Re: [Elecraft] Afsk a

ct: Re: [Elecraft] Afsk a Paddle input is only available in PSK-D and FSK-D data submodes. DATA A and AFSK are only for soundcard generated data. 73, Don W3FPR On 3/1/2017 1:33 PM, mar...@the-wallers.net wrote: > Hi, > > Can you help me please? > > I was playing with data modes the

Re: [Elecraft] Afsk a

Paddle input is only available in PSK-D and FSK-D data submodes. DATA A and AFSK are only for soundcard generated data. 73, Don W3FPR On 3/1/2017 1:33 PM, mar...@the-wallers.net wrote: Hi, Can you help me please? I was playing with data modes the other day and my kx3 was happily sending

Re: [Elecraft] Afsk a

The KX3 never accepted paddles input to send RTTY using DATA sub-mode AFSK A. You must select sub-mode FSK D to use this feature. Read the manual on Data modes. Sent from my iPhone ...nr4c. bill > On Mar 1, 2017, at 1:33 PM, "mar...@the-wallers.net" > wrote: > >

[Elecraft] Afsk a

Hi, Can you help me please? I was playing with data modes the other day and my kx3 was happily sending rtty in afsk a mode using the morse paddle. Today it no longer accepts input from the morse paddle in afsk mode but does in other data modes. I have a feeling I've changed a setting

Re: [Elecraft] AFSK-A with K3s

On 4/20/2016 2:29 PM, Gary Smith wrote: Now I have the K3s set to use AFSK A so that I don't need to have additional hardware/connections and no longer use the paddles to send, only MMTTY. When I use MMTTY I have to have the PTT-KEY set to OFF-OFF. When I switch to N1MM I have to have it set

Re: [Elecraft] AFSK-A with K3s

So? On 4/20/2016 10:22 AM, Nr4c wrote: This is not AGSK A mode. It is FSK D. Sent from my iPhone ...nr4c. bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] AFSK-A with K3s

Yes, my problem was not when sending RTTY with a paddle, it was when using MMTTY and I was trying to send FSK. All I could hear was one tone, not the two tones of mark space. I thought it was nice not to hear the two tones when listening. I did not realize I could not properly key the K3s

Re: [Elecraft] AFSK-A with K3s

This is not AGSK A mode. It is FSK D. Sent from my iPhone ...nr4c. bill > On Apr 17, 2016, at 9:38 AM, Triconet_2 wrote: > > You and at least two dozen guys I logged doing something similar And I would > venture to guess that most of them were running K3s. > > I

Re: [Elecraft] AFSK-A with K3s

You and at least two dozen guys I logged doing something similar And I would venture to guess that most of them were running K3s. I emailed one of these guys and got back the confession that 1) yes he was using a K3 and 2) he was sending radioteletype with the paddle. The inadvertent

Re: [Elecraft] AFSK-A with K3s

Mike, This was a very timely thread for me in that I have been trying to get MMTTY working with the K3s and missed any contacts with the FT4 on RTTY and only made a RTTY Q with the VK0 because I used the memories in the K3s to send RTTY via FSK, not MMTTY. In fact, what I was transmitting

Re: [Elecraft] AFSK-A with K3s

OK, I think I have it straight now. Thanks to all, and especially to Gene, N9TF who emailed me off-list. For the benefit of all, here is what I learned today: I _do_ need to turn on VOX if I want to use a logging program that grabs the USB control port (COM5 in my case). I had MMTTY set up to

Re: [Elecraft] AFSK-A with K3s

Various people wrote: VOX on? You need some way for MMTTY to switch the K3S between receive and transmit. Sigh Please excuse my frustration. My original posting was clear: MMTTY _is_ putting the K3s into transmit and _is_ sending tones to the built-in sound card. I can hear the tones

Re: [Elecraft] AFSK-A with K3s

You've run into a common problem: poor reading comprehension. On 4/13/2016 9:26 AM, Mike Dodd wrote: Various people wrote: VOX on? You need some way for MMTTY to switch the K3S between receive and transmit. Sigh Please excuse my frustration. My original posting was clear: MMTTY _is_

Re: [Elecraft] AFSK-A with K3s

Make sure the TX mark frequency in MMTTY is the same as what you've chosen in the K3. On 4/13/2016 7:11 AM, Mike Dodd wrote: Thanks to all who replied off-list to my question about choosing a Mark frequency. Now on to a new question Last night I was receiving RTTY using MMTTY and the

Re: [Elecraft] AFSK-A with K3s

VOX on? 73, Fred K6DGW - Northern California Contest Club - CU in the Cal QSO Party 1-2 Oct 2016 - www.cqp.org On 4/13/2016 7:11 AM, Mike Dodd wrote: Thanks to all who replied off-list to my question about choosing a Mark frequency. Now on to a new question Last night I was receiving

[Elecraft] AFSK-A with K3s

Thanks to all who replied off-list to my question about choosing a Mark frequency. Now on to a new question Last night I was receiving RTTY using MMTTY and the AFSK-A mode on the K3s. This morning I am trying to get the K3s to transmit, but not having much luck. I'm using the internal

[Elecraft] AFSK A anomaly?

I played a bit in the RTTY RU this weekend with my new-to-me K3 to learn the operation and iron out any kinks in my setup. Everything worked well except for a problem (?) on receive. I was able to easily tune in signals and copy using MMTTY, but when I tuned to the other side of zero beat I

Re: [Elecraft] AFSK - PSK problem

During the WPX RTTY contest this weekend I have noticed that my K3 will jump from AFSK A to PSK D. It happens whenever I change bands. The data sub-mode is stored per band. In addition if you use M0-M9 as quick band change memories, the data sub-mode is stored/recalled from those memories.

Re: [Elecraft] AFSK - PSK problem

will be done and you won't get err msg when trying to go split. This is for K3 without Sub-receiver. With KRX3, I know nothing! ...bill nr4c -Original Message- From: Joe [mailto:j...@k2uf.com] Sent: Sunday, February 13, 2011 10:32 PM To: elecraft@mailman.qth.net Subject: [Elecraft] AFSK

[Elecraft] AFSK - PSK problem

During the WPX RTTY contest this weekend I have noticed that my K3 will jump from AFSK A to PSK D. It happens whenever I change bands. I know it happens at other times but did not note the circumstances during the contest. Anyone else notice this? Any ideas? Other than this my

Re: [Elecraft] AFSK - PSK problem

Joe, The mode/submode are per band settings. If you did not have your Data Mode set to AFSK-A fo all bands that you would be operating using AFSK, then the results are as to be expected. In other words, preset the mode and submode prior to a contest. 73, Don W3FPR On 2/13/2011 10:32 PM,

[Elecraft] AFSK

I'm unable to transmit an AFSK signal in DATA mode, although I can transmit via the same LINE IN in DATA A mode. The line output from my SignaLink USB soundcard does have the audio signal on it and is connected to the Line In mono jack on the K3. For MIC SEL in configuration, I have Line In

Re: [Elecraft] AFSK

Is MMTTY set to transmit 915 Hz? Wes N7WS --- On Fri, 12/17/10, Larry K1UO k...@uninet.net wrote: From: Larry K1UO k...@uninet.net Subject: [Elecraft] AFSK To: elecraft@mailman.qth.net Date: Friday, December 17, 2010, 10:51 AM I'm unable to transmit an AFSK signal in DATA mode

Re: [Elecraft] AFSK

Wes is correct. Please make sure you check: 1. Baud rate on the K3 should be 45 (if that is what your software is using) 2. If you have the mark freq set to 915 Hz (pitch) on the K3 then your soundcard software for RTTY must also be 915 Hz. 73 Greg AB7R On Fri, Dec 17, 2010 at 9:51 AM,

Re: [Elecraft] AFSK

All fixed.. The only thing I did was reload my saved options file in MMTTY and all is well again!! Somehow something got scrambled. 73 Larry K1UO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] AFSK A RTTY with VOX?

Thanks for several on- and off-list responses. Yes indeed, my VOX gain was still sitting at 0.00 and cranking it up a bit took care of the problem. I had done a search for VOX related entries in the CONFIG menu but failed to check the MENU menu. My bad. The idea that the tones from the

[Elecraft] AFSK A RTTY with VOX?

Is it possible to have VOX control over transmission while in the AFSK A mode on RTTY and using the Line In jack for audio from the soundcard? I tried unsuccessfully to do this in the recent RTTY Sprint using MMTTY. I finally had to use HRD with DM780, which I assume was controlling the T/R

Re: [Elecraft] AFSK A RTTY with VOX?

The answer to your question is yes, certainly. You have to adjust the VOX gain high enough so that the LINE IN audio will trigger it, which might be different from the level you use with your microphone. With the line levels I am using here, I get 4-5 bars of ALC indication with the Mic gain

Re: [Elecraft] AFSK - K3 - SignaLink USB

...@mac.com Subject: Re: [Elecraft] AFSK - K3 - SignaLink USB To: Elecraft Reflector elecraft@mailman.qth.net Message-ID: 3597f80a-718d-4f36-8d97-ca5c6daff...@mac.com Content-Type: text/plain; charset=us-ascii If you look at the schematic of the SignaLink, you'll see that it is redundant to what

Re: [Elecraft] AFSK - K3 - SignaLink USB

You will also see that other than the audio derived PTT that is unnecessary with the K3, the functions of SLUSB can be performed better (e.g. stereo receive) and at a lower cost with a sub-$20 CM108 based USB dongle like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004 The

[Elecraft] AFSK - K3 - SignaLink USB

Ladies and Gentlemen I just got my K3 back from Aptos. I had some issues with the unit that were repaired and all the mods were put into place. Things have changed for my AFSK setup and wonder if others are seeing this. I am now having to drive the SignaLink USB full TX to get any ALC

Re: [Elecraft] AFSK - K3 - SignaLink USB

Yeah, mine's always been like that. There is a jumper in the Signalink that will make the problem a bit better, but still I have to run with all the levels set high. It's always worked though and never prevented me from working plenty of digital contacts with a clean signal... 73, Dave.

Re: [Elecraft] AFSK - K3 - SignaLink USB

Lee... I have a fully fleshed-out K3 that I use with a SignaLink USB. The K3 is about 3 months old and was factory-built. I am running off a Dell XPS-420 (WIN 7 Ultimate (32 bit)) and FLDIGI 3.12.5 -- with this set-up, I run the TX pot about 9 O'Clock, the RX pot at noon, and my line

Re: [Elecraft] AFSK - K3 - SignaLink USB

Lee, As far as I know, none of the K3 mods chanded the Line-in on the K3. Has anything changed on your Signallink or on your computer? 73, Don W3FPR Lee Buller wrote: Ladies and Gentlemen I just got my K3 back from Aptos. I had some issues with the unit that were repaired and all the

Re: [Elecraft] AFSK - K3 - SignaLink USB

. Wolf From: Lee Buller k...@swbell.net To: Elecraft Reflector elecraft@mailman.qth.net Sent: Wed, June 30, 2010 8:02:36 PM Subject: [Elecraft] AFSK - K3 - SignaLink USB Ladies and Gentlemen I just got my K3 back from Aptos. I had some issues

Re: [Elecraft] AFSK - K3 - SignaLink USB

From: Lee Bullerk...@swbell.net To: Elecraft Reflectorelecraft@mailman.qth.net Sent: Wed, June 30, 2010 8:02:36 PM Subject: [Elecraft] AFSK - K3 - SignaLink USB Ladies and Gentlemen I just got my K3 back from Aptos. I had some issues with the unit that were repaired and all the mods

Re: [Elecraft] AFSK - K3 - SignaLink USB

If you look at the schematic of the SignaLink, you'll see that it is redundant to what is already built into the K3. In addition, the K3 has a stereo audio out interface, facilitating the use of software for AFSK that recognizes dual RX for split frequency DX chasing.

[Elecraft] AFSK 75 bps by Default

Hello, I have noticed since last firmware 3.97 upgrade, when AFSK is selected (also if is from a memory)it starts at 75 bps by default, not a hard job but you have to change it to 45 bps (normal use here) every time you use RTTY, it will be more convenient to default to 45 bps or choose which one

Re: [Elecraft] AFSK 75 bps by Default

I have noticed since last firmware 3.97 upgrade, when AFSK is selected (also if is from a memory)it starts at 75 bps by default I find in AFSK as well as FSK that it is at the last used rate, 45.45 or 75 bps. This is using MCU 4.03/DSP 2.60 (the latest Beta), and selecting mode from the

Re: [Elecraft] AFSK 75 bps by Default

at a time didn't change the default to 75 bps. Wes --- On Tue, 6/22/10, Lyle Johnson k...@wavecable.com wrote: From: Lyle Johnson k...@wavecable.com Subject: Re: [Elecraft] AFSK 75 bps by Default To: elecraft@mailman.qth.net Date: Tuesday, June 22, 2010, 6:16 AM I have noticed since last

[Elecraft] AFSK 75 bps by Default

I have noticed since last firmware 3.97 upgrade, when AFSK is selected (also if is from a memory) it starts at 75 bps by default I find in AFSK as well as FSK that it is at the last used rate, 45.45 or 75 bps. This is using MCU 4.03/DSP 2.60 (the latest Beta), and selecting mode from the

[Elecraft] AFSK in DATA A mode

When you first select AFSK the filters will be set to dual pass-band with narrow widths. Tuning is sharp. The tone pitches are set in the CONFIG menu, I believe. You can change the filter setting to anything you want. My K3 will not transmit PSK31 in LSB/USB, just a steady tone. (I do have

[Elecraft] AFSK A not working, while DATA A is!?

Hi, Most of my operating time, I do CW, but sometimes I do some RTTY QSOs. Today, after what must have been a couple of months, I felt an urge to fire up MMTTY again, so I tweaked the necessary controls on my K3 and on my PC soundcard. But no transmit output?! The PTT is asserted and the

Re: [Elecraft] AFSK A not working, while DATA A is!?

Hi Frank. Make sure the mark tone frequency your software is set up for matches the mark tone frequency the K3 is set for. In AFSK-A mode, use the PITCH button (i.e. press and hold the SPOT button) to check and set the AFSK mark frequency. See the section titled Mark/Shift and Pitch

Re: [Elecraft] AFSK A not working, while DATA A is!?

AFSK A and DATA A both transmit the same on mine. Using HRD here. I don't have the solution, but you are correct in that your K3 is not operating properly. 73 Bob -- View this message in context: http://n2.nabble.com/AFSK-A-not-working-while-DATA-A-is-tp4549740p4550024.html Sent from the

Re: [Elecraft] AFSK A not working, while DATA A is!?

Hi Bob, Thanks for your e-mail. Kok Chen emailed me privately with the cause of the problem: AFSK-A requires that you to use the same transmit tone pair on your sound card as in the rig. I.e., if you set the rig to use the 2125/2295 tone pair, your software needs to also use that tone pair.

Re: [Elecraft] AFSK A not working, while DATA A is!?

HI Frank, I just love the K3 community. You can always find an answer. That's why mine is working, as the tone pairs match. Now I have the challenge of getting this LP-Pan working. 73 - Bob -Original Message- From: Frank R. Oppedijk-2 [via Elecraft]

[Elecraft] AFSK vs. FSK

As I recall from my 1960's USAF military electronics days, tests were made comparing FSK versus the then new AFSK. The result was that at the receiving end both were equal, and you could not tell which mode was being used. Vy 73, Bob DJ0MBC/WU5T

[Elecraft] AFSK

I'm unable to transmit an AFSK signal in DATA mode, although I can transmit RTTY in LSB mode. The line output from my computer soundcard does have the audio signal on it and is connected to the Line In mono jack on the K3. For MIC SEL in configuration, I have Line In selected. DATA MD is set

Re: [Elecraft] AFSK on K3

Bob- Make sure you have the latest firmware. Up until the recent release there were problems with the Line In. One problem was that although you had Line In selected, it really wasn't selected unless you went in to the menu and selected another input and the re-selected Line In. I would

Re: [Elecraft] AFSK on K3

Make sure you have the latest firmware. Up until the recent release there were problems with the Line In. One problem was that although you had Line In selected, it really wasn't selected unless you went in to the menu and selected another input and the re-selected Line In. I would try

Re: [Elecraft] AFSK on K3

Thanks Ed but, yes I do have the latest firmware. And the MIC SEL had been changed several times between rP.H (for SSB) and Line In (for AFSK). Again, the Line In selection works if I transmit AFSK in LSB mode. But no modulation when in DATA mode. I just ran some tests here. The K3 data

Re: [Elecraft] AFSK on K3

I just ran some tests here. The K3 data modes called DATA A and DATA A REV are working in transmit with LINE IN and should work with any soundcard mode, including AFSK. The K3 data mode called AFSK appears to not be working properly in transmit. Unfortunately, DATA A doesn't work very well