The recording of Wayne's quick Elecraft KX3 tour is now available on
the QRP ARCI website - www.qrparci.org
73
Steve, G4GXL
--
QRP ARCI Webmaster and Board Member - www.qrparci.org
MyAPRS Map - www.g4gxl.com/aprs (Kings Lynn, Norkolk)
Twitter - www.twitter.com/g4gxl
Member: QRP ARCI, G-QRP,
I'll repeat it tonight - say about 11:30pm EDT
And will show it again over the wekend
73
Steve, G4GXL
--
QRP ARCI Webmaster and Board Member - www.qrparci.org
MyAPRS Map - www.g4gxl.com/aprs (Kings Lynn, Norkolk)
Twitter - www.twitter.com/g4gxl
Member: QRP ARCI, G-QRP, TAPR, ARRL, BAT
I just persuaded Wayne to do a quick 5 minute demo of the KX3 live on
the internet
It will start very soon (9.10pm EDT -ish)
Go to www.batc.tv
Select Members Streams
Choose G4GXL
73
Steve, G4GXL
--
QRP ARCI Webmaster and Board Member - www.qrparci.org
MyAPRS Map - www.g4gxl.com/aprs (Kings
around 20:00
Other Activities
We may stream a fly-on-the-wall view of other activities on Wednesday
- Friday evenings.
73
Steve, G4GXL
--
QRP ARCI Webmaster and Board Member - www.qrparci.org
MyAPRS Map - www.g4gxl.com/aprs (Kings Lynn, Norkolk)
Twitter - www.twitter.com/g4gxl
Member: QRP
Tim:
Sounds like a good idea to put them in that order and then drop the F and
number them 1through 32. Sometimes simple is better!
Steve
N4LQ
- Original Message -
From: "Tim Tucker"
To: "Elecraft Reflector"
Sent: Tuesday, May 17, 2011 4:43 PM
Subject: [Elecra
HWonder if some quick drying epoxy would work?
Steve
N4LQ
- Original Message -
From: Dale Putnam
To: n...@carolina.rr.com ; w...@comcast.net ; elecraft@mailman.qth.net
Sent: Tuesday, May 17, 2011 3:05 PM
Subject: RE: [Elecraft] Astron hum/vibration
I'v
>From my experienceOnce it starts, there's no cure. I think the windings
in the transformer eventually start rattling around insideMaybe you
could talk to Astron?
Steve
N4LQ
- Original Message -
From: "Barry"
To:
Sent: Tuesday, May 17, 2011 11:28 AM
Subject:
tenna.
Steve
N8JAF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
enna can't pickup the noise
then you can't phase out the noise!
Steve
N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.n
relay.
Contact me for any further info. 73
Steve
N4LQ
- Original Message -
From: "Al Lorona"
To:
Sent: Tuesday, May 10, 2011 9:19 PM
Subject: Re: [Elecraft] Plasma TV Noise any ideas on how to filter it out.
My next-door neighbor was probably one of the early adopters of pl
my part. I don't recall any such
discussions in recent history so please comment if you can...
73, Steve WU9B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
anual failed to suggest that the paint be scraped
off the case where the output coax connector is attached. If you haven't
already done this, it might be worth a try just to ensure proper grounding.
73,
Steve VE3SMA
__
Elecraft ma
CAT-5 data cable (four twisted pairs of #24 wire) suitable
for this purpose? Are there any special precautions I need to observe?
TNX & 73,
Steve
AA4AK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
Then I should charge my neighbors for protecting their houses from
lightning.
Steve
N4LQ
- Original Message -
From: "Fred Townsend"
To: "'Steve Ellington'" ; "'Randy Moore'"
;
Sent: Thursday, April 21, 2011 4:04 PM
Subject: RE: [El
would lightning be attracted to it
then? It just seems like I'm inviting a hit by grounding it.
Steve
N4LQ
- Original Message -
From: "Fred Townsend"
To: "'Randy Moore'" ;
Sent: Wednesday, April 13, 2011 12:19 PM
Subject: Re: [Elecraft] Ligntning protect
RWD-1 kits are in stock for immediate shipment.
For details, visit www.QRPWorks.com.
73
Steve Silverman KB3SII
QRPWorks
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
Divide it amongst all of us Elecrafters...
On Apr 8, 2011, at 10:16 AM, Paul Huff wrote:
> Now, what will I do with that million dollar lottery prize? ...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
much the bandpass
and low pass filters roll off above 28.8 MHz ? Are there any nasty spurious
signals to be aware of ?
73,
Steve VE3SMA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Looks like a code violation. Turn yourself in!
Steve
N4LQ
- Original Message -
From: "Phil Townsend"
To: "Elecraft Reflector"
Sent: Wednesday, April 06, 2011 11:44 AM
Subject: [Elecraft] Grounds... I know,I know... its a Dead issue BUT... (no
Pun)
>I really ha
Well I just checked it again and now it's working ok. I guess the reboot from
last night fixed it. Sorry if I caused any confusion!
Steve
N4LQ
- Original Message -
From: Larry Phipps
To: lp-...@yahoogroups.com
Cc: Steve Ellington ; Elecraft@mailman.qth.net ; Wayne Bu
Well I didn't mention that I'm also running Logger32 along with PWRSDR-IF from
LP-Bridge I tried closing Logger32 but still, when I just tap the key, MUTE
kicks on and won't go off until I click it with the mouse. Strange.
Steve
N4LQ
- Original Message -
From: Gr
will release when clicked with mouse.
Has anyone else noticed?
Steve
N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
o on.
I've also operated with 100 W and a 3 element beam on rare occasions it's
MUCH easier that way !
73,
Steve VE3SMA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
Hi
is this email list the place to be if wanting to learn about the k-1 /
thanks..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@ma
on how it's used.
>
> Steve
> N4LQ
> - Original Message -
> From: "Mike"
> To:
> Sent: Tuesday, March 08, 2011 5:44 PM
> Subject: Re: [Elecraft] K3 not recieving
>
>
> I've heard quite a few people use balun, when they meant impedence
plenty of good signals on 40
meters especially at night.
Vernon needs something in his shack that he knows (works). The suggestion to
buy the XG2 was a good one. Hooking up with another ham in the area would
really help though. If someone lives close to Vernon they could probably be
a big he
am trying to figure out
where it is in his home. 73 WU9B Steve
On Mar 6, 2011, at 4:37 PM, Jack Brindle wrote:
> I think the video shows something else. Sue is a keeper. No wonder you got
> her Cocoa!
>
> But we expect the next video to show Cocoa doing the painting... ;-)
>
&
e appreciated - and for those that
missed it - we will try again in the next few days
73
Steve, G4GXL
--
QRP ARCI Webmaster and Board Member - www.qrparci.org
MyAPRS Map - www.g4gxl.com/aprs (Kings Lynn, Norkolk)
Twitter - www.twitter.com/g4gxl
Member: QRP ARCI, G-QRP, TAPR, ARRL, BATC, UK Mi
,
Steve K4JPN
http://www.thewinstonator.com/K4JPN.htm
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
And of course you have all the advantages of a rig made in CHINA.
Steve
N4LQ
- Original Message -
From: "Chuck Mabbott"
To:
Sent: Wednesday, February 09, 2011 1:52 PM
Subject: [Elecraft] Look familiar? Elecraft vs Ten Tec
> Everyone saw this???
>
>
>Ten Te
I sure hope RIT with QRQ is in the works and not forgotten.
Even at slow speed, QSK is much better in QRQ mode.
No 2nd rx here so split isn't an option.
Steve
N4LQ
- Original Message -
From: "Wayne Burdick"
To: "Bruce Meier"
Cc:
Sent: Friday, January 28,
FW pre-beta 4.16 release was actually the first to have APF, not 4.17.
Here's an interesting comment made shortly APF was finally released to the
public.
http://elecraft.365791.n2.nabble.com/K3-APF-td5735159.html#a5736718
Steve
N4LQ
- Original Message -
From: "Arie Klei
ocks can only be blown off once?
Steve
N4LQ
- Original Message -
From: "Barry N1EU"
To:
Sent: Wednesday, January 26, 2011 6:12 PM
Subject: Re: [Elecraft] APF
>
> Okay, what version of firmware has the "original" APF that worked better
> for
> you guys? I
some when
turned off!
I believe my neighbor has a Plasma set. It wipes out 80 meters mostly. I
plan to find out soon and if necessary I'll help him replace it. 73
Steve
N4LQ
- Original Message -
From: "Chris Hembree"
To:
Sent: Friday, January 21, 2011 7:56 PM
Subject: [Ele
o tuner in
the K3. I've found this to be a good general purpose antenna.
Steve
N4LQ
- Original Message -
From:
To: "van fair"
Cc:
Sent: Wednesday, January 19, 2011 5:24 AM
Subject: Re: [Elecraft] K3 antenna tuner.
>
>
> Sent from my iPhone
>
> On Jan
Just on the off chance I'd like a KPA 100 to go with my newly acquired K2 .
If anyone has one that they would like to sell , either a kit or a
completed one , I'd be very interested .
Many thanks
73 steve
Correction:
The PA station was running a Kenwood TS-570. His spur was down frequency
about 400Hz. I have also head spurs from SGC 2020's and TenTec Paragons both
caused by low PS voltage.
Steve
N4LQ
- Original Message -
From: "Steve Ellington"
To: "OE5CSP-Chri
nough to be
heard 600 miles away. I've told him about it several times but he says he
has no idea what to do about it and continues to broadcast "CW Stereo".
Steve
N4LQ
- Original Message -
From: "OE5CSP-Chris"
To:
Sent: Saturday, January 08, 2011 5:29 AM
Sub
I've heard myself many times on 80m CW but not the higher bands where one
would expect to hear your long path signal come back. It's still a mystery.
Steve
N4LQ
- Original Message -
From: "Amateur Radio Operator N5GE"
To: "Elecraft Reflector"
Sent: Fr
meter signals to a band that the K3 can cover
for example 10 meters. Also, this box can convert 10 transmit from the K3 to
2 meters.
So there you have it. A transverter allows you to use an HF rig on VHF.
Steve
N4LQ
- Original Message -
From: "tony rowland"
To:
Sent: Tuesd
Dave:
Sorry to dissapoint you but it's a photo (as I said). I copied the photo
from the Yahoo Eagle group. You compare them visually. I own a K3 but not
the other 2 rigs.
I keep hearing about how small the K3 is but in comparison to 2 recent
competitors, it's the BIG DOG on the blo
Dick
>From what i can tell, k3bsr was written by WB8YQJ. I looked him up on
QRZ.com and his email address is listed so you might try emailing him.
Steve
N4LQ
- Original Message -
From: "Edward Dickinson, III"
To:
Sent: Wednesday, December 22, 2010 4:37 PM
Subject: Re: [El
Here is a photo of all 3 rigs from a post on the Eagle reflector.
http://n4lq.webs.com/apps/photos/photo?photoid=110659922
WxHxD inches
K3 11.1 x 4.4 x 11.8 9.4lbs
TS-590 10.63 x 3.78 x 11.46 16.31lbs
Eagle 8.5 x 2.9 x 10.25 7.25lbs
Steve
N4LQ
Logically .
You may as well have a big loss in the near-field and get it over with.
That way you'll have less to loose in the far field!
Steve
N4LQ
- Original Message -
From: "Guy Olinger K2AV"
To: "Tony Estep"
Cc:
Sent: Tuesday, December 21,
My inverted L is 50' up and 150' out. I use a separate elevated counterpoise
for each band. I've found that a ground rod and some buried radials have
virtually no effect. I just use them for lightning protection.
Steve
N4LQ
__
Mr. Happy likes the K3 No Solder Kit.
Steve
N4LQ
- Original Message -
From: "Rex Lint"
To: "'Phil Townsend'" ; "'Barry'"
Cc:
Sent: Friday, December 17, 2010 10:12 PM
Subject: Re: [Elecraft] Soldering Naked
This same thing happened
You will need the K3BCTX board. There has been a delay in production
however.
N4LQ
Steve
- Original Message -
From: "Mel Farrer"
To: "R. Kevin Stover" ; "Phil Townsend"
Cc:
Sent: Sunday, December 12, 2010 8:53 PM
Subject: Re: [Elecraft] K3 fo
is is horribleTry
backing down the AF gain just to the point that you hear the desired tone
and not the other junk. 73
Steve N4LQ
- Original Message -
From: "Sam Morgan"
To: "k5nu" ;
Sent: Tuesday, December 07, 2010 3:30 PM
Subject: Re: [Elecraft] APF
> sorry
How could a 2 circuit plug be mono since there is only 1 circuit?
N4LQ
Steve
- Original Message -
From: "Jim Brown"
To:
Sent: Friday, December 03, 2010 5:57 PM
Subject: Re: [Elecraft] [K3] Shorting K3 PHONE jack outputs (WAS OT: Stereo
to mono adapters)
> On 12/3/2010 2
Here's an excellent 3 page article from 1956. I wonder if Yaesu incorporated
some of the ideas?
http://n4lq.webs.com/apps/photos/photo?photoid=108553476
Forgive the humor.
Steve
N4LQ
__
Elecraft mailing list
Home: http://mailman.qt
Wouldn't having bad key clicks be an advantage in a contest?
Steve N4LQ
- Original Message -
From: "Eric Swartz - WA6HHQ, Elecraft"
To: "David Gilbert"
Cc:
Sent: Wednesday, December 01, 2010 8:43 PM
Subject: Re: [Elecraft] Fwd: New Sherwood report
>
but they still offer plasma TVs in the stores.
OHI've seen a few post about concerns about XRAY radiation from plasma
TVs. maybe health concerns would encourage folks to avoid them?
Steve N4LQ
- Original Message -
From:
Cc:
Sent: Sunday, November 28, 2010 8:44 PM
Subjec
d run some test on
the K3 NB possibly making some custom changes?
Steve N4LQ
- Original Message -
From: "Tommy Alderman"
To:
Sent: Friday, November 26, 2010 6:48 PM
Subject: Re: [Elecraft] Plasma TV and other OT junque
>I have been mistaken (again)! I was under the impres
hearing on 80m is a plasma tv from my
neighbor. Now I just have to figure out a way to approach them about replacing
it. I may end up buying them one!
Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Will 14.3 Mhz distroy the plasma's power supply?
N4LQ
Steve
- Original Message -
From: "Jeff Cochrane - VK4BOF"
To: ;
Cc:
Sent: Thursday, November 25, 2010 12:50 AM
Subject: Re: [Elecraft] Plasma TV Noise any ideas on how to filter it out.
> My pet hate!
> My 3
Another idea for hearing your own signal is at websdr.org. Pick a receiver,
transmit and listen. Usually there is a delay of a couple of seconds.
Steve N4LQ
- Original Message -
From: "Ron D'Eau Claire"
To:
Sent: Monday, November 22, 2010 4:11 PM
Subject: Re: [Elecr
.
I'm confused!
73, Steve, K4FJ
K3#290
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qs
rate backwards up to the beginning.
Steve KZ1X/4
K1, K2, K3, etc.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Hello
Just turn the rig on for the 1st time in several days. I have no RX audio
on USB.
LSB, CW, etc., OK. K3 # 1209, running 4.22.
Any ideas out there? This will really affect my SS score :-(
Steve KZ1X/4
K1, K2, K3, etc
Oh it's the Smiths again!
His call is N6MQL, Michael Aretsky.
Please identify yourself with your callsign or at least your real name.
N4LQ
Steve
- Original Message -
From: "The Smiths"
To:
Cc: "Elecraft Reflector"
Sent: Friday, November 19, 2010 4:27 PM
S
Mni tnx to all who replied - I appear to have had browser problems earlier -
was viewing a (old) cached version of the Elecraft pages.
;-)
Vy 73
Steve, VK6VZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
have been
withdrawn. Please can Wayne or Eric give any idea as to when the next
version of the firmware with the APF included will be release/re-released?
Mni tnx
Steve, VK6VZ
__
Elecraft mailing list
Home: http://mailman.qt
Bill:
Nice job. I figured all along it was either due to a brain problem or being
female.
Steve N4LQ
- Original Message -
From: "Bill VanAlstyne W5WVO"
To: "Bill W4ZV" ;
Sent: Wednesday, November 17, 2010 2:45 PM
Subject: Re: [Elecraft] K3:New APF what hap
Wow...That's a lot more drop than I have so I feel pretty good now!
I still wonder where the K3 is actually measuring. If its reading comes
after a few chokes it would certainly make a difference.
N4LQ
Steve
- Original Message -
From: "N2TK, Tony"
To: "'
Mine reads 13.1v on any band so it doesn't seem to matter.
Steve N4LQ
- Original Message -
From: James Sarte (K2QI)
To: Steve Ellington
Cc: Elecraft@mailman.qth.net
Sent: Wednesday, November 17, 2010 10:08 AM
Subject: Re: [Elecraft] K3 voltage reading
What
ge drop on the power leads. I'm using
the factory cable. I'm not sure if the K3 is indicating the voltage at rig's
connector or the voltage on the final amp. transistors.
Steve N4LQ
__
Elecraft mailing list
Home: http://mailma
Usually I have to open the beta link in another tab or copy and paste the
URL in a fresh browser window. Then once there, a refresh is often required
to bring up the new version.
Steve N4LQ
- Original Message -
From: "JAMES ROGERS"
To: "Elecraft Reflector"
Sent:
James;
Congratulations. You did everything right. Consulted with users, located
defective part, bypassed the choke with wire as suggested and order
replacement. That's exactly what I would have done.
A job well done! 73
N4LQ
Steve
- Original Message -
From: "James Sarte&
Who is "The Smiths"?
Sure are touchy little guys aren't they? Smart too!
N4LQ
Steve
- Original Message -
From: The Smiths
To: n...@carolina.rr.com ; k2qi@gmail.com ; k6...@sbcglobal.net
Cc: Elecraft Reflector ; d...@w3fpr.com
Sent: Sunday, November 1
The magic is only good for one shot Joe.
Same thing happened when I saw the Grand Canyon for the second time.
Steve
- Original Message -
From: "Joe Subich, W4TV"
To: "Wayne Burdick"
Cc: "Elecraft Reflector"
Sent: Sunday, November 14, 2010 9:02 AM
Just bypass it with a piece of wire. It probably won't matter.
It might take months to get your K3 back!
N4LQ
Steve
- Original Message -
From: "James Sarte"
To: "Gene Langendorff"
Cc: "Elecraft" ;
Sent: Saturday, November 13, 2010 10:56 PM
Subject:
I wonder if the solder joint for the K3's key jack is cracked. I've had that
happen on other rigs. Shine a bright light on the solder joint and use a
magnifying glass to examine.
N4LQ
Steve
- Original Message -
From: "James Sarte"
To: "Rick Prather"
suggested by
Gary Surrency. "
I've had no problems with this combination, but I imagine each K2 will be a bit
different.
73,
Steve VE3SMA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
robably have the diagnosis exactly rightthis is a fairly common
problem with K2/100s. Try these links for more info:
http://elecraft.365791.n2.nabble.com/Re-SSB-Power-control-and-KPA100-td63.html#a63
http://elecraft.365791.n2.nabble.com/K2-100-SSB-Power-Control-Problem-td384633.html
. I had to
reduce power to keep it from happening.
Also, a question about the K3's DISP of current. When key down, what is it
displaying? It's showing about 5 Amps and I know that's not right. Can't find
anything in the manual that
Eric
It really does do thatTurn APF's shift up to 1 khz and see. No biggie
but shouldn't happen.
N4LQ
Steve
- Original Message -
From: "Eric Swartz WA6HHQ - Elecraft"
To: "dalej"
Cc: "Elecraft Reflector"
Sent: Saturday, November 06, 2010
That's no doubt the most awesome demo yet!
N4LQ
Steve
- Original Message -
From: lloyd chastant
To: elecraft...@yahoogroups.com
Sent: Friday, November 05, 2010 5:00 PM
Subject: [Elecraft_K3] APF [1 Attachment]
[Attachment(s) from lloyd chastant included
Not very good but hopefully gives some idea of what it does. Also, when I said
2.7 mhz, I meant 2.7 Khz!!
http://www.youtube.com/watch?v=ORhcZrMegz4
Steve
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
If APF seems overly aggressive, try reducing the RX-EQ's 800 and/or 400 Hz
bands by a few DB. I'm finding the EQ settings reall affect how APF sounds.
Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
sadvantage.
So I demand a refund for this APF thingOh waitI forgotIt's free.
Will Elecraft pay my electric bill?
Steve N4LQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
Joe
What you describe is not 'variable'.
N4LQ
Steve
- Original Message -
From: "Joe Subich, W4TV"
To: "Guy Olinger K2AV"
Cc:
Sent: Sunday, October 31, 2010 4:47 PM
Subject: Re: [Elecraft] K3 APF Adjustable Q
>
>>> What I have been tryi
advantage to an external APF box is how the sidetone is filtered and
ends up sound so sweet. Normally sidetones sound a bit dull but APF can
brighten them up and make them sound so pure and clean.
Steve
- Original Message -
From: "Vic K2VCO"
To:
Sent: Sunday, October 31,
nearly to the point of oscillation then back it off a tad. If
the signal is weak but there is a lot of QRN, I would back off the
selectivity a bit further but still take advantage of some extra peaking
capability.
N4LQ
Steve
- Original Message -
From: "Joe Subich, W4TV"
) it just a tad.
Otherwise it's a HUGE improvement, sounds great and I wish to thank those
who made it possible.
73
N4LQ
Steve
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
hink I can get one installed
before CQWW (ha ha).
73, Steve WU9B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
he quality of the note which helps,
at least this cw op, send faster with fewer errors. I suppose it could be
considered psychoacoustic but it works.
N4LQ
Steve
- Original Message -
From: The Smiths
To: n...@carolina.rr.com
Sent: Wednesday, October 27, 2010 4:22 PM
Subject: RE:
I'm wondering if the sidetone could be routed through the APF? Using a
simple audio filter makes the sidetone sound sharper and cleaner and somehow
improves my sending ability.
N4LQ
Steve
- Original Message -
From: "Wayne Burdick"
To: "Guy Olinger K2AV"
Cc: &
Jim:
I've posted the message on both lists.
73,
Steve
AA4AK
Jim Cox wrote:
> Have you tried the Writelog reflector?
>
> Jim K4JAF
>
>
>
> - Original Message -
> From: "Stephen W. Kercel"
> To:
> Sent: Sunday, October 24, 2010 12:59 AM
Tried that. It was also too loud. The K3's fan is quiet. I also have the
little MFJ switcher. It is also too loud but good enough for occasional use
in the workshop.
N4LQ
Steve
- Original Message -
From: "Scott Ellington"
To:
Sent: Friday, October 15, 2010 4:11
I've got the Samlex 1235 with the meters. One of the meters was way off
calibration. When the fan kicks on, it's really loud. I quit using the thing
and got a nice Astron 35m which is totally silent. I hate fan noise.
N4LQ
Steve
- Original Message -
From: "callen1
er. Noise reduction does
help, but it would be nice to quiet this down as John suggests.
My .02
Steve, W1ES
-Original Message-
>From: John Chappell G3XRJ
>Sent: Oct 8, 2010 8:22 AM
>To: Elecraft@mailman.qth.net
>Subject: [Elecraft] K3 AGC THR doesn't go low enough
>
>I
p the
vibration.
Steve
- Original Message -
From: "Carl Vangsness, N9GC"
To:
Sent: Sunday, October 03, 2010 12:39 PM
Subject: [Elecraft] Elecraft Hexkey Question
> After he passed away, N2DAN's XYL sold the design and patent for the
> N2DAN paddle to Bencher. Both
John
Take a look at RigSync
http://www.ehr.net/w2rf/
Steve N4LQ
- Original Message -
From: "John Seney"
To:
Sent: Thursday, September 30, 2010 10:59 AM
Subject: [Elecraft] Flex 1500 second K3 Receiver
>I have both radios and love them. Is there software that will make e
I would recommend you buy one immediately.
Steve
- Original Message -
From: "Adriano Perazio"
To:
Sent: Monday, September 27, 2010 10:07 PM
Subject: [Elecraft] OMNI VII
Hello all
I´m new here and thinking about a O7.
I run almost all the time in SSB contests and DX.
Own a
a lot of
folks to believe none was present.
How about a nice HW-16? No relay!
Steve
- Original Message -
From:
To:
Sent: Monday, September 27, 2010 6:49 PM
Subject: Re: [Elecraft] Eagle keying
>
>
>
> "Steve Ellington" said:
> I used the Eagle while ther
Just ignore if you don't like.
Elecraft has helped set a design standard that is now showing up in other
rigs such as the Eagle and TS-590. We need freedom to discuss the merits of
each application.
Steve
- Original Message -
From: "Mike Harris"
To: "Elecr
individual TT rigs. Go to groups.yahoo.com and do
a search for Eagle.
Steve N4LQ
- Original Message -
From: "Fred Jensen"
To: "Elecraft Reflector"
Sent: Monday, September 27, 2010 12:34 PM
Subject: [Elecraft] [OT]TenTec Hamfest
> Does TenTec have their own
http://www.tentec.com/?id=360
It will compete with Kenwoods TS-590, same price. Here's the link:
http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Communications/AMA/Brochures/TS-590.pdf
Make your own decision.
Steve
__
Elecraft ma
TenTec
over Kenwood then this might be your best bet.
Steve
- Original Message -
From: "Dave Perry N4QS"
To: "'Elecraft Reflector'"
Sent: Saturday, September 25, 2010 10:31 AM
Subject: [Elecraft] The Eagle has landed!
> Friends attending the Ten Tec
test
AA4AK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
901 - 1000 of 1890 matches
Mail list logo
