acquainted with the K3 at
VP6DX.
As stated; the wait was worth it.
73 de Milt, N5IA
-Original Message-
From: Ray Sills
Sent: Tuesday, June 07, 2016 7:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Shipping of KX2's
Amen to that! I put my order in within hours
This is an open invitation to Joe, W4TV, to contact me. I have been unable
to get a response from you Joe, for the past 4 months, by sending direct
E-mails.
Please contact me. Thank you.
Milt, N5IA
-Original Message-
From: Joe Subich, W4TV
Sent: Tuesday, March 08, 2016 7:17 AM
are doing when they use K as
the only indicator of HP operation.
Mis does centavos, de Milt, N5IA
-Original Message-
From: Chester Alderman
Sent: Sunday, February 21, 2016 10:00 PM
To: 'Mike Rhodes'
Cc: 'Elecraft Reflector'
Subject: Re: [Elecraft] OT: CW Contest logging question
.
Perhaps someone smarter than me can figure it out. BUT, I am sure the
problem is with the AC0C receiver and NOT our K3 transmitters.
73 to all de Milt, N5IA
AC0C KY7M 1864.7CW CQ [LoTW] 21 dB26 wpm0416z 02 Feb
W4KKN KY7M 1820.6CW CQ [LoTW] 25 dB25 wpm
And thank you, Sir, for the superb service.
73 de Milt, N5IA
-Original Message-
From: Wayne Burdick
Sent: Tuesday, December 22, 2015 10:59 PM
To: Milt -- N5IA
Cc: elecraft
Subject: Re: [Elecraft] K3 sub RX off freq in SSB diversity mode
Glad to hear it, Milt.
73 & Happy Holi
in
diversity mode.
Everyone out there have a great holiday season and a Merry Christmas.
73 de Milt, N5IA
-Original Message-
From: Milt -- N5IA
Sent: Friday, December 11, 2015 12:18 PM
To: elecraft
Subject: [Elecraft] K3 sub RX off freq in SSB diversity mode
I normally don't have much
Well, after following some suggested routines by various on and off list
repliers, the problem still exists.
Very strange. Any other suggestions before going to the big boys in HQs?
Milt, N5IA
-Original Message-
From: Milt -- N5IA
Sent: Friday, December 11, 2015 12:18 PM
Thanks, guys. Back to it this AM. Had to take off yesterday before all the
replies came in.
Milt, N5IA
-Original Message-
From: George Danner
Sent: Saturday, December 12, 2015 6:52 AM
To: d...@lightstream.net ; Milt -- N5IA
Cc: elecraft
Subject: Re: [Elecraft] K3 sub RX off freq
this
happening before. RIT is off.
I did not try other bands as I normally do not operate on other bands.
I have searched the archives but have not gotten a hit on anything like
this.
Any responses, direct or to the reflector would be appreciated.
Thanks in advance es 73 for now..
de Milt, N5IA
Has anyone received information re when they will be able to get a 160M TX
antenna going?
Tnx for any info.
Milt, N5IA
===
-Original Message-
From: ae...@carolinaheli.com
Sent: Saturday, October 10, 2015 1:04 PM
To: 'Jack Brindle' ; ae
And I have 10 each of the KSYN3 boards should anyone be capable of putting
them to good use.
Just contact me off list.
72 de Milt, N5IA
-Original Message-
From: Wally -K7FEL-
Sent: Thursday, October 08, 2015 1:48 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KSYN3 Cheap
2R+.
Anyone have any idea of why the audio would not be present from the .wav
files even though the files are being selected and the TX keys for the
length of each file?
Any ideas of what to look for would be appreciated.
Thanks, Milt, N5IA, operator of N7GP
-
No virus found
with the exception of perhaps on 80 Meters.
73 de Milt, N5IA
=
Fred, K6DGW commented:
Of course, if clicks and phase noise was an issue
at WRTC, it would impact everyone else negatively.
73,
Fred K6DGW
- Northern California Contest Club
Mitch,
What is the access to the RemoteRig forum?
Milt, N5IA
-Original Message-
From: Mitch Wolfson DJØQN
Sent: Wednesday, June 25, 2014 3:57 PM
To: bwru...@gmail.com ; Elecraft Reflector
Subject: Re: [Elecraft] RemoteRig WiFi Puzzler
Brian,
You should ask this question
plate modulator.
The 6146 final produced a great 65 Watts of plate modulated AM
transmissions.
Memories!!! But I sure wouldn't trade my K3s and accessories for
that setup.
73 de Milt, N5IA, aka KN5FPO and K5FPO in those days.
-Original Message-
From: Phil Hystad
Sent
the GOTA, were all Elecraft K-2's. Photos of
the operation can be viewed at http://www.eaars.org/05fieldday.html
73 de Milt, N5IA
-Original Message-
From: Bill Frantz
Sent: Tuesday, June 17, 2014 7:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Field Day tips
On 6/16
, it is NOT a federal offense.
73, and enjoy the upcoming Sabbath day where there has NOT been any USPS
mail delivery since 1912.
de Milt, N5IA
-Original Message-
From: Scott Manthe
Sent: Saturday, April 26, 2014 8:58 AM
To: elecraft
Everything with a grain of salt. As in all Ham operations, it is LOCATION,
LOCATION, LOCATION.
The the station, and 3rd, the operators. And oh yeah; propagation.
In the past we have run QRP with K2 transceivers and solar power, and set a
national record in our class. See the 2005 score line
Keith,
Please elaborate for us that are uninformed. Thank you.
de Milt, N5IA
-Original Message-
From: XE3/K5ENS
Sent: Monday, April 14, 2014 10:54 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 M/M Contest stations
Don,
No way could someone that was a real serious
Boy, you guys were in HIGH cotton with those great receivers
I built my Eico 720 in 1960 but all I could afford for a RX was a National
NC-60. I later added a home brew Q-multiplier to the NC-60 and that was my
station until 1965.
MEMORIES!!
Now it is K-3's forever.
73 de Milt
Exactly the way it should be, Arlen. You do NOT have a problem.
Congrats, de Milt, N5IA
-Original Message-
From: Arlen Fletcher
Sent: Friday, April 04, 2014 9:24 PM
To: Elecraft Mailing List
Subject: [Elecraft] K3 S-meter question
I’ve just completed building my K3/10 (S/N 8115
.
This is, as said above, IMHO. Just a satisfied, new, short time user, and
YMMV.
Mis dos centavos, de Milt, N5IA
-Original Message-
From: Jim - KE8G
Sent: Saturday, November 23, 2013 9:41 AM
To: iain macdonnell - N6ML
Cc: Elecraft
Subject: Re: [Elecraft] K3 RemoteRig
Hi Iain,
Yes, I agree
of some of our radios?
And are we headed further, to a ‘base’ transceiver world and the ‘cloud’ for
our apps?
Makes you wonder.
73 de Milt, N5IA
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6831 - Release Date: 11/12/13
===
AMEN.
73 de Milt, N5IA
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3408 / Virus Database: 3222/6661 - Release Date: 09/12/13
have gone
unanswered. Hopefully both of us can get some answers.
de Milt, N5IA
==
Original Message Subject: k3/Remote Rig
Date: Fri, 14 Jun 2013 17:34:16 -0700
From: Milt -- N5IA n...@zia
in the southwest US. Also see
http://nm5ml.com/ for total New Mexico coverage.
Good luck in your travels.
de Milt, N5IA
-Original Message-
From: Larry Ewan
Sent: Friday, June 21, 2013 8:01 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: 2m beam orientation
I just made
Cellular telephones and Twitter accounts.
=
-Original Message-
From: Jim Lowman
Sent: Friday, June 21, 2013 4:05 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: 2m beam orientation
I think that's true in many places, Dick.
Ten
radios in the CW Bus photo. Also see
http://www.ws7n.net/7QP/new/PicPage.asp?content=7QPFOTOS_2009
73, and good luck with the quest. Congrats on getting back into the hobby.
Milt, N5IA
7QP Chairman for K7EAR
Eastern AZ Amateur Radio Society, Inc.
-Original Message-
From: Doug Ellmore
Milt, N5IA
-Original Message-
From: Hank Garretson
Sent: Monday, March 25, 2013 12:59 PM
To: Elecraft Reflector ; elecraft...@yahoogroups.com ; RTTY Reflector
Cc: Ben Grokett
Subject: [Elecraft] A Different View--K3 Reduced-bandwidth RTTY Analysis
Andy, K0SM has a very nice look at the K3
.
At least that is what I do.
73 and good luck with the whole banana.
Milt, N5IA
-Original Message-
From: Tony McClenny
Sent: Saturday, March 16, 2013 5:50 PM
To: 'david Moes' ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Echo when transmitting
Thanks to everyone, who offered
instructions do I see anything mentioning how to
power the unit.
Can someone illuminate this ol' boy's mind with information how they are
powering the K3/0?
Thanks in advance.
de Milt, N5IA
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus
for this application.
Do you know if this is left up to the purchaser to construct/provide his own
DC power cable?
Even more reason for something to be put in the manual if that is the case.
Strange.
Thanks.
Milt, N5IA
-Original Message-
From: Don Wilhelm
Sent: Wednesday
Very good. Maybe some user will respond with updated information.
Thanks again.
Milt, N5IA
-Original Message-
From: Don Wilhelm
Sent: Wednesday, March 13, 2013 3:53 PM
To: Milt -- N5IA
Cc: elecraft list
Subject: Re: [Elecraft] K3/0 DC power
Milt,
I related my understanding
on.
There were approximately 200 Qs made on 160 SSB a couple of nights before the
contest.
There were another 200 Qs made on 160 SSB during the 3 nights of operation
after the contest.
VP6DX made a total of 6,671 Qs on 160 Meters of which 1,574 were with the SSB
mode.
73 de Milt, N5IA
-
No virus
to everyone.
de Milt, N5IA
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/5975 - Release Date: 12/20/12
Internal Virus Database is out of date.
__
Elecraft mailing list
. But, it is what it is.
Now to find the KRX3 manual. Thanks, and Happy new Year.
de Milt, N5IA
-Original Message-
From: Don Wilhelm
Sent: Monday, December 31, 2012 4:16 PM
To: Milt -- N5IA
Cc: 'Elecraft Mailing List'
Subject: Re: [Elecraft] Question
Milt,
The most direct way is to remove
to a more efficient, accurate (no
manual meter reading person) and less costly operation.
Mis dos centavos.
de Milt, N5IA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
congrats. Onward and upward.
Milt, N5IA
-Original Message-
From: cloud runner
Sent: Tuesday, June 26, 2012 6:17 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] all Elecraft FD entry
FWIW ... W5YA 3AB (QRP) was an all Elecraft K3 entry on field day this year.
The performance
Adrain,
Don't you understand that it is a LOT farther from VK4 than most other
places. Just takes time
:-) :-)
de Milt, N5IA
-Original Message-
From: Adrian
Sent: Friday, April 27, 2012 8:54 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Moderation
How many years do you
, Field Day in the mountains of southeastern AZ. As you can see, QRP
works VERY well if you are in a good location with good antennas. Good
operators using good equipment also adds to the possibility of success.
YMMV.
de Milt, N5IA
YEAR-CALLSIGN-LOCATION-CATEGORY-CW Qs-SSB Qs-N/T Qs or GOTA Qs
the past ~13 years.
The KEY to successful in-band duplex operation is ISOLATION, either by
polarity or physical antenna separation, or both.
YMMV, and good luck with your trial.
73 de Milt, N5IA
-Original Message-
From: Matt Murphy
Sent: Wednesday, March 21, 2012 12:24 PM
To: Elecraft
operating side by side.
However, common sense must be used in deployment of the antennas.
Separation of antennas is absolutely necessary to preclude self generated
interference and possible damage to the receivers.
YMMV.
73 de Milt, N5IA
-Original Message-
From: Allan Taylor
Sent
with the radios operating side by side.
However, common sense must be used in deployment of the antennas.
Separation of antennas is absolutely necessary to preclude self generated
interference and possible damage to the receivers.
YMMV.
73 de Milt, N5IA
-Original Message-
From: Allan Taylor
that 4 years ago today (the
Tuesday after the Super Bowl) the VP6DX team was flying from Papeete, Tahiti
to Magareva in the Gambier Islands to rendezvous with the Braveheart.
73 de Milt, N5IA
-Original Message-
From: Tony Estep
Sent: Tuesday, February 07, 2012 10:04 AM
To: Elecraft
Subject
Kilometros.
Milli is used as a prefix for terms to indicate 10 to the minus 3rd, but mil
is used as a separate word to indicate 10 to the 3rd.
We humans have sure messed up the pure Adamic language, in multiple
variations.
Happy New Year to all, de Milt, N5IA
-Original Message-
From
And it probably has its origin in Latin. I do know that one thousand in
the Spanish language is un mil when speaking of quantities. However, it
is Kilo when speaking of weights and measures. Strange.
de Milt, N5IA
-Original Message-
From: Bud Morin
Sent: Tuesday, January 03, 2012
appliance or lighting fixture.
I hope that helps a bit with your understanding.
Milt, N5IA
-Original Message-
From: David Dunn
Sent: Wednesday, December 14, 2011 3:04 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Curiosity Only, somewhat off topic.
I noted recently several refs by USA
, and not the tensioned
conductor.
Mis dos centavos, de Milt, N5IA
-Original Message-
From: Tom W8JI
Sent: Tuesday, November 22, 2011 11:22 AM
To: Rick Dettinger ; j...@audiosystemsgroup.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] AC Pole Interference
I think the real concern is small
I placed my order for two new multi-band filters two months ago and have
heard nothing.
de Milt, N5IA
-Original Message-
From: Dan Jean
Sent: Thursday, April 28, 2011 6:04 AM
To: Bert Craig
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: ICE still functioning?
I too am very
centavos, de Milt, N5IA
--
-Original Message-
From: Jim Brown
Sent: Thursday, April 28, 2011 8:28 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: ICE still functioning?
There was general
been extremely good for float charging 2,000 + Amp
Hour battery banks.
Milt, N5IA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Pacific.
Milt, N5IA
-Original Message-
From: Fred Jensen
Sent: Saturday, February 19, 2011 4:09 PM
To: elecraft Reflector
Subject: Re: [Elecraft] barefoot K3 in ARRL CW
On 2/19/2011 2:55 PM, Tony Estep wrote:
Well, it looked a little bleak for a while. I was stuck on 99 for a couple
Milt, N5IA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
This is really a NO-BRAINER.
It is no different than accepting the offer (read as wife's permission to
purchase one K-3) to eat only ONE of a certain brand of chips.
Once you have tasted one (read as owned a K-3), you can't stop there! You
have to have another.
HAPPY NEW YEAR de Milt, N5IA
Congrats Jim. Sounds like a real Chhristmas present!!!
Merry Christmas to all, de Milt, N5IA
- Original Message -
From: Jim Sheldon w...@cox.net
To: Elecraft Mailing List elecraft@mailman.qth.net
Sent: Thursday, December 23, 2010 5:40 PM
Subject: [Elecraft] New K3/P3 is here
James,
I am sure you are in violation of one or more state and federal laws.
Obviously you are polluting the neighborhood at large and the world as a
whole:-) :-)
Now you have incriminated yourself. Oh well.
73, and Merry Christmas to all.
Milt, N5IA
Toxins are a good point
as there is no more than 14 hours with either callsign.
CU all on THE BAND.
de Milt, N5IA
- Original Message -
From: Jim Brown j...@audiosystemsgroup.com
To: Reflector Elecraft elecraft@mailman.qth.net
Sent: Thursday, December 16, 2010 11:01 AM
Subject: [Elecraft] Stew Perry is a Great CW Event
Don't
of the VP6DX team
which outed the K-3 into the DXpedition environment, and given that personal
messages from some of these guys indicated that the transceiver lineup would
be K-3s, I am suggesting there is a high percentage of possibility that the
expedition is POWERED BY ELECRAFT.
73 de Milt
Last February I carried my dual K-3 pack from Rose as carry-on through to
Maine and then back home. They made me un-velcro the two radios and sent
the two packs through separately. Otherwise, No Problema.
Milt, N5IA
- Original Message -
From: Fred Jensen k6...@foothill.net
GHz. No
failures unless a tech made an install mistake with one of them.
As Ken has indicated, they are highly recommended because of the potential
pin migration problem AND for proper pin placement.
Good luck to all. Have a great weekend.
73 de Milt, N5IA
- Original Message -
From
or calculation which has to be performed by a
tech can be eliminated, the percentages of correct connections goes up.
Mis dos centavos.
Milt, N5IA
- Original Message -
From: dave hott...@gulftel.com
To: Milt, N5IA n...@zia-connection.com
Cc: Ken Kopp k...@rfwave.net; elecraft@mailman.qth.net
at this location.
All in all a great day with a fine group of youth and their leaders. Just
needed more signals on 20 Meters.
Milt, N5IA
- Original Message -
From: ussv dharma ussvdha...@yahoo.com
To: elecraft@mailman.qth.net; w...@msn.com
Sent: Thursday, July 15, 2010 1:44 PM
Subject: Re
Scout Camp
combined, on steroids.
YMMV, de Milt, N5IA
- Original Message -
From: Wes Stewart n...@yahoo.com
To: elecraft@mailman.qth.net; n...@n5ge.com
Sent: Saturday, June 26, 2010 10:56 AM
Subject: Re: [Elecraft] Bad start to FD - smoked a K3
I guess all of those DXpeditions using
fluids cost a whole lot more and were
less effective (less dielectric strength).
Do your own research and draw your own conclusions regarding PCBs. YMMV.
73 de Milt, N5IA
- Original Message -
From: Ken Kopp k...@rfwave.net
To: Dave New, N8SBE n8...@arrl.net; Ken Nicely k...@nicelyweb.com
, reply to me directly with your
contact info and availability timing.
Thanks in advance for any assistance.
Milt, N5IA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
that it is
advantageous to ME.
That is my observation and report, and MHO. Happy New Year to all.
Milt, N5IA
- Original Message -
From: David Cutter d.cut...@ntlworld.com
To: Julian, G4ILO julian.g4...@gmail.com; elecraft@mailman.qth.net
Sent: Saturday, January 09, 2010 3:30 AM
Subject: Re: [Elecraft
Jim,
It certainly could be the bandpass response of the microphone element
itself. What are you using for a microphone on the K-3? Check that out.
Milt, N5IA
- Original Message -
From: JIM DAVIS nn...@astound.net
To: elecraft@mailman.qth.net
Sent: Monday, June 22, 2009 11:24 AM
situation. At this point I will open the radio up and see if I can find any
loose connections to the PA.
Milt, N5IA
- Original Message -
From: Iain MacDonnell - N6ML a...@dseven.org
To: Milt, N5IA n...@zia-connection.com
Cc: elecraft@mailman.qth.net
Sent: Thursday, June 04, 2009 10:00 PM
digging into it and looking for what I believe might be a physical
thing (loose connection/connector, etc.) does anyone have any history of
this problem occurring previously. Why reinvent the wheel?
Any ideas anyone?
Milt, N5IA
Nope. Llamas. Higher off the ground for fording streams, no horns, and
they smell just a bit better than goats. BUT, they do have a propensity to
spit. Not anything is perfect!!
Mis dos centavos, de Milt, N5IA
- Original Message -
From: WILLIS COOKE wrco...@flash.net
in the middle of a
tough one on 160 and were trying to dig it out of the noise floor. We had
to wait until the birdie slowly slithered on by or many times I just reached
and turned the SS-30 off during a difficult contact.
73 de Milt, N5IA
Bob's comment is correct. I was at that meeting also, and was absolutely
blown away by the performance in such a small prototype package.
Milt, N5IA
- Original Message -
From: Bob Nielsen n...@clearwire.net
To: elecraft List elecraft@mailman.qth.net
Sent: Wednesday, March 11, 2009 8
Actually, that wire is 4-wire rotor control wire that was used for many
years (perhaps still is) for the simple rotors that don't have brakes in
them. You probably can get it from any of the normal Ham Radio stores that
sell rotors.
Milt, N5IA
- Original Message -
From: Frank
I decided to go a-googling.
Here is what I found at the wireman web site.
http://www.thewireman.com/index.html
In particular at http://www.thewireman.com/rotorp.html
308 4-20,various light weight rotors, resistance 1.04 ohms per 100 ft
per wire 0.30 0.24 0.230 0.218
Milt, N5IA
Use pigtail wires of the largest guage the PP connectors will accept, to
interface between the #8 AWG and the PP connectors.
Milt, N5IA
- Original Message -
From: Julius Fazekas phriend...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Monday, February 16, 2009 6:46 AM
Subject: [Elecraft
Wayne,
The most undesireable aspect of BSET is the fact that the communication with
the computer is interrupted. The logging program dispays a pop-up window
indicating lost communication if BSET is in use for more than a few seconds.
At least that is my experience while using N1MM.
Milt
GM Wayne,
I understand A/B and the swap per AB2TC's comment. But there are some of
the settings which do not follow. I know you know and will address them if
at all possible. It was just my dos centavos thrown into the pile.
73, and thanks de Milt, N5IA
- Original Message -
From
All,
I am wanting to change the audio gain controls for the main RX and the sub RX
so that they perform in the common audio gain and balance control configuration.
I am unable to find the directions to affect this change. Can someone indicate
the location of the instructions in the manual.
Steve,
Contact Eric, K3NA, at e...@k3na.org and give him the details. He should be
able to give you feedback info relative to your request.
Milt, N5IA and VP6DX
- Original Message -
From: S Sacco
To: elecraft@mailman.qth.net
Sent: Monday, January 05, 2009 1:46 PM
Subject
AND describing
in words most will understand the full sequence of events surrounding use or
non-use of preamps at HF.
Thanks for your time and effort to put forth this layman's explanation.
73, de Milt, N5IA
- Original Message -
From: Ron D'Eau Claire r...@cobi.biz
To: 'DOUGLAS ZWIEBEL' doug
on my model.
Milt, N5IA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
.
Milt, N5IA, XZ0A, and VP6DX
- Original Message -
From: Berni G0IDA [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, December 01, 2008 1:57 AM
Subject: [Elecraft] K3 and CQWW
Dear members of the K3,
I just wanted to start a thread for those of you who used a K3 in CQWW
K7EAR, the Eastern Arizona Amateur Radio Society, Inc. (EAARS), is proud to
announce that the results of the ARRL 2005 Field Day as posted on the ARRL
members only web page shows the following:
K7EAR, as a solar powered, all K-2 entry (except 6 2 Meter radio), came
in.
# 6,
83 matches
Mail list logo
