(AGC, and other stuff as well).
This year, we'll record setting in the spreadsheet on all radios and check
for divergences.
Thanks again!
73, Jeff K8ND
-Original Message-
From: Jim N7US [mailto:j...@n7us.net]
Sent: Friday, October 16, 2015 8:28 PM
To: 'Jeff Maass K8ND'
I've seen reference to an Excel spreadsheet listing all the Config and Menu
items for the K3, but I've been unable to find a copy.
Where might such a spreadsheet be found?
73, Jeff K8ND
__
Elecraft mailing list
Home: http://mailman.
you
have what you want.
73, Don W3FPR
On 10/10/2015 7:46 PM, Jeff Maass K8ND wrote:
> G'day Don:
>
> The XG3 was on '30' to start, with the LED on solid.
>
> When I pushed/held the 'PF1' button to start the sequence, the '30' LED
3 for hamfest
demos.
73,
Don W3FPR
From: Jeff Maass K8ND [mailto:jma...@k8nd.com]
Sent: Saturday, October 10, 2015 7:20 PM
To: Elecraft Mailing List (elecraft@mailman.qth.net)
Subject: Guidance Please: XG3 Signal Source Sending CW String
I have been unsuccessful in convincing my
I have been unsuccessful in convincing my XG3 to send CW strings.
The basic signal generator functions of the XG3 are working, both with and
without the XG3 utility connected. It generates signal carrier at all
requested frequencies at all available power levels. This XG3 has firmware
revision 1.
Thanks for the quick replies!
The image is not saved when the P3 "Capture Image" button is pressed.
After complete, the user must perform "File -> Save As" to save the captured
image. Default directory is "My Pictures".
73, Jeff K8ND
> -----Orig
When 'Capture Image' is performed with the P3 Utility, where is the
resulting /bmp image stored?
I can't find it.
73, Jeff K8ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
I'm thinking about getting one before my next trip to PJ2T for CQWW 160 CW
in late January.
73, Jeff K8ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: m
> P.S. The Pelican cases are nice as are the aluminum
> sided cases but tend to call attention to 'something
> valuable is inside'. Not good for customs or potential
> thieves.
I travel to the PJ2T station with my K3 in a well-padded
Pelican 1550 case. Because I also take my laptop and many
$$ o
> -Original Message-
> From: Ken Alexander [mailto:k.alexan...@rogers.com]
> Sent: Thursday, October 29, 2009 5:00 PM
> To: elecraft@mailman.qth.net; jma...@k8nd.com
> Subject: Re: [Elecraft] CQWW SSB observations
>
> > At PJ2T, we have four permanent stations and thirteen transceivers
> Rumor has it (second hand) that some Contesters are now
> shying away from the K3 due to it's complexity, but not
> necessarily it's performance. As a relatively experienced
> owner I had no problem running what I consider to be
> excellent radio. I've owned or operated most of the
> modern ri
My electric company had a service-related power outage in my area for a few
hours this
morning, and so the DC supply for my K3 was turned off for one of the first
times in
several months.
When I powered the supply again and tried to turn on my K3, the display does
not light but
all of the gree
For those using the 1.8-KHz roofing filter for SSB in crowded band conditions,
how usable
is it? Does it require much "fine tuning" of controls when switching from a
2.8-KHz
filter, or can it be as simple as just selecting the filter?
I've used similar filters for the FT-1000MP, and had no prob
I just installed the KRX3. As instructed, I have set "SPKRS 1" in the CONFIG
menu. I do
not have an external speaker plugged in.
The problem is that there is no audio from the internal speaker. The headphone
jack on the
front panel works OK. The speaker is plugged in to the correct place (P25)
hanks again!
73, Jeff K8ND
> -Original Message-
> From: Jeff Maass [mailto:jma...@k8nd.com]
> Sent: Saturday, January 03, 2009 12:43 PM
> To: 'Ron D'Eau Claire'; 'elecraft@mailman.qth.net'
> Subject: RE: [Elecraft] KRX3 Install Problem: Extra Sta
G'day Ron:
You misunderstand my situation.
I *have* mounted the nylon standoff to the
Main DSP board as you describe.
My problem is that there was *already* a metal
standoff mounted on the Front Panel board, in
the hole that you mention as vacant, and on
which the nylon standoff rests. That st
I am in the middle of installing the KRX3 in my
K3/100 (s/n 1152), and have bumped into a "stopper".
I am at the point of re-mounting the main DSP board
to the front panel board. I find that there is a
metal standoff mounted on the front panel board near
J31 which is in the place that the new
Original Message-
> From: Jeff Maass [mailto:jma...@k8nd.com]
> Sent: Thursday, January 01, 2009 10:37 PM
> To: 'elecraft@mailman.qth.net'
> Subject: Differenced Between Filter "KFL3A-2.8_2.7sw" and
> "KFL3A-2.8K"?
>
>
> I was planning to
I was planning to take a block of hours tomorrow to add the KRX3 to my K3/100.
One of the things to do is to replace the 2.7-KHz filter with the 8-pole
2.8-KHz filter in
the main receiver. I have one "KFL3A-2.8K" that I ordered a while ago for this
purpose.
Now I see from the Elecraft order
filter! Email has been
sent to
Elecraft for an exchange ASAP.
73, Jeff K8ND
> -Original Message-
> From: Jeff Maass [mailto:jma...@k8nd.com]
> Sent: Thursday, January 01, 2009 3:54 PM
> To: 'elecraft@mailman.qth.net'
> Subject: KRX3 Inventory Question: "F
I have just inventoried my KRX3 box preparatory to
installing it into the K3.
All the items on the inventory appear to be as needed,
except in the D850334 "KRX3 Hardware Bag".
I do not have anything labeled E850324, "Foam Pads".
>From the photo, this appears to include two foam
strips.
What I
er Heil Microphone Adapter?
>
> Jeff,
>
> Use the Kenwood adapter - or plug the headset directly into
> the rear panel jacks.
>
> 73,
> Don W3FPR
>
> Jeff Maass wrote:
> > I have three Heil headsets, each with the HC4 element.
> These are *not* the Icom &qu
I have three Heil headsets, each with the HC4 element. These are *not* the Icom
"iC"
versions.
Which is the correct Heil adapter for the front panel connector? Kenwood?
I've been sorting through the archives, and have not found a clear answer.
73, Jeff K8ND
_
I'm afraid that carrying the K3 as carry-on is not going to be practical, since
I already
have my two items (carry-on and personal item) planned. One is $13K of camera
and lenses,
and the other is my laptop and supporting photography hardware. This laptop
workstation
cost more than the cost of
I'm looking for recommendations for a small padded case for a K3, which could
in turn be
placed into checked luggage. I'd like something not much larger than the radio
itself,
with space for the radio alone.
What have others found that will protect a K3 during transportation?
73,
Thanks, Howard!
73,
Jeff Maass K8ND
Station Manager PJ2T,
Caribbean Contesting Consortium
CCC Web Site: http://www.pj2t.org <http://www.pj2t.org/>
PJ2T Slide Show: http://www.k8nd.com/Radio/DELARA_PPT2.pdf
Curacao Critters: http://www.CuracaoCritters.com
<http://www.curacaocri
Please continue to post when your backordered KRX3 (2nd receiver) arrives,
along with your
order date and/or K3 serial number associated with the order!
I was hoping to have the KRX3 in my K3 (#1152, ordered 2/7/08) in time to take
it with me
for use at PJ2T for the CQWW CW Contest, but as best
K3/100 (Kit), s/n 1152
Ordered: 2/7/08
Katiegram: 6/19/08
Delivered: 6/25/08 (4 months 2 weeks)
Backordered: KRX3 2nd RX (and three filters
for that receiver)
KFL3A-2.8K 8-pole filters (2)
73,
Jeff K8ND
Powell OH
___
28 matches
Mail list logo