Re: [Elecraft] Elecraft repair

Wilcox Engineering in Pennsylvania. I sent my K3s to him and it was back to me in about a week and a half. He did a great job and his pricing was very fair. Good luck, 73 de Jim - KE8G On Fri, Jul 15, 2022 at 11:15 wrote: > This is not a slam against Elecraft repair but I have a need

Re: [Elecraft] Shipping via UPS - A Lesson Learned the Hard Way

Very easy go into your email settings and write a rule that if an email comes in containing "UPS" is it sent to the Trash basket. 73 de JIm - KE8G On Tue, Apr 12, 2022 at 9:04 AM Julia Tuttle wrote: > Y'all, nobody was calling for the thread to stop. They were litera

Re: [Elecraft] K Line: Signal loss in a QSO

Hmm, I’ve never heard that 5 or 50 watts of power shouldn’t be run. 73 de KE8G - Jim On Sat, Jan 15, 2022 at 18:54 Dave (NK7Z) wrote: > If I remember correctly, 5 watts is a power level to avoid... As is 50 > Watts. I believe it messes with the TX calibration. > > 73, and th

Re: [Elecraft] K Line: Signal loss in a QSO

Back the power off below the 12 watts, and see if you get anything. Same thing had happened to me today, so running K3s at 5 watts, and the Kpa500 is putting out 80-90wstts 73 de KE8G - Jim On Sat, Jan 15, 2022 at 13:04 Ronnie Hull wrote: > I had the exact same problem! It’s been Elecraft

Re: [Elecraft] Parts swappers -- is this a real "thing"

meone, then how can he be trusted?!? As others have said, it's a copout way of saying the seller doesn't want to be bothered with returns. YMMV. 73 de Jim - KE8G On Sat, Oct 30, 2021 at 3:17 PM jerry wrote: > This is of real concern to me. I have an accumulation of ham equipment, >

Re: [Elecraft] Copying CW and Pitch

ating them decreased. I finally stopped at 700 Hz, as I was convinced that my hearing had changed and the lower frequency was definitely better for my ears. 73 de Jim - KE8G On Sun, Mar 14, 2021 at 7:13 PM Chris R. NW6V wrote: > On Sat, Mar 13, 2021 at 5:45 PM Jim Brown > wrote: > >

Re: [Elecraft] K3S CW Optimization

and how to use it. It has many good pointers and lots of valuable information. I believe PDF formats are still available on LuLu publishing. I hope that helps a little. 73 de Jim - KE8G On Thu, Feb 11, 2021 at 5:25 PM MaverickNH wrote: > Apologies, as I'm sure this has been addressed before.

Re: [Elecraft] KE7X Website

Guys, what needs to be done? If the information is still on the servers and all that is needed is money to host it and domain fees, let's start a collection and keep it going. 73 de Jim - KE8G On Wed, Jan 6, 2021 at 9:56 PM wrote: > Hello Tony - > > > > I don't

Re: [Elecraft] Directional Coupler/Panadapter TX Sensor Question

It's the 2Kw version On Mon, Oct 26, 2020 at 10:30 AM Charles Tropp wrote: > Hi Jim, > What power level? 200W or 2K? > > On Mon, Oct 26, 2020 at 10:06 AM KE8G wrote: > >> Hi All, >> I have a Elecraft Directional Coupler/Panadapter TX Sensor that I never >

[Elecraft] Directional Coupler/Panadapter TX Sensor Question

since then it's been boxed. Any idea of what it would bring, if offered, for sale? Thanks in advance. 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfa

Re: [Elecraft] KPA500 Main Power - ON 24/7/365?

cted to an Astron RS-35M, which is on a dedicated line, surge protector and battery backup. As Tony, N2TK, stated, they need to be powered on if wanting to run remotely. 73 de Jim - KE8G On Tue, Oct 20, 2020 at 8:27 AM N2TK via Elecraft wrote: > Hi John, > Both my KPA500 and KPA1500 are o

Re: [Elecraft] K3S VFO A & B encoder shaft diameter

Hi Dan, Thank you very much! Not able to measure it, as I am at my Texas home and the radio is at my Ohio home. 73 de Jim - KE8G On Wed, Jul 1, 2020 at 3:44 PM Don Wilhelm wrote: > The encoder shaft is 1/4 inch. > > 73, > Don W3FPR > > On 7/1/2020 3:18 PM, KE8G wrote: >

[Elecraft] K3S VFO A & B encoder shaft diameter

Hi All, I have gone through the manual for a K3 & K3s but can't find the diameter of the VFO's encoder shafts. Please advise. Thanks in advance, Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/lis

Re: [Elecraft] Repair

Hell, we ran out of that a long time ago in the Houston, TX area! 73 de Jim - KE8G On Fri, Mar 20, 2020, 12:38 PM donw4cbs wrote: > We're out of blinker fluid in Florida. Don, W4CBS Sent from my Sprint > Samsung G

Re: [Elecraft] Operating from a retirement home

haven't had any for the last 10 years!! 73 de Jim - KE8G On Tue, Dec 17, 2019 at 5:51 AM David Wilcox via Elecraft < elecraft@mailman.qth.net> wrote: > Ha! That's a good one. And so true. > > David J. Wilcox K8WPE’s iPad > > > On Dec 17, 2019, at 5:27 AM, WW3S

Re: [Elecraft] K3 RIT & OFFSET ENGAGES AT RANDOM

experiencing the same problem. 73 de Jim - KE8G On Mon, Dec 9, 2019 at 6:43 AM Bill Weaver wrote: > > > Are you using N1MM? I had the same thing happen for about a 10 minute > period during the contest and clicked a few fields on N1MM related to RIT > and it stopped. I meant to go

Re: [Elecraft] Tinnitus and the K3 RX EQ and Related Variables

Yep, Costco for hearing aids is the best. My wife has had them for years, and we are going there today for "tune up". Always great service, and with our back and forth to Texas, we always have a Costco for follow up, if needed. 73 de Jim - KE8G On Thu, Mar 28, 2019 at 9:18 AM R

Re: [Elecraft] [Elecraft-K3] K3s won't connect to PC

tervention, as I did a lot of praying for it to be something simple! Things are working as normal, and a "boat load" of toroids are on the way!! Thanks again. 73 de Jim - KE8G On Sat, Mar 23, 2019 at 6:32 PM Don Wilhelm wrote: > Checking communications capability with K3 Utility i

Re: [Elecraft] Problem with new KAT500

mbo for quite a few years. 73 de Jim - KE8G On Sun, Mar 24, 2019 at 3:34 PM wrote: > I just received a new factory built KAT500 a few days ago. > > I am using it with my K3 and KPA500 cabled with (2) E850463 Aux interface > cables as in Figure 1 on page 5 of the KAT500 manual. > &

Re: [Elecraft] [Elecraft-K3] K3s won't connect to PC

e I'll be sending the K3s to Elecraft for repairs. I will call them on Monday. 73 de Jim - KE8G On Sat, Mar 23, 2019 at 12:37 PM wrote: > Don, > Using the K3 Utility is good advice. > Yesterday for some reason when I had updated WIN10, the one port changed > numbers. And of al

[Elecraft] K3S Sub Receiver stopped working - Now Fixed

Hi All, I created a new email and changed the subject line to reflect the fact that I now have the sub receiver functioning perfectly. It turns out to be an error with the seating of the pins on the board. Thanks for all the suggestions, 73 de Jim - KE8G

[Elecraft] K3S Sub Receiver stopped working

noise. When the sub receiver is engaged, I can hear sounds in the left ear when pushing any buttons on the radio. I am somewhat stumped, as I was very diligent in disassembly and then re-assembling it. Using most current firmware, 5.66. Please advise. 73 de Jim - KE8G

Re: [Elecraft] Win4K3Suite ?

Hi Bob, I've been using the Win4K3Suite for several years now, for controlling the K3S remotely. and it functions perfectly. Support of this software is fantastic! 73 de Jim - KE8G On Sun, Mar 17, 2019 at 9:26 AM Bob Conder via Elecraft < elecraft@mailman.qth.net> wrote: >

[Elecraft] Filter Trade

one for the sub receiver. I am looking for someone on the list that has a KFLA-250 Hz in excess to their needs that they would like to trade. Please let me know. Thanks in advance, 73 de Jim - KE8G __ Elecraft mailing list Home: http

Re: [Elecraft] KPA500 Fan Control

ead, I use RadioSport headphones, and with them on, the fans could be doing a screaming banshee song and I never hear a thing. Your mileage may vary, just my observations over a several year period. 73 de Jim - KE8G http://www.avg.com/email-signature?utm_medium=email&utm_source=link&am

[Elecraft] K3s audio question

running or nothing other than Skype and the radio on, the moment I hit a key, the audio is muted momentarily! Any suggestions on a remedy would be greatly appreciated. 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.n

[Elecraft] Elecraft K3/100 - sold

Hi All, The K3 has been sold. Thanks for the inquiries. 73 de Jim - KE8G CWops #1616 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] K3/100 for sale - Price reduced

factory specifications.” I am asking $2,400 including shipping and insurance. I can provide additional photos upon request. Contact me via KE8G dot Jim at gmail dot com or my cell phone at 440-212-3623 73 de Jim - KE8G __ Elecraft

[Elecraft] K3 Serial #5946 has been sold

Operation Manual” 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

[Elecraft] Two K3/100 radios for sale

Hi All, I now have new K3S radios, so I am getting rid of my K3 radios. Serial # 4401 K3/100-F K3 100wW Transceiver – Factory Assembled KAT3 K3 ATU Modular Kit KXV3V RX Antenna, IF OUT and Xverter Interface KFL3A-2.7 2.7 kHz SSB Filter KFL3A-1000 1000 Hz 8 P

Re: [Elecraft] Test

Ok, great! Thanks for all the replies. 73 de Jim - KE8G On Tue, Sep 11, 2018 at 2:47 PM Michael Walker wrote: > The idiot in me wants to say no. LOL > > Obviously, it is working fine! 73 > > On Tue, Sep 11, 2018 at 2:37 PM, KE8G wrote: > >> Are my emails making it

[Elecraft] Test

Are my emails making it to the list? 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

Re: [Elecraft] K3S goes Keydown

Hi Dale, Sounds like RF is getting in somewhere, somehow! Have you noticed if it's band specific? Frequency specific? This happens to me once in a while, and then mysteriously disappears! 73 de Jim - KE8G Sent from my iPad > On Feb 3, 2017, at 9:18 AM, Dale Martin wrote: >

Re: [Elecraft] Help with remote side tone setup

George, That did the trick! Thanks for helping me out. 73 de Jim - KE8G Sent from my iPad > On Dec 3, 2016, at 8:14 PM, George Kidder wrote: > > The following answered my similar question: The version I received was 5.53, > and the monitor tone is back. > > George, W3

[Elecraft] Help with remote side tone setup

I contact this group. Thanks in advance, 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: h

Re: [Elecraft] K3S master power?

Doesn't that present a problem? I thought the KAT500 was supposed to be powered up before turning on the K3, or has that somehow been changed and I am stuck in the past? 73 de Jim - KE8G Sent from my iPad > On Jun 18, 2016, at 7:15 PM, Cady, Fred wrote: > > > I use a rig

Re: [Elecraft] Elecraft Website

Working fine in Ohio... win7 64 bit with Chrome! David Koch wrote: > Just in case we haven't got Texas on the list, I am also using FIOS and > just checked with a couple different browsers and am also unable to > access the Elecraft web site. > > 73, Dave, W8OV > > > On 2015-12-31 14:

Re: [Elecraft] Compatability of K3 EZ and the K3s

Hi John, Yes, I use the K3_EZ V2005 with Win7, 64 bit and it works perfectly fine. 73 de Jim - KE8G johnpierce wrote: > Has anyone used the K3 EZ software on a windows computer with the K3s? Is > it compatible? > > >

Re: [Elecraft] K3 EZ

Hi John, It makes it very easy to adjust/tweak settings in the K3, rather than using the buttons on the radio itself. 73 de Jim - KE8G johnpierce wrote: > I am new to Elecraft and have a K3s. What are the advantages of K3 EZ? > > > > &

Re: [Elecraft] OT looking for K3EZ utility

Hi Jeff, If you have a 2008 version, yours is much newer than mine. My version is 2005 and it works fine for my needs... BUT, if you could send me a copy of your version, I would appreciate it. 73 de Jim - KE8G Jeff Schmidt wrote: > Jim, > > Is v2008 the last version that yo

Re: [Elecraft] OT looking for K3EZ utility

I just sent Kjeld directly a .zip file containing the needed files. 73 de Jim - KE8G Barry N1EU wrote: > I don't think it's available any longer. Perhaps someone has a copy > of the install files they can make available? > > Thanks & 73, > Barry N1EU >

Re: [Elecraft] kpa500 doesnt follow k3

levels at the K3: one to drive the KPA500 when it is in OPER mode and another for pass-through transmitting when the KPA500 is in STBY. The K3 will automatically furnish your preset power levels as you switch the KPA500 between OPER and STBY. 73 de Jim - KE8G Chortek Bob via Elecraft

Re: [Elecraft] Elecraft Hex Key Serial # 57

I, too, am a pretty heavy handed cw buff and have found that you can use a piece shelf liner, the kind my XYL uses in the kitchen cabinets & drawers. Works fantastic. Besides, it cleans up easily from any coffee spills! 73 de Jim - KE8G Chortek Bob via Elecraft wrote: > I found

Re: [Elecraft] USB-to-Serial cable - Follow-up

10 seconds to go out on the Internet and find/install the needed driver. Very curious with the difference between Win8 and Win7 Internet search results! Thanks again, 73 de Jim - KE8G Jim - KE8G wrote: > Hi All, > I received a couple of cable from Elecraft today, and I am not havi

Re: [Elecraft] USB-to-Serial cable

a straight RS232 cable with my desktop that I built which has 4 serial ports. Thanks again, Jim - KE8G hsherriff wrote: > Jim You should be able to get the drivers from the download section of the Elecraft site Harlan  NC3C Sent from my Verizon Wireless 4G LTE smartphone

[Elecraft] USB-to-Serial cable

Hi All, I received a couple of cable from Elecraft today, and I am not having any luck getting them to work. I go into the device manager and it says a driver has not been installed. I tell it to update the driver, it goes out to the Internet, but returns nothing. Any ideas? Right now, I am

Re: [Elecraft] K3/0 mini remoting problem

Great!Happy to hear it was such an easy fix! 73 de Jim - KE8G Sent from my iPad > On Oct 3, 2014, at 11:25 PM, "bwru...@gmail.com" wrote: > > Wow! Just unplugged and replugged all the RS232 lines, and it works! > > Thanks for the help--- I am very pleased wi

Re: [Elecraft] Remote operation question

Hi Mitch, Yes, good idea! I am also going to call Elecraft and speak with Brandon. I tried that yesterday, but he had the day off. As of now, firmware in both K3's are the same, firmware in both RemoteRig units is the same. So, we will go from there. thanks, 73 de Jim - KE8G &

Re: [Elecraft] Remote operation question

Okay, I have now updated the RemoteRig firmware at both the remote and control sites. KE8G wrote: > Well, the unfortunate part is that the only description I got was the radio > sounded like it has a defect, nothing more and the fellow was gone. If > someone would like to set

Re: [Elecraft] Remote operation question

I now see I have an error message on the remote side: Saved error message: Data Abort at 0x00043114, called by 0x000437ac Any ideas? KE8G wrote: > Well, the unfortunate part is that the only description I got was the radio > sounded like it has a defect, nothing more and the fell

Re: [Elecraft] Remote operation question

installed two months ago. I will update the RemoteRig firmware at both sites and see if that changes anything. Thanks all for you comments! 73 de Jim - KE8G Sent from my iPad > On Aug 4, 2014, at 11:05 PM, Mike va3mw wrote: > > What is the actual problem? Defect doesn't r

[Elecraft] Remote operation question

problem? I had a person tell me the rig sounds like it has a "defect." Looking at things from the control end, the KAT500 & KPA500 both appear fine, no changes in SWR or power output. Any ideas? 73 de Jim - KE8G __ El

Re: [Elecraft] FS: K3/!00 with options

Looking at your 4 ads, you do not list any serial numbers; inquiring minds would like to know. 73 de Jim - KE8G Sent from my iPad > On Jul 28, 2014, at 10:36 AM, Doug Person via Elecraft > wrote: > > Selling my Elecraft K3/100. Excellent condition. Includes KXV3A, KAT3, >

Re: [Elecraft] K3 strange power surging behavior

ave no vested interest in Elecraft, but truly believe there is no better product on the market. 73 de Jim - KE8G Sent from my iPad > On Jul 8, 2014, at 12:13 AM, Raymond Bass wrote: > > I've been thinking about getting the K3, P3 and the amp but with all these > problems I keep

Re: [Elecraft] P3 Questions

Hi Steve, Yes, the P3 is a great tool to use in both contesting and dxing. It also tells a lot about what is going on with the band. Please follow this link to familiarize yourself with the P3: http://www.elecraft.com/manual/P3%20Owner's%20man%20Rev%20D.pdf 73 de Jim - KE8G "S

Re: [Elecraft] KPA500 question 2 - remote power control

down about midway to the Remote Software. http://www.elecraft.com/k2_remote.htm I control the software via Chrome Remote desktop and it will power on & off all day long without missing a beat. Question, why are you concerned with turning off all the AC to the amp? 73 de Jim - KE8G

Re: [Elecraft] P3 Question - start up

I was able to answer my own question. I was able to use a macro to change the center freq position. My reasoning for wanting to do this is to be able to remotely use the P3. 73 de Jim - KE8G Jim - KE8G wrote: > Hi All, > I would like to know if there is a way, when starting up

[Elecraft] P3 Question - start up

Hi All, I would like to know if there is a way, when starting up the P3, to have the VFO A marker show up all the way to the left of the screen? Every time I move it to the left, shut it down, then turn it back on, it centers itself. Thanks in advance, Jim - KE8G

Re: [Elecraft] K3 Remote - Latency

Hi Brian, I can't really comment to the K3/0, but I can tell you when running a K3 as both the remote and control rigs, there is not a problem at all. To me, it is just as if I am sitting in front of the remote station, performing all ops from there! 73 de Jim - KE8G Sent from my iPad

Re: [Elecraft] OT: ECore LMR400

Hi George I don't have any experience with this particular one, but can highly recommend the LMR400 cable from DXEngineering. I am currently using it at the home QTH and plan on buying a 500ft spool, as soon a I return to replace all coax runs with it. 73 de Jim - KE8G Sent from my

Re: [Elecraft] Would anyone like to see an all-mode VHF/UHF offering from Elecraft?

Hi All, As for me, I say no. I would rather have the folks at Elecraft invest their talents and time, in making the continued improvements in the K3, P3, KPA500 & KAT500. Just my .02 worth! 73 de Jim - KE8G Sent from my iPad > On Jan 31, 2014, at 10:37 AM, Tom wrote: > > No

[Elecraft] K3/RemoteRig - external speaker

Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

Re: [Elecraft] K3 & RemoteRig

quite a bit in speed. As I said, I miss the ability to have that visual, as when just using the K3 without the RemoteRig. 73 de Jim - KE8G iain macdonnell - N6ML wrote: > On Fri, Nov 22, 2013 at 10:08 AM, Jim - KE8G wrote: > > Hello All, > > I have a question for those of y

[Elecraft] K3 & RemoteRig

here something within the RemoteRig software, that I just can't find? I really like the ability of the visual on the K3 when changing the WPM speeds, that I miss not having it available to me. Any ideas? 73 de Jim - KE8G __ Elecraf

Re: [Elecraft] Reliable DC Power Supply for K3/P3

.2 cents. 73 de Jim - KE8G Robert Nobis wrote: > I m about ready to place an order for a K3 and P3, and wonder if there are > recommendations on a reliable DC power supply for the Elecraft 100-W > transceiver. > > 73, &g

[Elecraft] KPA500 Remote control problem & question

amp. Any ideas that I can do via the Internet? Thanks in advance, 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth

Re: [Elecraft] K3 Internal Keyer and Serial Contest QSO Numbers

suggest due diligence on your part, to make sure you come up with the way that will suit your needs the best. Take your time and investigate all avenues. 73 de Jim - KE8G "Dauer wrote: > New K3 - still learning about it. Apparently the internal keyer cannot do > serial inc

Re: [Elecraft] k3 remote and uverse

, I can not tell the difference. If you do go this route and run into any set up problems, give Elecraft a call and ask for Brendan. Brendan is a RemoteRig genius and he can walk you through any problem. 73 de Jim - KE8G Buddy Spiegel wrote: > I am thinking of adding the k3 rem

Re: [Elecraft] K3 Roofing filters

ich also gives you the opportunity to learn a little more on the workings of the K3. As far as SSB, I can't comment, as I do not even own any microphones! One thing for sure, you will be a very happy CW operator once you learn your way around the K3... it is a fantastic radio! 73 de Jim

Re: [Elecraft] Elecraft's HexKey

The Mercury is going for $525!!! 73 de JIm - KE8G Michael Babineau wrote: > Yikes ! It is very a nice paddle (I have the Elecraft model) but I am not > sure I would pay $325 for it, $220 sounds ok. > I guess Bencher raised their prices recently .. I am almost afraid to ch

Re: [Elecraft] Elecraft's HexKey

That is correct, but the cost is $325, as compared to HRO's price of $220; including free shipping. 73 de Jim - KE8G Michael Babineau wrote: > You can still get the same key, but with a Bencher logo, directly from > Bencher. > > Michael VE3WMB > >

Re: [Elecraft] Elecraft's HexKey

e one set across the country! I found that the place with a decent price is HRO... $220 with free shipping. 73 de Jim - KE8G Greg Bohning At Gmail wrote: > Is the special edition HexKey still available ? > > Regards , > Greg W6atb > > Via iPhone > C

Re: [Elecraft] K3 and wireless intruder alarm

My alarm system uses a combination of wires, for the doors, and wireless for all windows and motion detectors. I usually run the K3 with the KPA500 at around 450-500 watts and have no problems whatsoever! 73 de Jim - KE8G David Christ wrote: > Both I and K0CF have wireless h

Re: [Elecraft] Re; Elecraft magnetic Hex Key

Hi All, Well, it appears, as usual, I am a "day late & a dollar short" on this item! My thanks to all who have responded. 73 de Jim - KE8G Howard Stephenson wrote: > Jim, > > The Elecraft Hex Key was discontinued about 4 months ago

[Elecraft] Elecraft magnetic Hex Key

Hi All, I am curious, is Elecraft still selling the magnetic hex key with their name on it? I looked on the web site's product page, but can not seem to find it. Any ideas? 73 de Jim - KE8G __ Elecraft mailing list Home:

[Elecraft] Outstanding service

l pleasure. >From the bottom of my heart, THANK YOU Brandon.. I really appreciate all you have done! 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/m

Re: [Elecraft] Menus

surely do not remember all the menu settings! My suggestion would be to take a look at how you are going to operate the radio and go from there. There's nothing to be scared of, as you are not going to hurt the radio. 73 de Jim - KE8G Richard W Hemingway wrote: > Hello again

Re: [Elecraft] Trouble with Auto-Spot (K3)

Hi Paul, Just curious, what firmware version are you using? Is it the newest one? There was a problem a while back, but the latest version(s) have fixed that. 73 de Jim - KE8G -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf

Re: [Elecraft] KAT500 shipping time?

!!! Great job by the Elecraft folks Happy New Year and keep up the great work and new products in 2013. 73 de Jim - KE8G -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Randy Sent: Monday, December 31, 2012 10:03 AM To

Re: [Elecraft] KAT500??

Wayne, I, for one, would rather wait and know I am getting the best that Elecraft can offer; design, component, & price wise. I've seen too many jobs/products rushed into to meet the market demand, only to have problems down the road and end up doing a re-design. 73 de Jim - KE8G

Re: [Elecraft] operating software for K-3

John, Congrats on the new K3! Check out DXLab on the Internet. It's a suite of some great programs for us hams. Best part of it , it's free and very well supported by the author and reflector group. 73 de Jim - KE8G wa2cj...@optonline.net wrote: > I have completed

[Elecraft] WTB KFL3A-400, 400Hz, 8 pole filter

Hi All, I just purchased another K3 from an individual and I'm looking for the 400Hz, 8 pole filter. If you have one and no longer have a need for it, please contact me off line; KE8G at cox dot net. If I don't hear from anyone in the next week or so, I'll order it directly

Re: [Elecraft] K3 CW filters advice

h as they are, to forget the 250Hz and go with the 200Hz. Personally, I chose the 250Hz because it is a 8-pole filter and the 200Hz is a 5-pole. Good luck in your purchase, you will not be sorry choosing a K3! 73 de Jim - KE8G -Original Message- From: elecraft-boun...@mailman.qth.net [ma

[Elecraft] P3SVGA adaptor documentation/manual availability

Hi All, I am curious if anyone has seen or heard of any available documentation or an owner's manual being available? Or installation instructions? I'd like to have them on hand and look at before my new toy arrives. 73 de

[Elecraft] KX-3 down P3 adaptor up next!

KE8G/KD8CMB station will be complete (until the next Elecraft offering!) Thanks for all the hard work & new options you and your crew offer us. Happy Holidays. 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth

Re: [Elecraft] P3 info ?

reflector has a lot of information on the P3. 73 de Jim - KE8G Bill Conkling wrote: > Order it! > > ...bill nr4c > > -Original Message- > From: Gordan Hribar [mailto:t93x_gor...@yahoo.com] > Sent: Saturday, November 05, 2011 4:55 PM > To: elecraft@m

[Elecraft] KPA500 on its way!

ease hurry with this one, my eyes aren't getting any younger!!! 73 de Jim - KE8G __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth

Re: [Elecraft] P3 Video Output (Was [K3]_[KRC2]_Is_there_a_KRC3_in_the_w orks?)

Question... how will the resolution selection be controlled? Through P3 firmware? Looking forward to this addition... the eyes aren't getting any younger! 73 de Jim - KE8G Alan Bloom wrote: > The plan is: 1024x768, 1280x1024 and 1920x1080. > > Alan N1AL > > >

Re: [Elecraft] P3 - to be or not to be - that is the question

Thanks for the correction on powering off the P3, learned something new! 73 de Jim - KE8G - Original Message - From: "Ron D'Eau Claire" To: ; "'Mike Fatchett W0MU'" ; Sent: Friday, August 26, 2011 3:21 PM Subject: Re: [Elecraft] P3 - to be or not

Re: [Elecraft] P3 - to be or not to be - that is the question

73 de Jim - KE8G Mike Fatchett W0MU wrote: > The holes are for future expansion and not much has been said about > those. I love the P3. It is great for finding holes in DX Pileups, > knowing if a band is open etc. I think you can update the K3 with the > P3 connected. >

Re: [Elecraft] K3 S meter oddities

Gents, I am NOT seeing this behavior on my K3/100, SN 4401 w/4.39 firmware installed (just this past weekend.) As best as I can recollect, it has never changed when plugging in the headphones. 73 de Jim - KE8G - Original Message - From: "Phillip Shepard" To: "Bruce B

Re: [Elecraft] Headphones

er than the time trying them. Okay, enough said on this subject. Have a nice weekend. 73 de Jim - KE8G Flame proof suit off! - Original Message - From: "Barry Simpson" To: "Bill Ross" Cc: Sent: Saturday, July 09, 2011 8:33 PM Subject: Re: [Elecraft] Headphones H

Re: [Elecraft] KE7X K3 Book 20% saving

Yes, 288 + single sided pages would be terrible! Fortunately, I was able to print mine out double sided and it fits into a hardcover binder with no problem. 73 de Jim - KE8g Doug Turnbull wrote: > Craig, > The printed version is nice in that with double sided printing and a

Re: [Elecraft] KE7X K3 Book 20% saving

I downloaded the PDF, makes for fast searching. I also printed it out to make a looseleaf binder. I now have the best of both worlds! 73 de Jim - KE8G - Original Message - From: "Phil Hystad" To: "Bill W4ZV" Cc: Sent: Saturday, June 25, 2011 10:37 AM Subject:

Re: [Elecraft] Fred KE7X

hat I may need to in the future. 73 de Jim - KE8G Phil LaMarche wrote: > Received the manual today. Absolutely beautiful and well done. So happy I > didn't do the download. Thank you Fred for the professional work and > contribution. > > > > P

Re: [Elecraft] Seeking external speaker recommendations

stic. It has 4 selectable audio filters. Best of luck with your search. 73 Jim - KE8G "George A. Thornton" wrote: > I am looking for recommendations on external speakers for the K3. I am > primarily interested in voice modes. > > I would use these primarily in my

Re: [Elecraft] K3 Internal Keyer vs. Straight Key

All, Thanks for the information! This is what I was hoping for; to be able to have both plugged in and choose between which to use. Thanks again, Jim - KE8G 73 - Original Message - From: "Bill Conkling" To: Sent: Sunday, September 05, 2010 11:37 PM Subject: Re: [El

[Elecraft] K3 Internal Keyer vs. Straight Key

and one marked key. I believe that is for a straight key/PC, etc. How do I turn off the internal keyer? Or, can I keep the paddles connected (use when desired), plug the cable in the "key" input and use the software & PC? Have both connected at the same time? Thanks in advance,