ubstitute a
universal driver that may not do what you want.
Now with the latest Windows 10 update, some changes have been made to the
Privacy settings on your computer, specifically devices that act as
Microphones, one of which is probably the USB codec that Elecraft uses.
Make sure it is
Paul NA5N - the Ten Tec Triton IV was available in 1976, which is when I
bought one from 'Ham Buerger' in Philadelphia, where I lived at that time.
As you say, it was the first 100 watt solid state rig with full break in.
73,
Tom G3OLB
is a combination of
ramped-up production plus somewhat of an order lull after the orders of the
first week were placed in August.
Regards,
Tom NY4I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
?search_query=Win4K3Suite
and download a 30 day free trial at va2fsq.com
Robust and contest proven, Win4K3Suite has been chosen as the software
integration platform for the upcoming DXpediation to Baker Island in 2018.
73 Tom va2fsq.com
---
This email has been checked for viruses by Avast antivirus
KRx3A -2nd Receiver - No additional filters
KPAK3AUX KPA to K3 Aux cable
Heil HMM hand mic
$3400 includes shipping. Payment via PayPal. US Only.
Tom-KQ5S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Thanks very much - I've fiddled around with the settings so much, I've
gotten
lost. :-)
Best regards,
Tom, W1TEF
On 4/25/2018 8:25 AM, Bob N3MNT wrote:
Turn PX3 off ( using switch on PX3)
Hold the Labels key and tap PWR ( Hold labels for 2 secs then release)
You should see Configuration
and I
can't seem
to get it back to where I want it - resetting it is the best option).
Thanks in advance.
Tom, W1TEF
Lexington County, SC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Is the Newsletter the same as the list "Digest"?
On 4/24/2018 3:25 PM, John Gibson wrote:
How do I sign up to receive the Elecraft newsletter? And where do I find back
issues?
Thank you and 73,
John, no8v
__
Elecraft mailing list
Receiver - No additional filters
KPAK3AUX KPA to K3 Aux cable
Heil HMM hand mic
$3600 includes shipping in original box. Payment via PayPal. US Only.
Tom-KQ5S
kq5stom at outlook.com
Tom
__
Elecraft mailing list
Home: http
Hi,
Is it possible that menu "Tune PWR" is set to 0?
Tom
-Original Message-
From: Martin Sole
Sent: Monday, April 9, 2018 12:35 PM
To: k...@arrl.net
Cc: Elecraft Discussion List
Subject: Re: [Elecraft] K3 Apparent PA failure ?
I’m pressing TUNE. Mode VOX etc shouldn’t matte
https://www.techbriefs.com
73, Tom W4KX
Sent from my iPad
> On Mar 26, 2018, at 1:24 PM, n0...@juno.com wrote:
>
> Back in the early 80's, a friend of mine had a job-related
> subscription to "NASA Tech Briefs" (or something like that title).
> I never read the arti
Comparison from LP-Pan site. I'm just the messenger. :-)
http://www.telepostinc.com/P3_comp.html
-
73,
Tom - KQ5S
On Sat, Mar 24, 2018 at 4:06 PM, Dick Dickinson <softb...@windstream.net>
wrote:
> I use a K3 along with a LP-Pan and a K3 and a Windows computer. I
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Can anyone tell me at what point (Date-S/No.) Elecraft started fitting gold
flashed connector pins on the internal connectors? A member of our contest
group is interested in buying a used K3 and I have advised him not to get an
older one because of the connector reliability issues.
Thanks,
Tom
like my
setup is the opposite of the design intent of the RemoteRig and I am
interested in seeing how the radios behave before I move to the design
phase
Thanks and 73
Tom W2SC
__
Elecraft mailing list
Home: http://mailman.qth.net
___
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@
From their web page http://www.lral.lv/3c0w_3c3w/index.html
"One K3 transceiver broke down. Seems it’s the same fault as during the
previous DXpedition. Spare KX3 is now put into operation and 2 stations are
on the air."
Curious to know what happened.
-----
73,
previous post below.
>
Thanks, Tom NB5Q
>
> --
>
> Message: 5
> Date: Fri, 2 Mar 2018 21:06:41 -0700
> From: Tom Norris <tknorris0...@gmail.com>
> To: Elecraft List Server <elecraft@mailman.qth.net>
> Subject: [Elecraft] K3 util
tried to search the archives but the posts I've found do
not address that part of the problem.
Thanks, Tom NB5Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
uency will be replaced by the VFO A frequency."*
-----
73,
Tom - KQ5S
On Sun, Feb 25, 2018 at 8:03 AM, Tom-KQ5S <kq5s...@gmail.com> wrote:
> Perhaps I should have mentioned I have Config: VFO IND set to yes and I
> have the second receiver in the K3S.
>
> ----
Perhaps I should have mentioned I have Config: VFO IND set to yes and I
have the second receiver in the K3S.
-
73,
Tom - KQ5S
On Sun, Feb 25, 2018 at 6:15 AM, Tom-KQ5S <kq5s...@gmail.com> wrote:
> I am trying to use the Frequency Memory Editor to store some fr
to the radio, when I use the M->V key and
rotate the dial to VFO 01 and hit M->V again I get the same results.
I also tried entering the frequencies in memory using the radio buttons and
get the same results.
Any ideas what I am doing wrong?
-
73,
Tom
...
Tom N5TW
---
From: Wayne Burdick <n...@elecraft.com>
If you?ve just received a KPA1500 and have a question outside Elecraft?s
normal business hours, please post the question here. Eric and I, as well as
rest of the engineering team, monitor the list reg
Hi,
Win4K3Suite has built in virtual port sharing supporting up to 6
simultaneous programs or hardware devices. It can work with any third party
software. You can see this in this video.
https://youtu.be/1jh6IS0S1dE
73 Tom,
-Original Message-
From: Michael Aust
Sent: Thursday
with the K3. If you use any virtual ports, it will not work reliably.
A WinKey is a good solution and not expensive. Most software packages
support WinKey.
73 Tom
va2fsq.com
-Original Message-
From: Bill DeVore
Sent: Wednesday, February 21, 2018 8:52 PM
To: elecraft@mailman.qth.net
the USB devices in the VMWare settings
(I think there is a tab on the top to do so.) If this is not done, then no
ports are available.
Hope that helps.
73 Tom
va2fsq.com
-Original Message-
From: Don Wilhelm
Sent: Friday, February 16, 2018 5:55 PM
To: Greg Best ; elecraft@mailman.qth.net
I believe FT8 is 13 sec TX, 2 sec decode and then 15 sec RX for a total of
17 sec non-TX so you have 13 sec TX and 17 sec RX. Much less than 50%.
-
73,
Tom - KQ5S
On Wed, Feb 14, 2018 at 6:51 PM, Jim Brown <j...@audiosystemsgroup.com>
wrote:
> And even this is con
in panadapter support for the P3, LPPAN and the SDRPlay
RSP. There is no configuration necessary to support all modes and filter
settings for QSY's.
You can read user reviews here:
https://www.eham.net/reviews/detail/11214
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
lease help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing
/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
any speaker attached!
Tom
-Original Message-
From: Dave Hachadorian
Sent: Saturday, January 27, 2018 5:43 PM
To: Tom
Subject: Re: [Elecraft] My radio all of a sudden is so loud it blew a
speaker!
Did AGC get turned off?
-Original Message-
From: Tom
Sent: Saturday, January
and it seems that it is now back to the way it
was.
So is it really that loud on High and why would I have not seen this before?
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Hi,
Win4K3Suite supports the KPA1500.
73 Tom
-Original Message-
From: Richard Thorne
Sent: Thursday, January 18, 2018 2:19 PM
To: Elecraft Reflector
Subject: [Elecraft] KPA-1500 Software?
Will there be any software to monitor control the KPA-1500?
I will probably rack mount
se is 1.47.
-----
73,
Tom - KQ5S
On Tue, Jan 16, 2018 at 7:18 PM, Jack Brindle <jackbrin...@me.com> wrote:
> Hey Richard;
>
> I’m glad you are enjoying our creation. The KPA500 is truly a fine piece
> of hardware and firmware
> that continues to evolve. The most r
n’t wire based (not an
> issue for a LAN).
>
> Rick WA6NHC
>
> Smell Czech correction happen
>
> > On Jan 11, 2018, at 6:49 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
> >
> > Tom,
> >
> > Look in the archives for the post by Eric Swartz
Thanks. I will check them out.
Tom
N4WE
On Thu, Jan 11, 2018 at 7:12 PM Matt NQ6N <m...@nq6n.com> wrote:
> One other note: there is also a remotehams Android app which can also be
> used for operating the rig via rcforb on phone.
>
> On Thu, Jan 11, 2018 at 7:10 PM Matt N
I will be bed-ridden with a broken leg for a few weeks. Does anyone
know of any straightforward methods for operating my K3S and KPA500
over my wireless LAN using my laptop plus Ham Radio Deluxe or another
software package?
Thanks,
Tom
N4WE
Mystery Solved
Cops sent two cars, ...climbed the tree...
https://va2fsq.com/geocache/
Click on the pic...
73 Tom
-Original Message-
From: Charlie T
Sent: Sunday, January 7, 2018 7:54 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Very off topic, but trying to get info
place to ask since there are
people from many areas of technology around here, including military...
Please respond off list. Should I call the police?
Thanks, Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
with no conflicts.
You can see some videos on Win4K3Suite here:
https://www.youtube.com/results?search_query=win4k3suite
and some reviews here: http://www.eham.net/reviews/detail/11214
There is a ffree 30 day trial available at va2fsq.com
73 Tom
P.S. I would be interested to hear from the KPA1500
For some reason, I've been getting the above error message when trying to
run my KX3/KXPA at 100 watts. I just repeated the power calibration for all
the bands. Any suggestions?
Tom Field
KN6DR
__
Elecraft mailing list
Home: http
a way to see how the K3S is
functioning and that my thinking is in the ball park.
Thank you and 73,
Tom NB5Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
according
to the oscilloscope. Am emailing k3supp...@elecraft.com and hope they find,
as you say, that they can cure my 'Stupid' :-)
I'm confused as to getting these messages on the Elecraft Reflector, I hope
this one makes it.
73,
Tom NB5Q
On Sat, Dec 16, 2017 at 6:56 PM, Don Wilhelm <d
with VFO A knob (which is the instructed 'Parameter'
adjustment knob I assume?)
Ext W Mtr is working ok with Omni D output
I must be missing something? Setting?
Thanks, Tom NB5Q
__
Elecraft mailing list
Home: http://mailman.qth.net
to
install the FM 13Khz in FL1, the 2.8Khz in FL2, leave FL3 blank, install
the 400hz in FL4 and leave FL5 blank. Are there any disadvantages to this
approach? I'm thinking the FM 13Khz filter will allow me to dabble in FM
and AM (I have typically not been a phone person)?
Thank you,
Tom NB5Q
me.
Am I to assume that the battery itself is faulty and needs to be
replaced (it has been in light service for a good number of years...but
connected to the charger the entire time or is the it possible that
charger has developed a problem?
Any thoughts on this would be very much appreciated.
be
replaced (it has been in light service for a good number of years...but
connected to the charger the entire time or is the it possible that
charger has developed a problem?
Any thoughts on this would be very much appreciatued.
Thanks
T
Yep had a blast this weekend with 160! It was very busy.
Tom KB5RF
On Sat, Dec 2, 2017 at 7:08 PM, Wayne Burdick <n...@elecraft.com> wrote:
> The ARRL 160 m contest is in full swing. See:
>
>http://www.arrl.org/160-meter
>
> Sounds like Field Day on the band right no
.
73,
Tom
NB5Q
On Sat, Dec 2, 2017 at 7:27 AM, Mark Goldberg <marklgoldb...@gmail.com>
wrote:
> I agree with all this advice. I can tell you that any questions you have
> will be answered by the fine people on the Elecraft forums, and if they
> can't, Elecraft provides exception
Speaker; The Elecraft
K3S and P3 by Fred Cady; K3S ATU; K3S Gen. Cov. RX Module; KFL3C-400; 2.8
for 2.7 kHz swap; KFL3B-FM; P3 Video/FFT Adapt.; P3 TX Monitor Adapt; 1.8-54
MHz 200W; incl. P3TXMON
Thanks a lot,
Tom Norris NB5Q New Mexico
, 2017 4:21 PM
To: Tom
Cc: Elecraft
Subject: Re: [Elecraft] Digitized IF over IP?
Although the IF frequency is 8.215Mhz the bandwidth at that frequency can't be
that much. Wouldn't down converting or sampling then down before down
converting yield a much more reasonable data stream?
As you suggest
course I'm
simplifying this a lot but it's the general idea.
There are lots of solutions out there. Just look up software defined radios
and dongles and find some drivers that will stream the data.
73 Tom
va2fsq.com
-Original Message-
From: Jim Miller
Sent: Monday, November 20, 2017 2:32
Hi,
The questions is why? What are you trying to achieve?
Tom
va2fsq.com
-Original Message-
From: Lynn W. Taylor, WB6UUT
Sent: Monday, November 20, 2017 2:14 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Digitized IF over IP?
Latency is going to be a huge problem.
73
. There will be no issue when you
power up your PC etc.
Since the K3 will go into transmit anyways, the most likely item then is
LPBridge (which the OP said he was using) OR VOX is enabled on the line-in
in the rear and the sensitivity is just too high.
73 Tom
-Original Message-
From
. It also is possible that you will have to go
into the driver advanced options for the serial port and turn off
interrogation at start and other possible values. Play it safe, just use
software Ptt for everything. 73 Tom Va2fsq.com
Sent from my Samsung Galaxy smartphone.
Original message
available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Win4K3 virtual ports do not support DTR and RTS keying.
However there are many other ways to do so, including software PTT (if the
software supports it), a serial port keyer, or WinKey.
73 Tom
va2fsq.com
-Original Message-
From: Jim Brown
Sent: Monday, November 6, 2017 3:12 PM
://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft
Hi,
The problem appears to be blown relays for the 20m LPF in the KXPA100.
73 Tom
va2fsq.com
-Original Message-
From: Don Wilhelm
Sent: Friday, October 27, 2017 5:48 PM
To: Tom ; Elecraft
Subject: Re: [Elecraft] Did I fry my KXPA100?
Tom,
I certainly don't know what the problem
HI,
Nope, never saw or heard a report of this. I know quite a few people doing
this.
Did you try the usual? Swapping cables, Opening the P3 and resetting any
connectors or boards?
73
va2fsq.com
-Original Message-
From: Tom Schaefer
Sent: Friday, October 27, 2017 5:46 PM
I noticed that when I have an SDRPlay RSP 2 active that the P3 display flashes.
The SDR is connected to IF Out on the P3.
Has anyone else seen this happen?
Thanks
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
, the KPXA100 is working fine on all other bands. It just
so happens that this seems to happen only on 20m.
Everything looks the same as far as I can tell, same antenna (all testing is
into a dummy load)
So it is only on 20m.
What have I missed?
Thanks, Tom
-Original Message-
From
Hi,
Just to be sure, I disconnected all control signal, only RF into the amp at
10W
No output, but no errors in the KXPA100 utility.
73 Tom
va2fsq.com
-Original Message-
From: Tom
Sent: Friday, October 27, 2017 3:15 PM
To: Elecraft
Subject: [Elecraft] Did I fry my KXPA100?
HI
the amp then goes into bypass.
Anyone have any ideas?
Thanks, Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
+ (Spectrum too!) and any other package.
You can see Win4K3 in action here:
https://www.youtube.com/watch?v=htVlc9x0IoU=381s
and with N1MM+ here: https://www.youtube.com/watch?v=_769Dli_lJo=380s
You can also check out the reviews on eham:
http://www.eham.net/reviews/detail/11214
Thanks
73 Tom
Hi,
Max's answer is right on the money.
If you never used a panadapter before, any of them will be a fine addition.
Also if you are not a avid contester, the RSP1, can't be beat for the money.
73 Tom
-Original Message-
From: M. George
Sent: Tuesday, September 26, 2017 1:34 PM
LOL!! Yep
Tom, W1TEF
On 9/18/2017 11:07 PM, Fred Jensen wrote:
Such was also the "Cult of the Windom" for those of us teenagers who
couldn't afford 75 ohm twinlead for CF 1/2 wave dipoles.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 9/18/2017 4:31 PM,
will go in split
before it changes band. The consequence is you have to do it twice at times.
Hope this helps.
73 Tom
va2fsq.com
-Original Message-
From: Wes Stewart
Sent: Monday, September 4, 2017 2:36 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT - WSJT-X & K3s
Hi Bob,
I did not consider the efficiency of the power supply. The 600W was the
difference between his shack load with the receiver in standby and in full
transmit. So as you state, if the power supply is only 50% efficient, then
276W times 2 would be close to the 600W difference.
———
Tom
the amp off of a UPS. You will not get
much operating time, matter of minutes, so maybe it is for surge protection.
———
Tom
> On Aug 30, 2017, at 7:28 AM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Tom,
>
> That 3000 watts I mentioned is for everything in the statio
3000W at 120V is 25 amps. He had better have a dedicate circuit. I believe if
I had to run a dedicated circuit I would run a 220 circuit for the amp and put
everything else on the UPS.
-
KQ5S-Tom
> On Aug 30, 2017, at 6:42 AM, Don Wilhelm <donw...@embarqmail.com> wrote:
Something is not right. If your UPS is showing 350 with the K3S at idle and
over 900 on transmit that is a difference of close to 600. The K3S draws 17-22
amps at full key down and 100 watts. Assume 20 amps at 13.8V. That is only
276. You are showing double that.
-
KQ5S-Tom
fully functional trial.
73 Tom
va2fsq.com
-Original Message-
From: Wayne Burdick
Sent: Saturday, August 12, 2017 3:12 PM
To: Elecraft Reflector
Cc: k...@yahoogroups.com ; elecraft...@yahoogroups.com
Subject: [Elecraft] "Contester's Spectral Display" feature of N1M
. If you cannot
download the file then there is something fundamentally wrong in your
Windows install.
But it has nothing to do with the latest Win4K3 release.
73 Tom
-Original Message-
From: Bill
Sent: Saturday, August 12, 2017 1:16 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
://www.youtube.com/watch?v=htVlc9x0IoU
and some reviews here:
http://www.eham.net/reviews/detail/11214
Check out how to use the built in Spectrum Scope!
https://youtu.be/bzCjWOjj9ns
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast
Meant to send this to the group.
73,
Tom - KQ5S
-- Forwarded message --
From: Tom-KQ5S <kq5s...@gmail.com>
Date: Sun, Jul 30, 2017 at 1:47 PM
Subject: Re: [Elecraft] How to keep track of grid squares logged?
To: Wayne Burdick <n...@elecraft.com>
DXKeeper, the loggi
The point should be that a "drop of LocTite" isn't going to fix the
problem over time.
You should not have to modify a product immediately out of the box
because of a lousy
design.
Best regards,
Tom, W1TEF
Lexington, SC
On 7/24/2017 6:22 PM, John Oppenheimer wrote:
This is the
addressed
because its little annoyances that create
negative product impressions.
Very best regards,
Tom, W1TEF
Lexington County, SC
On 7/24/2017 11:45 AM, KENT TRIMBLE wrote:
The issue is not that the paddles don't leave the factory fully tested
and operational, but that the stand-off
.
Anyway, I'm good. I'm grateful.
Tom
On Mon, Jul 17, 2017 at 11:57 AM, Brian Hunt <huntin...@coastside.net>
wrote:
> Is the RF gain all the way up (-0)? Preamp ON? Is the CWT cursor
> blinking with the received CW? Make sure the filter is centered on the
> PITCH tone (indicated by the
for them.
Settings:
MODE: CW
FILTER: .45
CWT: on
Logging: On
Green LED is showing
RX Thr - I've tried from THR1-THR4 - no change
The "T" is showing in the lower right hand corner
Is there some other setting I may have inadvertently changed?
appreciatively
Tom
KB5RF
--
Inspire Curiosit
this is an embarrassingly simple remedy but I'm
befuddled at the moment.
Could someone email me your suggestions tom.par...@gmail.com.
Appreciatively
Tom
On Sun, Jul 16, 2017 at 8:50 PM, Tom Parish <tom.par...@gmail.com> wrote:
> For some reason I've butterfingered the settings
For some reason I've butterfingered the settings on my KX2 and for the life
of me I cannot get it to work in decoding mode. I keep looking at the KX2
manual on page 29
The thing is the display is a show a 'T' in the lower right hand corner
indicating it's on. I'm in CW mode. I can hear CW coming
name it! Includes a built in Panadapter supporting LPPAN, and SDRPlay.
You can see an overview here:
https://www.youtube.com/watch?v=htVlc9x0IoU
and some reviews here:
http://www.eham.net/reviews/detail/11214
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software
Thanks Joe. Mike, W9MDB, sent me a procedure using WSJTX to determine the
cutoff points. I arrived at exactly what you are saying. I am using 1500
and find that I can copy JT9 out to 3000 and if a stronger signal out to
about 3300.
73,
Tom - KQ5S
On Tue, Jul 4, 2017 at 7:25 AM, Joe Subich
T-X adjust
the VFO frequency as needed, when T/R switching occurs. Choose None if you
do not wish to use split operation.
73,
Tom - KQ5S
On Tue, Jul 4, 2017 at 12:37 PM, Jim Brown <j...@audiosystemsgroup.com>
wrote:
> I agree. I use WSJT-X mostly on 6M during the summer and 160M during the
in the range 1500 to
2000 Hz so that audio harmonics cannot pass through the Tx sideband filter.
Select Rig to use the radio’s Split mode, or Fake It to have WSJT-X adjust
the VFO frequency as needed, when T/R switching occurs. Choose None if you
do not wish to use split operation.
73,
Tom - KQ5S
WJTX mode set to JT9/JT65 and can work both without having to
change anything.
Of course I could be off in left field and if so someone will correct me.
73,
Tom - KQ5S
73,
Tom - KQ5S
On Tue, Jul 4, 2017 at 8:05 AM, Bob McGraw K4TAX <rmcg...@blomand.net>
wrote:
> Why split? The K
/www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
I am trying to tweak my WSJTX setup. What is the recommended shift for the
K3S while running WSJTX? I have the 2.8 khz SSB filter installed. I am
using a width of 4 khz and using the radio in split mode.
73,
Tom - KQ5S
__
Elecraft
Hope this is not a dupe. I sent it over an hour ago and nothing showed up.
I am trying to tweak my WSJTX setup. What is the recommended shift for the
K3S while running WSJTX? I have the 2.8 khz SSB filter installed. I am
using a width of 4 khz and using the radio in split mode.
73,
Tom
of these will
also have power management settings. It is best to disable power management
there as well.
73 Tom
va2fsq.com
-Original Message-
From: Mike Murray
Sent: Wednesday, June 28, 2017 12:46 PM
To: Dick Dievendorff ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - Intermittents
. Seems I read somewhere
there's a special one (expensive) that is the only one that will work?
Tom, K4IE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
And before you ask, yes
I know
about "better" keys and I do use them, but I want to solve this issue as
I really like
the idea of the built in paddles - it's very convenient when operating
mobile.
Very best regards,
Tom, W1TEF
___
Thanks Don, Indeed the Low Bat was set at 10. I moved it to 8.5. And I’m using
the Black Enloop Pro batteries.
Waiting for FD
73
Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
>1.3 volts.
Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help supp
the radio.
You can see an overview here:
https://www.youtube.com/watch?v=htVlc9x0IoU
and some reviews here:
http://www.eham.net/reviews/detail/11214
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
JT65 Montreal to St Louis Missouri
Thanks for the tips Wayne.
From: Robie Elms
Sent: Monday, June 5, 2017 3:51 PM
To: Wayne Burdick
Cc: Tom ; Elecraft Reflector
Subject: Re: [Elecraft] 6 meters is open
Additional info:
50.276 JT65 - lots of signals here (grid EL29) this afternoon!
Robie
_
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@vi
301 - 400 of 3044 matches
Mail list logo
