Hi George,
Using the power button of the K3s first.
73, Evert
PA2KW / 5T2KW / W8S
-Original Message-
From: ev...@pa2kw.com
Sent: Thursday, 4 April 2024 22:58
To: 'George Fremin III'
Subject: RE: [Elecraft] ptt-key
Hi George,
Using the power button of the K3s first.
73, Evert
I changed the PTT-KEY setting in my K3s (K3+KIO3B) to DTR-RTS, but powering off
it returns to OFF-OFF.
Can this be stored permanent or am I missing something?
73, Evert
<https://www.qrz.com/db/PA2KW> PA2KW / <https://www.qrz.com/db/5T2KW> 5T2KW /
<https://www.qrz.
If someone could tell what manufacture/type/model these cores are, I'm sure you
can get this done for $20
73, Evert
PA2KW / 5T2KW / W8S
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of G4GNX
Sent: Tuesday, 12 March 2024 16:13
To: Elecraft Reflector
Subject
Tnx Joe!
That was the solution.
73, Evert PA2KW
-Original Message-
From: Joe Subich, W4TV
Sent: Saturday, 6 January 2024 15:23
To: ev...@pa2kw.com; Elecraft
Subject: Re: [Elecraft] K3 SUB-RX audio
In Windows Sound Control Panel ... select the Recording tab then select
"micro
of?
Any help appreciated.
73, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
soldering the new encoders !!)
- put the encoders in place one by one with abt 1.4 mm distance to the front
PCB (nylon washer, I used a piece of ty-rap) and solder them.
Thanks all for the on-list and off list help and suggestions.
73, Evert PA2KW
-Original Message-
From: elecraft-boun
Anyone here who knows the Mouser/Farnell/Digi part number for the knobs (centre
and outer) for AF/SUB on the K3?
Having several K3’s (not K3S) here for updates/mods/repair and want to replace
the broken ones.
73, Evert PA2KW
all as they are in a nasty place (most probably have to
remove the LED board but will have to look into it carefully).
73, Evert PA2KW
From: Kimo Chun
Sent: Sunday, 21 May 2023 18:48
To: David Pratt ; ev...@pa2kw.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Rotary encoder
I think I have a defect rotary encoder on a K3.
It is the one used for setting the bandwidth (Hi/Width).
Anyone out here who knows the manufacturer / type number of this rotary encoder?
73. Evert PA2KW
__
Elecraft mailing list
Home
.
73, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Alpha was "close" to making this device :
https://www.alpharfsystems.com/?p=1494
Unfortunately it is a dream until this moment.
73's Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Al Lorona
Sent: Thursday, 1 July 2021 19:09
To: Elecraft
software
solutions (algorithms etc.)
Just wondering if during the K4 design this “chance” was considered and if so,
how this was implemented ?
73, Evert PA2KW
(waiting for the K4 kit)
__
Elecraft mailing list
Home
Hello Geert,
I guess the VFO-B knob for the K3S will fit, doesn't it?
The K3S is still available. Most probably available with a different part
number.
Just verify if the diameter of the ax K3 vs K3s is the same.
73's, Evert PA2KW / 5T2KW
-Oorspronkelijk bericht-
Van: elecraft-boun
A Q abt the KRC2:
Is it possible two switch to two different antennes within one band but
based on frequency span ?
Example:
3.500 - 3.650 Mc Antenna 1
3.650 - 3.800 Mc Antenne 2
73's, Evert PA2KW
__
Elecraft mailing list
Home
We all now (i guess) that decoding below the noise floor needs:
Time, timing and repetition..
no formulas needed .
73's, Evert PA2KW
-Oorspronkelijk bericht-
Van: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net]
Namens Joe Subich, W4TV
Verzonden
things, but
I guess I need a hint now.
Did not change any settings (as far as I know).
Any suggestion?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
to say in the first message that the Test signal button did work
(K3 TX and modulating so giving output)
I remember trying to click the LED's next to TX VOICE/DIGITAL as they
were not green.
Thanks again.
73's, Evert PA2KW
-Oorspronkelijk bericht-
Van: Elecraft [mailto:elecraft-boun
and DX-ing, not to MS $$$ versions.
If I buy a new system, I will get the next generation of MS possibilities and
problems.
Anyway, I do appreciate the help of an expert! Thanks.
73's, Evert PA2KW
__
Elecraft mailing list
Home: http
Just a short question,
Anyone around here who has got the manual of the G800SDX Yeasu Rotor?
PLease respond off list
73's, Evert PA2KW
Sri for the bandwidth
.
__
Elecraft mailing list
Home: http://mailman.qth.net
Thanks for all responses. Great!
-Oorspronkelijk bericht-
Van: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Namens Evert Bakker
Verzonden: woensdag 6 augustus 2014 10:32
Aan: elecraft@mailman.qth.net
Onderwerp: [Elecraft] off topic
Just a short question,
Anyone around here who has
feeling. But
after 2 years I feel ashame for my bad CW. I have to accept that I'm not
going to learn it the new way anymore
Can anyone tell me if there is a setting somewhere to solve this which I
overlooked.
Thanks in advance.
73's, Evert PA2KW
Hello Wayne,
Good news!
Will it be possible to split TX and RX functionality between the homeK3
(TX) and the remote K3 (RX) in a setup where the RX controls on the home
K3 are used as the frontpanel for the remote K3 ?
Just want to use my second K3 for remote listening.
73's, Evert
This happens as well when you switch bands :-(
73's, Evert PA2KW
I notice that if I select DATA A mode and set the bandwidth to, say, 1.5
kHz, then rotate the B VFO through the several data modes, upon returning to
DATA A I have to readjust the bandwidth control once again
this problem?
FW 3.79 / DSP 2.54
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Elecraft's effort and my money.
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
to install this RXA mod pcb on the new KXV3A board?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Just tried working PSK 31 (Data Mode) but can't work split. Used the AB tap
twice to copy all info to VFO B.
Am I doing something wrong here or did I run into a firmware issue? I did
use the XIT, which works.
I used the paddles to generate PSK.
FW = 3.66
73's, Evert PA2KW
Is Elecraft closed these days? (Vacation)
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Hi Don,
Thanks.
I understand, they need their rest to get ready for the next surprises :-)
You know, when I've got vacation, I want to spend (a lot of) money . :-)
I'll wait patiently then.
73's, Evert PA2KW
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent
..)
I'm really puzzled.
I thought I might give it a try here.
If you feel it's OT, contact me direct.
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
off,
Running 80 W
I used my second K3 to listen to my own signal.
During transmitting (10.118) I turned the Main RX dial and when moving away
from 10.114 the effect disappeared gradually. When moved 5Kc up or down it
was gone.
Any clue?
73's, Evert PA2KW
Hello Julian,
In the past (2x), but not lately.
I might do this again.
I'll first check it tomorrow and see if the problem is still there.
Thanks for the reply!
73's, Evert PA2KW
Julian wrote:
Have you tried a VCO calibration
issue will be solved once and the K3 will be perfect (for me).
Some issues will be solved, some never. Nothing is perfect, but the K3 comes
close.
Do whatever you like with this information, it is just my experience and
opinion
73's, Evert PA2KW
will be.
Thanks for the reply!
73's, Evert
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of pd0psb
Sent: Sunday, November 08, 2009 21:57
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Elecraft
Evert,
There's a small LPF
Larry,
If your ears go beyond 16 Kc, you won't be pleased.
73's, Evert PA2KW
But then I saw the Pro Set K2 on the web site.
Any body using one on a K3, as well?
de K2GN/Larry
K3 - S/N 3278
__
Elecraft mailing list
Home: http
is something done by a person, not by technological possibilities.
Just my opinion
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
to the receive antenna causing damage.
How can I use the Sub-RX connected to the receive antenna on the AUX-RF port
and have the audio of the Sub-RX in both ears (without hearing the main
receiver)?
73's, Evert PA2KW
__
Elecraft mailing
I was playing with HRD this afternoon and when swapping bands I ended up on
14 Mc in LSB mode..
I've been trying to get it on USB again but I'm missing something I guess
(and didn't even have a beer this afternoon.)
Where can set the proper mode again?
73's, Evert PA2KW
Problem solved. I think the LSB mode is somewhere disabled for 14 Mc.
By toggling the mode (up) I didn't get the USB Mode. (For some unknown
reason I'm always toggling up until I get what I want).
By toggling down I did get back the USB mode.
Wheird
73's, Evert PA2KW
Hello Don,
It was the software (HRD) that did it for me.
But it's good to see that at the end WE do have control over the radio :-)
73's, Evert PA2KW
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Sunday, September 13, 2009 18:13
To: ev...@pa2kw.com
Cc
Hello,
A friend of mine is considering the purchase of a XV144.
Is there somebody out there who wants to sell his XVRT?
Please let me know (of list).
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net
Hello Ralph,
It is a known issue and can be solved easily.
I'll send you the document directly (which is on the Website as well).
73's, Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ralph
Sent: Saturday
1.2.1.6
Any suggestions?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Tnx Lyle,
It is.
73's, Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle Johnson
Sent: Thursday, July 30, 2009 22:05
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 TX FM
It looks like I'm not able
Thanks James,
It's 5 (Kc).
I really have no clue so far what it could be.
73',s Evert PA2KW
_
From: James Sarte [mailto:k2qi@gmail.com]
Sent: Thursday, July 30, 2009 22:52
To: ev...@pa2kw.com
Cc: Lyle Johnson; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 TX FM
is very unstable in relation to the FP temperature and
PLL2 much less.
I do have a second K3 and see PLL1 at 7.3 on 28Mc (coming anxiously close to
7.5).
Anyone a clue where to look or what to do?
73's, Evert PA2KW
__
Elecraft
Hello Brett,
Your question:
Is it normal for the right side to run quite a bit warmer after installation
of the KRX3.
I did notice the same effect. I asked support and they confirmed it as
something normal. (I didn't expect that increase in heat production as
well).
73's, Evert PA2KW
Great news about the K144XV!
I just wonder if the K144XV has the possibility to separate the RX input
and TX output and are separately available at the back panel?
(A lot of VHF Dx-ers use only 1 relay, the one in top of the tower, where
the preamp is installed as well.)
73's, Evert
Great news about the K144XV!
I just wonder if the K144XV has the possibility to separate the RX input
and TX output and become available at the back panel?
(A lot of VHF Dx-ers use only 1 relay, the one in top of the tower, where
the preamp is installed as well.)
73's, Evert PA2KW
hear, it gave me the idea that
the word hiss may be not the right word for the phenomena I wont to share
we you. But I'm not able to make it clearer then I tried so far.
I can also say that it is not a pure additional sidetone but it's a
combination of several components.
73's, Evert PA2KW
Hello Barry,
I will try. I saw some recording programs lately on the reflector.
I'll try to find them and install it.
W'll keep in touch.
73's, evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry N1EU
Sent
to listen to.
I'm right now at the point of testing with an audio analyzing software tool
and will report.
The question now is, what can we do about it?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Are we (dutch) all using the same version of Heil headset?
I never noticed this high hiss with my old Telex headphones (with a smaller
freq-response I guess)
73's, Evert PA2KW
-Original Message-
From: Steve Ellington [mailto:n...@carolina.rr.com]
Sent: Sunday, April 05, 2009 19:48
can help me (us) out.
73's, Evert PA2KW
-Original Message-
From: Jack Brindle [mailto:jackbrin...@earthlink.net]
Sent: Sunday, April 05, 2009 21:55
To: ev...@pa2kw.com
Cc: 'Maarten van Rossum'; 'Elecraft Group'; 'Gary Surrency'
Subject: Re: [Elecraft] My K3's hissy and noisy audio
I
kind of controls (RX-EQ, AGC-SLP/THR, AGC-S/F, AGC ON/OFF)
and there is no difference whatsoever!
I apologize for being persistent in this.
73's, Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent
running again and see if the effect is
also there (I just guess not).
Thanks in advance
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Up to now I seem to be on my own with this problem. I did test it with my
old TR7 and had no problem.
I think I'll ask support to see if they have any clue.
Thanks
73's, Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
In the contrary,
Service is: SUPER .!.
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Thanks Dave,
Easy to forget something, but both are the same, ATT=OFF, PRE=ON
I just tested it on all bands: same results on all bands.
(May be only S-meter offset if possible ?)
73's, Evert PA2KW
_
From: David Gilbert [mailto:xda...@cis-broadband.com]
Sent
-RX on the higher bands together with the main RX with
the same antenna and accept an increase of the NF by 3 dB.
Do I need the AUX RF BNC installed?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
did a quick check on several config items, but didn't see anything
strange.
Please has any body a clue?
Is it possible to copy all user parameters from one K3 to another (except
calibration parameters off course)?
73's, Evert PA2KW
Subject: Re: [Elecraft] K3 CW/MIC problems
VOX on ?
Problem solved
73's, Evert PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Disabling TX-ing can be done by TX-TEST mode, so which specific situation
requires disabling the VOX in CW mode?
Just curious, no more
73's, Evert, PA2KW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Hello Dave,
I must have been sleeping ...
I use FSK-D now and all works fine.
I just use it for hunting DX-peds. Just wkd K5D on 18Mc RTTY using the
internal CW to RTTY decoder.
Thanks for waking me up.
73's, Evert PA2KW
_
From: David Yarnes [mailto:w7...@cox.net]
Sent
I have firmware version 2.67/1.96.
In this version it is still not possible to use CW to RTTY when using SPLIT.
Has this been fixed in the newer firmware version?
I now use XIT, but this is not so powerfull.
73's, Evert PA2KW
Hello,
During the initial calibration test, one is asked to set CONFIG:KXV3 to
TEST. This one is not available (just NOT INST and NOR).
What am I doing wrong?
73's, Evert PA2KW
__
Elecraft mailing list
Home: http
Thanks! It works!
-Original Message-
From: Gary Hvizdak [mailto:garyhviz...@cfl.rr.com]
Sent: Friday, February 13, 2009 12:45
To: elecraft@mailman.qth.net
Cc: ev...@pa2kw.com
Subject: RE: [Elecraft] K3 KXV3 mode
On Fri Feb 13 06:20:26 EST 2009 Evert Bakker (PA2KW) wrote ...
During
) into a 50 Ohm dummy (using a professional one).
And now: What to do if I have a difference between the commanded (5W) output
and the measured output (say 7W) ???
Thanks in advance.
73's, Evert PA2KW
__
Elecraft mailing list
Home
Lance,
This is the only proper way for serious VHF stations. Use your feedback
contact of the final RX/TX coaxial relay (which is most probably mounted in
the top of your tower) as a final go for the RF out of the K3 by using the
TX-Inhibit Line.
73's Evert PA2KW
Cu
-Original Message
. On these bands it's
sometimes better to switch the preamp off.
73's Evert PA2KW
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of DOUGLAS ZWIEBEL
Sent: Monday, December 15, 2008 17:15
To: Elecraft Reflector
Subject
Looks like I run into a bug (version 2.67).
When the CW delay is activated by pushing the with the speed/mic (digital)
potentiometer, the AF potentiometer isn't working.
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
it on
the display. The CW-delay with the digital potentiometer works as expected
and as before.
BTW: I had the QSK set at SEMI (now and before)
Was this an intentional change?
73's, Evert PA2KW
PS latest version of HRD and K3 firmware works at good speed now (a question
from me a couple of weeks
Thanks to all who replied and gave me info what to do.
Next weekend I hope I'll be able to try things out.
73's, Evert PA2KW
-Original Message-
From: Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 16, 2008 23:13
To: [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Subject
to
synchronize.
Any ideas?
I want to use a Micro Keyer 2 (Microham) in the near future, have a logbook
program with integrated DXcluster and Digimode modules.
Any suggestion?
As it is not only a strict K3 question, please mail me directly if you can
help me.
Evert PA2KW
. EC2 40,- Euro, KIO2 70,- Euro together 100,-
Euro.
Also available 2x new ETS15 tilts (7,50 Euro each), and a new tuning knob
with finger dimple (12,50 Euro).
Buyer pays shipping
Please contact me off line if interested.
73's, Evert PA2KW
I got the question from someone:
Is your K2/100 upp to latest version, revision, firmware...
Where can I find..How do I check?
I've got K2-SN4836
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Wim,
If 1 dB noise figure is the aim, I would make one myself (sure better NF,
most probably cheaper).
73', Evert PA2KW
Active on 144
Preamp NF 0.15 dB (MGF1302 - YU1AW design)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Enno, PF5X
Sent: Monday
ACS, would be nice (used it for the last 20 yrs)
Low priority (to me), I'm sure there are more important issues
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Hi Mike,
Yes I did not read your message carefully enough.
I had a similar problem as I wrote, but that wasn't in the tune mode.
Your problem has been solved easily :-)
I'll try solving my problem again next weekend.
Thanks for e-mail!
73's, Evert PA2KW
-Original Message-
From
Thanks to all who responded,
I just worked 2 station on RTTY (my first -:) )
You just have to get used to it, but for now and then is OK.
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Evert Bakker (PA2KW)
Sent: Sunday, June 01, 2008
.
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
that it is RF detection at the selection diode of the power
potentiometer. Turning the power knob CCW to a certain extend would even
INcrease power!
I'm all ears to hear how you solve this.
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
That's what I hear as well.
73'e, Evert PA2KW
---
I don't hear a birdie on that frequency, but centred around there is a
broad peak of rasping noise and transient carriers that only appear
while rotating the VFO A knob
I do!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of G4ILO
Sent: Sunday, May 25, 2008 22:06
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 10M Birdie
What's the big deal with birdies? Perhaps if you are operating from the
middle of nowhere
You can add me to the list of persons that would like to see that feature. I
do have the CMOS Super Keyer 1 as well and it's hard to get it right after
15 years of operating and suddenly missing ACS.
No top priority, but I would like to drop a separate piece of equipment.
73's, Evert PA2KW
is not required
Any suggestion?
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
I just want to avoid confusion:
With loss I do not mean insertion loss of the filter (it can even be
compensated with FLx GN) but information loss due to reduced BW.
Sorry for the BW :-)
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
Thanks Knut, Lyle, Don, Steve and Bill,
It must have become clear that I'm a CW operator and was used to SHIFT/WIDTH
already :-). SSB, different mind set eh
I will check the hiss item and learn more.
Thanks for support and info!
73's, Evert PA2KW
BTW, a vary happy K3 user!
It's the first
Dick,
You are is correct!
I had (still have) the same flipped Fan panel.
I'm glad it's the back-side
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dick Roth KA1OZ
Sent: Saturday, May 10, 2008 18:53
To: Elecraft Reflector; K3
.
73's, Evert PA2KW
Drake TR7/R7
K2-SN4836
K3-SN0812
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
automatically from 2.7 Kc (FL2) to 13.0 Kc (FL1)? At least the display still
says FL2. Are the slopes of the DSP so much steeper?
Is it possible to upload an earlier version?
Thanks, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft
.
Was this on purpose?
Thanks, Evert PA2KW
PS:
Downloaded the newest utility program and Prolific driver for Elecraft KUSB.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hello Don and others
Thanks. No, I haven't got the sub-RX.
I'll wait for the first movers experience (advantage? :-) )
73's, Evert PA2KW
K2-SN4836
K3-SN0812
-Original Message-
From: Don Ehrlich [mailto:[EMAIL PROTECTED]
Sent: Friday, May 02, 2008 22:24
To: [EMAIL PROTECTED
in advance.
73's, Evert PA2KW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thanks to all who responded!
Problem solved, K3 running (10W)
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Evert Bakker (PA2KW)
Sent: Thursday, May 01, 2008 13:10
To: 'Elecraft Reflector'
Subject: [Elecraft] K3 TCXO calibration
of a proper RF relay.
You can't blame home-brewers of amplifiers who has to search for reasonable
priced HIGH power relays.
That's a group of people who were respected by Elecraft builders, isn't it?
73's, Evert PA2KW
--
Don't complain. Nobody will understand. Or care. And certainly don't
I agree an inhibit pin is a very good idea.
Thanks a million for the developers for giving this inhibit possibility.
This makes serious VHF high power applications possible.
Don't remove this option please!!
THANKS
(waiting for my K3 as the IF stage for my VHF station)
73's, Evert PA2KW
OPT1. I will send you a picture of the WSJT audio response next weekend. I
did not make a compromise as far as I'm aware of.
Please send me an e-mail directly with the picture (evert at pa2kw dot com).
I'v been extremely active on 144 MS (using high speed CW from 200 LPM up to
2500 LPM and later
Hi Mike and Lenny,
Using FSK441, don't change the tones (as far as I know you can't).
Just tune in for the RX signal and the DF will show you how to tune in on
your partner. From then on it should be OK.
73's, Evert PA2KW
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
1 - 100 of 139 matches
Mail list logo