folks - Let's keep it civil.
Its outside of the list guidelines to --personally criticize others posters. (it
-is- OK to argue on the merits of a posting politely.)
If you have a complaint, please send it to the list manager (me).
73,
Eric
/elecraft.com/
=
On 8/4/2015 6:08 AM, Chester Al
Folks - Let's keep it civil.
Its outside of the list guidelines to personally criticize others posters. (it
-is- OK to argue on the merits of a posting politely.)
If you have a complaint, please send it to the list manager (me).
73,
Eric
/elecraft.com/
On 8/4/2015 6:44 AM, KQ8M wrote:
What
One minor note: There are three different P3 and PX3 fix mode tuning defaults
you can select in the menu for when you tune past the edge of the display:
slide, 1/2 screen and full screen jump.
I generally prefer the slide mode as it is less jarring and drags the window
incrementally in the di
A cool new 1920x1080 high-res studio picture of the K3S with P3 available for
download.
Its perfect for use on hi-res desktop monitors for wallpaper backgrounds etc.
and can be easily resized for others. Its the same picture (but in higher res)
as the new K3S picture we have just added to our
Hi Joe - Do you have signal averaging turned on to reduce the noise floor? If
you do, it has to stop averaging when the freq is being changed while tuning,
temporarily raising the noise floor slightly. It then re-starts multi-pass
averaging once you stop tuning. This is normal for signal averagi
We are now down to 2-3 weeks on new K3S orders. (And shrinking)
As we reduce lead time we are seeing an increase inorders, so get yours in
soon! ;-)
73,
Eric
/elecraft.com/
On 7/30/2015 11:09 AM, Richard Vincent wrote:
This message is for the good folks at Elecraft. What are your lead times n
This is a Windows related bug documented by Texas Instruments on their Rev B
versions of the PCM29xx USB Sound CODEC.
TI has fixed this issue in PCM29xxC. and later revisions.
On the K3S we are using PCM2901E revision (newer than C). It does not have this
problem.
TI's Application Note about
Yes, P3 f/w v1.5 is up on the website at:
http://www.elecraft.com/software/P3/elecraft_p3_software.htm
As with all of our s/w, it is a download from the site for the P3 and is not
included with the P3TXMON kit.
73,
Eric
/elecraft.com/
On 7/29/2015 4:42 AM, W4CCS wrote:
Has the new firmware
We've started shipping the P3TXMON orders this week. Please be patient with us
as we received a very large number of orders for these the first week and will
be working through that backlog for the next several weeks.
Our sales team will be contacting each person as their order comes up for
sh
Wayne is off in one minor respect - we've shipped well more than a few dozen K3S
radios and are well into the hundreds now. :-)
73,
Eric
/elecraft.com/
On 7/27/2015 2:48 PM, Wayne Burdick wrote:
Joe W2KJ wrote:
Howdy Gang:
I wonder if anyone has received a new K3S yet??
===
Hi Joe,
We have
Not in most cases, since turning on the attenuator significantly reduces the
MDS (sensitivity) of the RX. IMDDR3 is the difference between the input RX sig
levels that created the IMD and the MDS of the RX. It may increase IMDDR3
slightly, or even reduce it, depending on which RX stages go into
Thread closed.
Folks, I am on the road right now and not able to watch the list every moment.
73,
Eric
List moderator
elecraft.com
_..._
> On Jul 17, 2015, at 5:41 PM, John Payne wrote:
>
> The whole point I was trying to make was that what started as one person
> objecting to a post becam
Our assembly house here for the P3TXMON boards has had a couple of delays on
them, some due to a parts delay and some due to capacity limitations created by
our K3S ramp up. We swapped it with several other product deliveries and expect
these boards here next week.
Eric
/elecraft.com/
On 7/15
If you have misplaced your elecraft list password, or if you never received it,
here is how to get it sent to you again.
Go to: http://mailman.qth.net/mailman/listinfo/elecraft
and scroll to the bottom of the page. Enter your email address (the one you used
for the list) and click on 'Edit Opt
When replying to emails on the list, please remember to edit down the copied
text to the minimum needed to retain context. One or two sentences from the
original post are usually sufficient. This keeps the list and archive volume
down and makes everything much more readable.
*** Don't forget t
Elecraft eMail LIST GUIDELINES 2015
For those of you who are new to the list, (and for those of us who have rapidly
failing memories) here is a quick list of things to remember when posting to
this list. Please save this for future reference.
The most important thing to remember is that this
a very interesting and pertinent thread, and I learned a
lot from it. Those that aren't interested should learn to use the delete
key. :(
On Tue, Jul 7, 2015 at 7:26 AM, Eric Swartz - WA6HHQ, Elecraft <
e...@elecraft.com> wrote:
Guys,
Time to close this thread in the interest
Guys,
Time to close this thread in the interest of reducing overload for others due
to the huge number of posts. This One is -way- over the normal list limit.
Also, there was a huge amount of over-copying of prior text in this thread. As
per our list guidelines, please delete -all- prior list f
Are you using K3 Utility to load the firmware from our site?
Eric
elecraft.com
_..._
> On Jul 5, 2015, at 6:23 AM, Alfredo Velez WP3C via Elecraft
> wrote:
>
> HI
>
> I can’t download the last firmware in the page, does anyone knows if the web
> is offline?
>
> Alfredo Velez WP3C/NP4DX
>
Later this year. We are maxed getting K3S radios out the door and also need to
focus on parts for those radios first as we ramp up.
Eric
elecraft.com
---
Sent from my iPhone 5S
> On Jun 24, 2015, at 8:14 PM, John Reilly wrote:
>
> Any idea when the KIO3B will be available for non-K3s'?
> - 7
The K3S is just beginning to ship starting today and tomorrow. It will be slow
for the first week and will then accelerate as we get them rolling in
production.
We had a very large number of K3S orders on the first several days, so we'll be
shipping those for at the next 2-3 weeks.
We will up
We've now double checked this, and we have confirmed that the KXV3 pin length
has -not- changed between the KXV3A and the KXV3B. It is not necessary to trim
the pins during installation.
Its always been a tight fit, but not too difficult, to install this board set
as an upgrade. We checked with
Of course, I meant KX3. :-)
Eric
/elecraft.com/
On 6/16/2015 12:07 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
The RX noise floor in the K3 is not likely changing in this case. If you are
using signal averaging on the PX3, the average resets each time you change
frequency. As a result the noise
The RX noise floor in the K3 is not likely changing in this case. If you are
using signal averaging on the PX3, the average resets each time you change
frequency. As a result the noise floor will be non-averaged during continuous
tuning and appear higher. Once you stop it will average over the n
Absolutely. It looks like the K3S will start flowing this week. (-Fs first,
followed by kits a week to ten days later.) As soon as that is confirmed, we'll
update the status page and post here.
73,
Eric
/elecraft.com/
On 6/15/2015 10:01 AM, Wes (N7WS) wrote:
Will the website shipping status b
Lisa just corrected me - They have everything entered and confirmed except the
P3TXMON orders. Those are going in next and will take at least through this
weekend or early next week. We had a ton of those too.
Eric
elecraft.com
On 5/27/2015 5:03 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Lisa
Lisa and her team just caught up with entering everything from Dayton today.
Whew!
Contact her at sa...@elecraft.com if you placed an order at Dayton and have not
yet received an email order confirmation.
Eric
/elecraft.com/
On 5/27/2015 3:30 PM, Ian wrote:
Got mine today.
73, Ian N8IK
--
This thread was closed yesterday.
73,
Eric
List moderator, I think!
elecraft.com
_..._
> On May 19, 2015, at 5:42 AM, Charlie T, K3ICH wrote:
>
> I remember growing up in Forestville Maryland in the 50's & 60's. Just about
> everybody left their doors open in the summer, or at least unlocked
The manufacturer is mistaken. We will contact them to correct this
misconception.
Eric
elecraft.com
_..._
> On May 19, 2015, at 2:21 AM, Frank via Elecraft
> wrote:
>
> I recall Eric mentioning an advantage to connecting the headset boom mic to
> the rear panel headphone and mic connectors
Looks like this one has now been beaten into submission..
Interesting comments, but let's let this thread rest for now in order to relieve
other list readers from email overload. :-)
Thread closed.
73,
Eric
List modulator etc.
elecraft.com
In a message dated 4/10/2015 3:06:34 P.M. US Mount
Folks - Let's not get into an argument over amp gain.
We're currently restricted by FCC rules (thought I hope that eventually goes
away..)
Let's let the thread rest for now in the interest of limiting list traffic
overload for others.
73 and have a great weekend!
Eric
elecraft.com
On 4/3/2
FCC rules specifically prohibit an easily removed or bypassed input pad for
exceeding the 15 dB gain limit.
Eric
elecraft.com
On 4/2/2015 10:30 PM, Igor Sokolov wrote:
Joe,
As I was told, they ship it with the pad at the input to meet FCC requirement
of max 15db gain. But the pad can be easi
Hi bob - Your post was far from stupid. On this reflector we welcome all
questions of this type. Please feel free to post as ask as needed. You will
certainly get a lot of responses, some closer to the mark than others. At least
one will be exactly what you are looking for.
We certainly have a
Looks like we are drifting far OT and afield of the original poster's intent.
Let's close the OT part of this thread and get it back to optimization of the
K3's AM freq response.
Also, keep snide pro/com AM comments off of this list, as that is outside of the
guidelines.
73,
Eric
List Modera
The new KSYN3a does not need the synth cal step. As noted in the manual, that
only applies to the older synthesizer.
73,
Eric
elecraft.com
_..._
> On Mar 22, 2015, at 7:39 AM, Klaus Dittrich wrote:
>
> K3 SN 8887
>
> MCU 5.14 / DSP 2.83 / FPF 1.19, 2/26/2015
> Latest Production Release
>
Hi Gerry,
Brandon will be in contact with you first thing Monday to get this worked out.
73,
Eric
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Guys - I have now closed this thread twice.
We are way past the threshold for too many posts on a single topic.
Thread closed - really!
73,
Eric
List moderator
elecraft.com
On 3/11/2015 8:05 AM, Doug Ellmore wrote:
Don,
Isn't that the nice thing about Amateur Radio, *different strokes for
di
And just in case my prior message, just sent a minute ago, is missed, this is a
copy with the 'thread closure' in the subject line.
Eric
List Moderator
elecraft.com
On 3/11/2015 6:31 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Let's close this thread at this time. We've exce
Let's close this thread at this time. We've exceed the max number of single
topic posts in a short period. I would have closed it earlier, but I actually
had to do some productive work here at Elecraft HQ this afternoon..
It is also just a renamed version of the prior thread I closed earlier th
Ok - We are now well past the posted closing time for this thread, due to the
large number of postings.
Thread is now closed.
73,
Eric
List moderator
elecraft.com
_..._
> On Mar 10, 2015, at 4:17 PM, Kevin Stover wrote:
>
> You can't see Internet spots or balance your checkbook or read the
Interesting topic, but due to the large number of posts, and in the interest of
keeping list volume reasonable for all, let's end this thread today by 2000z. (
1 PM PDT).
Also, please delete as much copied text from prior posts when replying to a
thread. 1-2 sentences is more than enough to re
The very tight temperature coefficient trim caps that are needed for the 4 band
board became unavailable.
73,
Eric
elecraft.com
On 3/6/2015 3:46 PM, Ross Primrose wrote:
Looking at the parts list, I can't imagine which part is no longer available
73, Ross N4RP
On 3/6/2015 4:37 PM, Phil W
Hi Stewart,
Lisa (sa...@elecraft.com) sent you a reply in response to your original email
inquiry. She also just sent you another email on this shortly after you posted
the email below. Have you received her latest reply?
Our replies frequently get caught inadvertently in customer spam filter
Thread closed.
In the future, if you have problem like this, please immediately give us a call.
We'll certainly help you right out.
I wasn't aware the automated reply said to email sales3 - While we do read that
daily, we'll see if we can correct that to sa...@elecraft.com
Lastly, Guys - it
Hi Wes,
Its working great.
sal...@elecraft.com is our automated web sales order confirmation send address.
If you reply to that message, we will eventually see it, but the reply from may
take up to the following day to occur, depending on when you send the email and
what our incoming order lo
501 - 600 of 2742 matches
Mail list logo
