My K3s has been in service for several years. Power output has always easily
reached roughly 100 watts.
Now, with:
1. ATU TUNE bypassed
2. Good 50 ohm dummy load
3. W1 in line with the load
4. SWR 1:1
Next:
1. With the PWR control set to show 100 watts on the LCD
It is probably necessary to restate my question with more precision.
1. I have calibrated the K3s using Elecraft K3 Utility
2. I have carefully calibrated the W1 using the DDM method with a good
quality DDM.
3. Comparing the results, I see that the W1 consistently calculates
John,
Thank you for your response.
My original K3s test setup was per the manual: good quality dummy load (not
the DL1 because of its 20 watt upper limit) with the ATU off. My high
quality dummy load does not have a test point.
After reading your results, I decided to take the DL1 as my "truth
Regarding my earlier message, I am guessing that the W1 displays peak power
"out of the box" and I am guessing that the K3 power is average power.
If the above is true, then the K3 is actually showing a higher output power
than, in fact, it is producing.
Until I know, for sure, what is being
Just before Christmas I finished building a K3s/100.
I did the transmitter gain calibration using the Elecraft K3 Utility.
This week, to satisfy my need for rosin fumes, I completed a W1. I carefully
calibrated the W1 using the DMM method (Fluke 189).
Working into a 50 ohm dummy load,
wanted to talk Elecraft with another amateur, but nobody seemed to know.
It just seemed to have appeared one day. More Elecraft MOJO?
Ed Lambert PE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
does not work as well as it did when first installed. Some relatively
simple loads will not tune below, say, 1.8 - 2.0 to 1.
Ed Lambert KD3Y
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I've been having intermittent trouble with QRZ.com all summer. One minute
here; the next, gone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
this thread, is somewhat unappealing.
I am interested further discussion on this thread in order to help me
determine whether my very limited funds go toward a K3 purchase or the
purchase of a second, but fully tricked out, K2/100.
Ed Lambert, KD3Y (K2 1999, KX1 1492
Hi Guys,
Please don't misunderstand my original question. (And thanks to all who have
contributed to an interesting discussion.)
I had been inactive for quite some time when I purchased a K2. That purchase
not only returned me to the hobby, but it also made me, probably, a lifetime
Elecraft
mess
under my desk during the contest and dumped the K2 onto a concrete floor. I
have noticed no changes in the radio's operation and have done some visual
and electrical checks and found nothing wrong. That doesn't mean, however,
that my KIO2 wasn't damaged somehow.
I welcome any ideas.
Ed
of the noise that has
provided more than half of my enjoyment.
And last, thank you to Eric and Wayne for creating such a superior set of
products and creating, in my opinion, a completely new paradigm in the
amateur community.
Ed Lambert
KD3Y
in the general thoughts of the 100 vs 500
watt option.
Ed Lambert K2 1999
KD3Y
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
outcome. He did resort to an
undo procedure.
Some airplanes with overhead panel pushbutton fire switches are guarded
mechanically to avoid hitting them with your head or shoulder when you get
out of your seat. (The fire switches cut off fuel to the engine, among other
things.)
Ed Lambert KD3Y
but am not sure if that would work properly. I would like to have
tried to contact Bob. I wasn't really dx and certainly wasn't asia but I
wonder if he's ever worked a B747 on HF cw.
Ed Lambert KD3Y
___
Elecraft mailing list
Post to: Elecraft
calibration process since it sometimes seems
to shock the system into operation. Can anyone tell me how that process
interacts with U1?
I am also curious if the collected wisdom of the reflector has seen a
similar problem and might be able to shorten my search before I start
digging into this.
Ed
Amen
Ed KD3Y
-Original Message-
From: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] On Behalf Of Goody K3NG
Sent: Wednesday, December 19, 2007 6:12 PM
To: Elecraft List
Subject: Re: [Elecraft] CB band TX? - I'm shocked!
I don't see a problem with CB transmit
Before you cancel a K3 order, please consider contacting me off reflector.
Ed Lambert, KD3Y
-Original Message-
From: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] On Behalf Of Charlotte Bob Higgins
Sent: Thursday, December 13, 2007 10:15 AM
To: Elecraft@mailman.qth.net
I note that several potential K3 owners have cancelled their orders.
Does Elecraft have a position on sale of these delivery positions to third
parties?
I, for one, would be interested.
Ed Lambert, KD3Y
KX1 1492
K2 1999
___
Elecraft
I priced the tube about 1 1/2 years ago. Contact EIMAC sales. I believe
their quote was on the order of $600 - $700.
Ed
KD3Y
-Original Message-
From: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] On Behalf Of Andy - GM0NWI
Sent: Saturday, October 20, 2007 1:20 PM
To:
Also be sure to carefully check the schematic; the one in the 2007 Handbook
contained many, many errors.
Ed
KD3Y
-Original Message-
From: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] On Behalf Of Andy - GM0NWI
Sent: Saturday, October 20, 2007 1:20 PM
To: 'Elecraft
for even having the ambition to start such an
undertaking.
Thank you, Elecraft, you are an inspiration for more than just your radios.
Ed Lambert, PE
K2 1999,
KX1 1492
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
A long time ago someone posted this tool as a great way to strip enamel from
toroid wire.
I have searched high and low for a retailer but can't find one. Apparently
Knipex does not sell direct.
Does any one know where to purchase?
Ed Lambert KD3Y
Ron N1SZW wrote:
I don't frequently comment here on the reflector
(except that we miss Nils, El Gringo Errante) but this
question warrants an on-topic aside.
Yeah, so do I!
Ed KD3Y
___
Elecraft mailing list
Post to:
The formula given in my DL1 manual is not correct, in my view. The lower the
power, the more incorrect it becomes.
Ed Lambert KD3Y
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
replies and the great majority has outputs similar to
mine. Only a few reported the higher power output. It would be interesting
to know what the prototype results were. Although, I am sure that is where
the specs originate
Ed Lambert, PE
KX1 1492
K2 1999
Subject: Re: [Elecraft] KX1
Perhaps
into it.
I will see if Kevin R can hear me this evening on 20.
Ed Lambert, KD3Y
K2 1999
KX 1 1492
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Anyone know the approval status or distribution staus of the amplifiers
shown at Dayton?
Ed Lambert KD3Y
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
Hey All,
Just got my first contact with the subject KX1. I finished it two days ago
and have been running tests since.
It was with OT1A! 14009 MHz with a really crummy inverted v. I appreciate
his ears! I have not yet installed the antenna tuner, either. My qth is Ann
Arbor, MI.
Ed Lambert
to warrant digging into the toroids (L1, L2, L3, T1)?
I am interested in the experiences of others who have been there.
(I measured the power into the Elecraft dummy load with a Fluke 189 and used
the correct formula, not the one on the dummy load instruction sheet.)
Ed Lambert, KD3Y
K2-1999
and building experience. Oh,
the Elecraft amps can be purchased assembled or in kit form. Kit form
reduces the price 400 dollars or so.
Ed Lambert, P.E.
KD3Y K2/1999 KX1/1492
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
by looking around.
I wanted to go first class, but maybe won't be able to do it. My total cost
for all new stuff would be several (4 or 5) thousands of dollars. And since
I was going to revise the handbook design, there would be no assurance of
total success.
Ed Lambert, KD3Y
I'm curious, what makes
-Original Message-
From: Ed Lambert [mailto:[EMAIL PROTECTED]
Sent: Monday, May 22, 2006 8:23 AM
To: 'N2TK, Tony'
Subject: RE: [Elecraft] Hey, you Dayton hf attendees
Yes I agree that the KPA 1500 was the hit of the show. My informal survey
showed higher traffic at the Elecraft
to antenna match but at these voltages and currents...
Ed Lambert, KD3Y
...new Elecraft amp over a tube design featuring auto tuning such as the
Acom or the Alpha (older 87A or the new 9500)?
Lou, W0FK
___
Elecraft mailing list
Post to: Elecraft
One of the Alpha customers allegedly burned down his house by performing a
stupid antenna trick. (Unmatched antenna in unfortunate proximity to his
deck)
Ed Lambert KD3Y
...but at these voltages and currents...
___
Elecraft mailing list
Post
35 matches
Mail list logo