It's been a privilege to own such a fine radio but I'm selling due to waning
interest and a need to reduce possessions.
K3/100 S/N 764 2012 ITEM
PRICES SHOWN for reference:
Perfect condition / non-smoking / never portable or mobile
low mileage /
That is a K2 at a bargain price. For any who may be concerned about
the dial calibration, I invite you to visit my website www.w3fpr.com
article on K2 Dial Calibration. I would recommend that the KSB2 option
be made functional before aligning the KSB2 filters.
73,
Don W3FPR
On 8/1/2012
I recently purchased this K2/10 (S/N 1848) from the original owner/builder. It
is built with very good craftsmanship, and includes the noise blanker and 160-m
modules. Additionally, a partially built (90%) SSB module and an unbuilt ATU
module is included. The ATU module is missing several
Elecrafters,
FOR SALE: K2/10 Serial Number 1930.
This unit is equipped with a KAT2
antenna tuner and a KNB2 noise blanker. It is configured for the KSB2 sideband
option, but the KSB2 accessory is not present.
This is a revision A board and is equipped with version 1.06f firmware.
It is in
I have for sale a KX3 Transceiver, Serial # 7XX.
Includes:
KXFL3 Dual-Passband Roofing Filter
KXUSB USB Interface Cable
MH3 Hand Microphone for the KX3
Tenergy NIMH AA cell. 2500 MAH 10 ea
E850524 KX3 Pwr Cable 18AWG Rt Angle
Lowepro Camera Bag for KX3
Chill Pill Mobile Speakers (NEAT) Stereo
This is assembled and has never been used on the air. The unit was
professionally built by JFI Electronics at the University of Chicago.
All has been tested and is working. The last steps to be completed are
putting together the power cable and final alignment (pages 52 and 53 in
the
I have a KPA500 built in January 2011 for sale. $1800 plus shipping or will
meet a reasonable
distance from Durham, NC
Larry K1ZW/4
Durham, NC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I forgot to mention the K3 aux cable set is included
Larry K1ZW/4
Durham, NC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
K2/100: S# 6603, KAF2,KAT100
Asking $800, plus shipping and will include qrp cover as well.
Radio used mainly for cw.
Clarence, KH6G
__
Elecraft mailing list
Home:
My K2/100 kit was purchased new in Jan. 2012. I am the original owner. It has
just been completed and is in mint condition. The S/N is 7274. It has been
aligned, calibrated and tested by Don Wilhelm-W3FPR.It includes the following
options; KPA100 (100 watt amplifier), KSB2 (SSB), K160RX (160m),
I have an Elecraft KX1 for 40-30-20 meters (KXB30 installed for 30 meters).
- KXAT1 autotuner also installed.
- an unbuilt KXB3080 30M/80M adapter is included.
Also included are the following items:
- Whiterook MK-44 paddle cable
- Koss earbuds
- Dual binding post to BNC adapter
- Fiberglass
*Aha..found the fix...didn't know I was subscribed.
Gee, I must be gettin too darn old for this stuff. Seems I can't remember
anything I do anymore...:-)
73
Gary
*
--
Gary
VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679,P3 #1629, KPA-500 #018 KAT-500#??
Living the dream!!!
40-30-20 meter Elecraft KX1 with KXAT1 and KXB30 installed.
- Unbuilt KXB3080 30M/80M adapter included.
also included are the following:
- Whiterook MK-44 paddle cable
- Koss earbuds
- Dual binding post to BNC adapter
- Fiberglass hard case with foam
All for $425 including shipping CONUS.
144OPT100
K144XV Panel Kit for K3 /100
free
ea.
1
free
K144RFLK
K144XV REFLOCK
$89.95
ea.
1
$89.95
K144XV-F
K3 Int. 2 M Module; Assm.
$349.95
ea.
1
$349.95
K3/100-F
K3 100W Xcvr. (Assembled)
$2249.95
ea.
1
$2249.95
K3SSKT
K3 Stainless H/W Kit
$19.95
ea.
1
$19.95
KAT3-F
K3
Missed the mic, add;
MH2 Hand Microphone (For the K3/K2) $59.95
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Heil Gold Line Mic GM-4w/ wide and narrow elements $100.00
Heil ProSet Plus Dual Headset w/ wide and narrow elements A/B Phase Reverse –
$100.00
Heil PL2T Topless Boom, w/counterweight clamp, cable hides in boom -
$75.00
Heil CC1-K 6’ Mic Cable adapter for Elecraft,
Rick reports that this K3 has been sold. I was a day late. :-(
Bob, W7KWS
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-Factory-assembled-K3-and-accessories-tp7456877p7479313.html
Sent from the Elecraft mailing list archive at Nabble.com.
No takers yet, so reducing the asking price to $2,500.00.
===
Time to slim down the shack.
I have a K3 and the following accessories for sale:
- K3/100-F (K3 100W Transceiver- Assembled), SN 5586
- KAT3-F (K3 ATU Factory Installed)
- KXV3A (RX Ant.,
The covers have been sold. Thanks Mike!
73 de K6SBA
David in Santa Barbara, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Howdy Gang:
The KX1 I advertised for sale yesterday has been sold.
73, Joe W2KJ
I QRP, therefore I am
__
Elecraft mailing list
Home:
I have for sale a cover set for the K3, P3 and KPA500. These covers are
made by Pat of PYI Radio Covers and are some of the best covers made. They
are vinyl with a felt-like inner lining. The covers are basic black with no
logos, names, callsign, etc. The K3 cover has a cut out for the front
Time to slim down the shack.
I have a K3 and the following accessories for sale:
- K3/100-F (K3 100W Transceiver- Assembled), SN 5586
- KAT3-F (K3 ATU Factory Installed)
- KXV3A (RX Ant., IF Out and Xverter Interface)
- K144XV-100-F (2M Module for K3/100 Factory Installed)
-
Am selling my k2/100 S/N 7231 to fund a KX3. Imcludes KPA100, KSB2 and
KDSP2, Icom HM-12 hand mike . I had W3FPR do a checkout and alignment in
February. Completely up to date in every way.
Absolutely perfect condition, Asking $950 plus shipping. All manuals,
papers, probes, etc. Can bring to
The K2 is Sold. Thanks
-
r/ John N4NAB
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-K2-100-tp7414357p7415308.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
Hi everyone- Well the time has come to sell my station. I'm living in an RV
and the wife says it goes. Some I'm going to do 2M/440 until we are off the
road in 5-7 years. I have a K2/100 with the SSB, I/O, the Elecraft
microphone. Also included are an Astron 25A power supply with Anderson
Hi gang,
I have for sale three option modules for an Elecraft K2 transceiver, all of
which I bought from Elecraft in 2009 or later. The first module is a
not-yet-built KIO2 RS-232 Serial Interface kit, new and untouched, which I
will sell for $60. If you wish, I am willing to include an
Didn't really need this KAT100-1 when I ordered it, just had an urge to melt
some solder. 50+ year kit builder (non-smoker). Kit completed 12/2011 up to
the point of constructing the K2 interface cable and final alignment and tests.
Initial resistance measurements all good. All parts
I have for sale a QRP K2 that works great except for two problems. First,
the BFO range is restricted for some reason, which makes it impossible to
align the crystal filters properly. Second, there is a short between the 7
and 9 keys, such that pressing either of these keys has the same effect as
I neglected to mention that the for sale K2 includes the KAT2 internal
autotuner, which works properly. The K2's serial number is 6829.
On Tue, Feb 21, 2012 at 3:15 PM, Jeff n...@arrl.net wrote:
I have for sale a QRP K2 that works great except for two problems. First,
the BFO range is
FOR SALE:
(1) K2 QRP cover with KAT2 Internal ATU (two antenna connections) and KIO2
Serial Interface; $195 shipped CONUS.
(2) DL-1 20-watt dummy load; $17 shipped CONUS.
Contact of line, please - see email address below.
73,
Cary, K4TM
Lynchburg VA
h3c...@gmail.com
I have two Logikey keyers for sale:
- LogiKey K-5: Asking $80 w/shipping to CONUS (retails for $150)
- LogiKey CMOS4: Asking $40 w/shipping to CONUS (Kit retails for $90,
Assembled $125). This one was a kit and has Service Bulletins 1, 2, and
3 installed.
See
Hi
I have available for sale:
KNB2 - noise blanker kit (still in kit form and never assembled) along with the
instruction manual for $50 postpaid
KAT2 - auto tuner for the K2 - this one was built this past June or July and
used it for about a month until I got the KPA100. I have decided to
I am wanting a K3 and the wife says fine but you have to get rid of one of the
K2's so here goes K2/100 with Rev A to B ModsKSB2 ssb adapterK160RX 160mtr
adapter (Built but not installed)K2DSP2 DSP KPA100 shield updateKPA100
UpgradeAFGain ModMany other Elecraft Mods w/docs Not used much
all for $1500.00, UPS ground shipping
included.
You can contact me at rbout...@hotmail.com.
Thanks for looking, 73 Russ W9EL
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-Elecraft-K2-Complete-Package-Kits-still-in-box-tp7082372p7082372.html
Sent from the Elecraft
K144XV-F Internal 2 M 10w Module for the K3-F for the K3-F. Was installed in
a second K3 which had total operating time of less than 8 hours. Was removed
and repacked in the original packaging. Current list price is $489.90 with
with the KFL3B-FM 13 kHz FM filter. Will ship CONUS for $350.00.
Thanks all for the interest the LP-Pan and sound card are no longer
available.
Mike
VE3WDM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-sale-LP-Pan-and-Emu-0202-tp7050182p7060392.html
Sent from the Elecraft mailing list archive at Nabble.com.
For sale LP-Pan panadapter with
preamp excellant condition. Creative labs E-MU 0202 24-bit
192KHz USB 2.0 Audio Interface also in excellent condition. Price for both
200.00 plus shipping
If interested please contact off list
at ve3...@hotmail.com
Mike
K144XV-F Internal 2 M 10w Module for the K3-F for the K3-F. Was installed in a
second K3 which had total operating time of less than 8 hours. Was removed and
repacked in the original packaging. Will sell with the KFL3B-FM 13 kHz FM
filter for $425.00. Will ship UPS or USPS. Contact off list at
I am trying to make some room in a small shack and would like to sell the
following K1 with Built in tuner.$425 shipped to CONUS HyGain HamIV
controller (only) $150 Plus shipping ICOM IC22a (2mtr)with a bunch of crystals
Make Offer ICOM IC30 (440) with a bunch of crystals
I am selling K3/100-F, SN: 4086, for the widow of my dear friend K7RMT/5.
All proceeds go to widow. The radio build includes the following:
K3/100-F (Factory Assembled)
KAT3-F (ATU Factory Assembled)
KBPF3 (General Coverage RX Module)
KRX3-F (Sub Receiver)
KTCX03-1(TXCO)
KXV3A (RX ANT,
K3 listed on 11-06-11 for sale has a sale pending. Thanks to all who expressed
an interest.
John Campbell, Jr. k8DHA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I have an EL-001S RigExpert cable for sale
that will connect the RigExpert Standard, Plus and TI-5 to an Elecraft
K3. New, these cables sell for $48.00 plus shipping. I will sell for
$35.00 shipped to your USA QTH. Contact KN8N via email -
lboeke...@sbcglobal.net
Hi to the group -- I have a bvery nice KDSP-2 that I am not using.
I think I am getting old -- I keep forgetting that it was installed in radio
-
So, since I don't use it -- you might as well have it to use --
$180.00 shipped or trade for a W2 with HF head or a KAT2
thanks -- Rick NU7Z
Hi to the Group --
Extra to my needs -- A very nice KDSP2
$180.00 shipped or trade for a KAT100 or W2 with HF head
Thanks, please contact me off the net
Rick NU7Z
nu7...@gmail.com
__
Elecraft mailing list
Home:
I have decided to focus just on HF so I'm selling my PR-6 Elecraft receiver
pre-amp for the six meter band. It is in excellent condition. $125 includes
shipping to CONUS. I will also be selling my M2 6M5XHP six meter yagi.
Please contact me direct at k9...@arrl.net
Dale, K9VUJ
W2 Watt Meter FOR SALE:
Like new W2 watt meter that is excess to my present needs. Complete with all
cables, owners manual, and 2000 watt 1.8-54 coupler.
$220.00 and I will ship to lower 48.
Please contact me off list.
krenner1...@msn.commailto:krenner1...@msn.com
Kurt K0ARO
I have a Tokyo High Power linear amplifier model HL1.5KFX for sale. I have had
it less then a year and it has been operating perfectly since I installed it.
It is in a non smoking environment. I also have the original manufacturing
carton. The amp comes with a 120 volt power cord. It also
I have a Tokyo High Power linear amplifier model HL1.5KFX for sale. I have had
it less then a year and it has been operating perfectly since I installed it.
It is in a non smoking environment. I also have the original manufacturing
carton. The amp comes with a 120 volt power cord. It also
I have a KAT100 for sale. Price is $190 which includes shipping to the conus.
If interested please reply to me directly off the list. Thank you
-Bill AA1O
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
CHECK, OR +3% ADDITIONAL BY
PAYPAL.nbsp;nbsp;nbsp; CONTACT k...@earthlink.net
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-ELECRAFT-K2-100-tp796p796.html
Sent from the Elecraft mailing list archive at Nabble.com
New to this Reflector so I am figuring out how to post.
I have posted my K2/100 for sale (by Donald). If interested please respond
to k...@earthlink.net.
Thanks.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-ELECRAFT-K2-100-tp796p807.html
Sent from
.
$1,195 INCLUDING SHIPPING INSURANCE - USA POSTAL ADDRESSES. PAY BY USPS
MONEY ORDER, CASHIER'S CHECK OR +3% ADDITIONAL IF BY PAYPAL. CONTACT
k...@earthlink.net.
-
Donald, K6RV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-ELECRAFT-K2-100-tp572p924.html
I have an Ameritron AL-80B 1 kW amplifier for sale. It's in very good
condition. I acquired it from the estate of VE3DTQ (SK), but I'm just
not a QRO guy. I had it checked out by the local ham dealer and it puts
out 700W on all bands except 10m, where they measured 690W. That's
driving it
Message -
From: Ken Alexander k.alexan...@rogers.com
To: elecraft@mailman.qth.net
Sent: Tuesday, July 19, 2011 10:38 PM
Subject: [Elecraft] For Sale: Palm Radio Mini-Paddle
Hi Folks,
I have for sale one Palm 817 Mini-Paddle. This is a very nice, small
(1 x 1 x 3) paddle perfect
k.alexan...@rogers.com
To: elecraft@mailman.qth.net
Sent: Tuesday, July 19, 2011 10:38 PM
Subject: [Elecraft] For Sale: Palm Radio Mini-Paddle
Hi Folks,
I have for sale one Palm 817 Mini-Paddle. This is a very nice, small
(1 x 1 x 3) paddle perfect for portable use. The Palm 817 is black
This item is SOLD. Thanks for your interest.
73 - Ken
On 7/19/11 11:38 PM, Ken Alexander wrote:
Hi Folks,
I have for sale one Palm 817 Mini-Paddle. This is a very nice, small
(1 x 1 x 3) paddle perfect for portable use. The Palm 817 is black
to match a Yaesu FT-817 and come with a snap
I have a Buddistick Deluxe Package for sale. See it on the Buddipole
website at:
http://www.buddipole.com/buddistick-dlx-pkg.html
The package includes the following:
- Clamp for attaching to table or other objects
- Two 6-foot telescoping whips
- Two antenna arms
- Loading coil with a total of
Hi Folks,
I have for sale one Palm 817 Mini-Paddle. This is a very nice, small
(1 x 1 x 3) paddle perfect for portable use. The Palm 817 is black
to match a Yaesu FT-817 and come with a snap on magnetic base so it will
stick to an FT-817's cabinet. Elecraft cabinets are aluminum so it
: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-Elecraft-K3-and-filters
Latest 1.08 firmware, both amplitude and frequency calibrated, in perfect
physical and electrical condition, will ship insured via UPS or Priority
Mail to any US Zip Code (International contact me). Current list price
$749.95 plus shipping...asking $600 plus shipping. Please contact me
OFF-LIST
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-Elecraft-P3-tp6490489p6490637.html
Sent from the Elecraft mailing list archive at Nabble.com
I'm clearing my shack of unused items including my backup K3 (in
anticipation of eventuallly adding a KX3 plus amp as my backup/portable
unit). This K3 has barely been used but I've kept it up-to-date with all
relevant hardware mods (8 total) plus the latest firmware. The only mods
not done are
Sale pending ...
--- Holger Meinecke dl6...@yahoo.com schrieb am Do, 16.6.2011:
Von: Holger Meinecke dl6...@yahoo.com
Betreff: [Elecraft] FS: elecraft hexkey
An: elecraft@mailman.qth.net elecraft@mailman.qth.net
Datum: Donnerstag, 16. Juni, 2011 15:54 Uhr
#0234, mint condition,
100 EUR (or
Recently, I purchased this mic via a want ad on this reflector. Unfortunately,
the seller did not think it was necessary to disclose that the mic had been
exposed (an understatement) to tobacco smoke, and I, thoughtlessly, did not
ask.
Upon receipt I scrubbed it inside and out with
I am highly allergic to tobacco smoke. Just a hint will trigger a severe
histamine attack; tearing red eyes, runny nose, sneezing, sinus congestion,
etc.
I have had good results by simply burying the offending article in Baking
Soda for a few days. For a mic like that, I'd open the case so all
The mic has been sold.
73 de K6SBA
David in Santa Barbara
__ Information from ESET Smart Security, version of virus signature
database 6201 (20110612) __
The message was checked by ESET Smart Security.
http://www.eset.com
HI all, Well I find that for its application my K3 is going to waiste. Its
far to much radio for the position its holding in my Ham radio life. So
Forsale:
K3/100 factory assembled 2/2011
W/ Sub Receiver, ATU, 2.7 1.0 500 and 250hz filters. USB( still in orginal
packing) adaptor and a
Howdy Gang:
I've had several tire kickers asking about my K1-4 but it is still available.
I recently built this K1-4 and it covers 40/30/20/15 meters and has the
optional LCD backlight installed.
It is in like-new condition and will ship with manual to CONUS for $380.
Hi Folks,
I have several straight keys and paddles for sale, originally owned by a ham
friend who passed away recently.
1. Bencher chrome straight key, model RJ-2 -- $90Photo:
http://www.flickr.com/photos/kenaimages/5766548153/in/photostream
2. Vibroplex straight key, chrome base --
For sale a Palm Mini Paddle as here:
http://www.palm-radio.de/english/english.html or here:
http://www.mtechnologies.com/palm/
It is machine screw mounted centered along the front edge of an Elecraft right
side panel (E100076R $21.58 in March 09). With cable. Paddle cover color
matches
I have for sale, still in the original packing, the K3 ...K144XV-F factory
assembled 2 meter internal module with the required 13 Khz filter for $370
shipped con USA. Currently Elecraft prices for this package is $480. I just
never got around to installing in my K3 and realistically won't as my
I'm selling my KDSP2 for the K2. I bought it for the purpose of programming
it to make a continuously-variable bandwidth filter on my K2, but it's clear
I'm not going to get to this project any time soon.
The KDSP2 allows a great deal of tuning control over bandwidths and center
frequencies for
.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-Elecraft-P3-tp6387048p6387048.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I'll take it if you haven't sold it.
73, John N1JM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-Elecraft-P3-tp6387048p6387257.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
Howdy Gang:
The KX1 I advertised for sale has been sold.
The K1-4 is available...like new condition...s/n 2964.built several weeks
ago..fully tested and operational.
Covers 40/30/20/15 meters and has the optional LCD backlight installed.
Will ship CONUS with manual for $400.
My W2 Wattmeter - built November 2010 with one 1.8 - 54 MHz 1-2000 watt
sensor is for sale. My new KPA500 has a a wattmeter built in that meets my
needs. Will ship with manual, power cable, and sensor cable for $200
(CONTUS). Please contact me off list.
Thanks, ..mike AI6II
Howdy Gang:
Time to build another kit so I offer for sale my recently completed K1-4 that
covers 40/30/20/15 meters.
This K1 is s/n 2964 and has the backlight option installed...of course it is in
like-new condition fully tested and operational.
This is the fourth K1 I have built and I
My wife is shocked, but I've decided to sell my K-2, #3090. This rig
may have a few minor scuffs and scratches (I think, it's been in a box
for a year, don't remember, it might not have any scratches, but I'm not
going to unpack it. hi hi). It's been around the world with me and used
on
Hello Group,
This highly useful small RF signal generator is now surplus to my requirement.
http://www.elecraft.com/manual/E740084%20XG2%20Manual%20Rev%20E.pdf
I would like to dispose of it at USD50 including shipping. I will send it to
you by registered airmail. Or if you like, I can
For Sale: Elecraft AF1 audio filter. Built in January, 2011 and encased in
finished red oak cabinet. Used very little in perfect condition. $50
shipped CONUS. If interested contact me at k9os...@yahoo.com.
Bob - K9OSC
--
View this message in context:
http://elecraft.365791.n2.nabble.com
K3 serial number 4688
P3 serial number 537
Both units received 2nd week of Sept. 2010 with last contact made 17 Nov.
2010
You won't find a K3 and P3 with fewer hours unless you go to Elecraft.
K3 ordered as follows
K3/100-F Factory assembled K3 with 100W
KAT3-F ATU
KXV3A
Sale pending on K3 P3Amp still available.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Hi Gang,
I built this transverter last year for the VHF/UHF contests and it was
aligned by Elecraft service. (The power module was bad out of the box, hence
the repair and alignment.) It puts out full power and works great with my
FT-817. I've decided to give up performance for simplicity in my
I HAVE FOR SALE 1 EACH OF THE FOLLOWING MINI-MODULES, BUILT, IN MINT SHAPE, ALL
WORK FINE. All come with original manuals:
DL-1 20 watt dummy load
N-GEN wide band noise generator
XG1 signal generator, 40 meter
Sell all as a group for $70 shipped to your shack. Pay Pal OK.
Please reply
Jeff Kinzli N6GQ wrote:
I have a newer K2/100 (5000's serial number) with KDSP2, KIO2 and
KNB2. I find that it sits on my desk and I don't use it, so I'm
looking to sell and invest in more antennas.
[snip]
I'm open to reasonable offers. I don't know what it is worth.
The usual approach to
Hi there,
I have a newer K2/100 (5000's serial number) with KDSP2, KIO2 and
KNB2. I find that it sits on my desk and I don't use it, so I'm
looking to sell and invest in more antennas.
I built the K2, and it works great, but does have one small bug - the
TX output spikes sometimes but I have not
The K1 has been sold. The KAT2 is still available.
Sam, N4SAM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I have for sale a 4 band K1 with KAT1, KBT1, KNB1 and K1BKLT. $400 shipped in
US.
I also have a KAT2 with KBT2. $175 shipped in US.
Please contact off list if interested.
Sam, N4SAM
__
Elecraft mailing list
Home:
Hi Guys -
Regret Ive had to downsize my collections/station following recent medical
problems -
I have the following - For Sale -
1 - Elecraft K2/100 - Ser No 3118 - My cost - excluding taxes and exchange -
$2100 - Asking $1500
- KPA100 Amplifier with upgrades including FWare and shield
Sold.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-LP-PAN-and-Quartet-Sound-Card-tp5994778p6002836.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
For Sale: LP-PAN and the Quartet Sound Card (192 Khz) with Cables. $250.
Includes shipping CONUS.
Mike
W0IH
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-LP-PAN-and-Quartet-Sound-Card-tp5994778p5994778.html
Sent from the [K3] mailing list archive at
I am selling my W2 with the 1.8-54 Mhz Coupler (2KW) for $150. Was built from
kit. Works perfect. Recently repaired/checked by Elecraft service. Has a small
scratch on left side panel near rear, easiliy touched up with black paint.
Please contact off list. Free shipping in USA. Selling in
LP-Pan and EMU-0202 $210 together plus shipping . Includes USB cable that
powers the EMU, and power cord for the LP-Pan (RCA connector plugs into back
of K3). I used temporary audio cables with adapters; these will not be
included. Both units in perfect condition and work perfecdtly with no
For sale: K2/10 SN 5251 with Audio Filter, Noise Blanker, Internal
Automatic Antenna Tuner, SSB Adapter and Clifton Labs IF Buffer Amp.
Includes a nicely packaged Softrock-based receiver to drive a PC-based
Panadaptor display, a virtually new Heil HM-IC microphone, and an Astron
RS-12 power
K2 serial# 003943 and the KI02 AUX IO module - THIS KIT HAS NOT BEEN
OPENED (other than the box it was shipped in) and has NOT BEEN STARTED.
All paperwork included and all in the same box with the kit
Want to sell both together as a package.
Will sell for 10% off of the current prices PLUS
I have two 13 Khz filters (KFL3B-FM) excess to my needs. Perfect condition. I
don't use FM, although I must say it makes AM broadcast sound nice with good
speakers. I will take $90 each or the pair for $160. Free shipping. USA only.
Please contact me off list. Kermit, KF5VM.
KX1 with KXAT1, KXB30, KXPD1.
Unmarked.
Worked JA lp ON 30M from VP9 !
Please contact off list
John G3XRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
$1100...
plus you pay shipping...
Here is what you get
K2 #1264
KPA100
SSB Side Band
KNB Noise Blank
KAF2 Audio Filter
KATU 20 Watt Tuner
KIOS RS 232 i/o
KBT Battery option with Battery
All up graded to current versions.
Paypal cool.
This radio was just worked over by Don W... so
Santa Claus brought an XG2 so I no longer need my XG1.
Asking $40 shipped by USPS Priority in the US. Prefer PayPal but USPS
Money Order is OK.
Please do not reply to the list. Contact me at n...@arrl.net.
Thanks 73,
Alan N5NA
__
601 - 700 of 921 matches
Mail list logo