*For Sale Elecraft KSYN3A Upgrade Kit, CBLP3Y Cable Set, KPAK3AUXSE Cables
Set And CW-SSB 8 Poles Filters For K3-K3S XCVR. All Cables And KSYN3A Set
Are New. Asking Price Include Shipping And Payment Through Zelle, USPS
Money Order Or Check. QRZ Contact Information Is Good And Phone Number
239-227
Just a note that I got from Madelyn.
No, not my turn for the K4, but my K3syn upgrade board for my K3, non-s
(serial # 53!) is shipping.
Inch by inch I get to move forward!
Tom K8TB
__
Elecraft mailing list
Home: http://mailman.qth
Never mind. Still available. Found them on the site by searching for the
upgrade kit name, K3SYN3AUPG
-Bruce, N1RX
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
With the discontinuation of the K3S, I decided to take a look at the website to
see if the KSYN3A updated synthesizer modules are still available for my
original K3, s/n 559. It does not appear there anymore. Are these updated synth
modules in fact, now gone?
Bruce, N1RX
__
Hi,
I was actually very fortunate-- he upgraded from his Collins gear to the
Elecraft K3, then to the new synthesizers. He only got to use his K3
gear for a year or so, then he passed suddenly. His son in law got the
K3, and loves it, so the rig got a good home.
73s and thanks,
Dave (NK7Z/N
Spectacular results Dave! You are indeed fortunate to have a good neighbor
who understands the issue and was willing to upgrade to the KSYN3A. I can
think of several instances in my 61+ years on the air when I would have
loved to have both my neighbors and myself using KSYN3As. This is
especiall
I have put the results of comparing the old synthesizer to the new
synthesizer up on the web page again. They were removed in error a few
months ago...
The page shows a series of P3 graphs showing two K3's about 900 feet
apart, as they both moved from the old synthesizer to the new synthesize
from Ian GM3SEK
>-Original Message-
>From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
>boun...@mailman.qth.net] On Behalf Of G8KQW
>Sent: 31 March 2018 09:27
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] KSYN3A check
>
>Hi,I've purchased a used K3 serial #
Hi,I've purchased a used K3 serial # < 8800, is there a way to check whether
a KSYN3A is installed from the Menu system to save taking the cover off?//
Ian
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
H
Use a 5" or 6" TMP cable and hook it from J6 on the KREF3 (same as old
synth) to either J83 or J1 on the KSYN3A.
73,
Rich AC7MA
On 06/12/2016 09:29 AM, Michael Murphy wrote:
I am about to install a new synthesizer board in my K3. I do not have the
2nd rx or a 2 meter module.
I am not clear
It would be the graphic in figure 12 on page 15 of the instructions. It hooks
up with just one tmp cable and the long one isn't used.
It all looked like spaghetti to me too when I did the upgrade on my K3, but
that's the figure that shows the hookup for no 2 meter module and no 2nd
RX.
73,
L
I am about to install a new synthesizer board in my K3. I do not have the
2nd rx or a 2 meter module.
I am not clear on which connector(s) to hook the tmp connector(s) to.
The instructions seem to be more geared toward installing it with the 2nd
rx and/or the 2 meter module.
What am I missing?
Yes, RIT is off as are some other features for QRQ mode.
With the new syn QRQ mode becomes finally what it was intended for, a
speciality mode for doing 80 WPM full break-in. And the ridiculous less
than one millisecond TX RX TX state change budget, required to hear between
bauds at that speed, ma
Yes, it is as Guy said and I agree.
Normal QSK is improved as reported and tested by several ops and I do not
worry which QSK is set at 40wpm or so on my K3 with new KSYN3A.
I just mentioned to Barry that new QRQ mode is off when RIT is used...;)
73 - Petr, OK1RP
-
http://ok1rp.blogspot.c
Non QRQ mode is significantly improved with the new synthesizer and many
think contest operating to 35 or 40 WPM don't gain anything by switching to
QRQ mode.
73, Guy K2AV
On Friday, November 13, 2015, ok1rp wrote:
> Barry,
>
> QRQ mode is off when RIT is used unfortunatelly.
>
> 73 - Petr, OK1
Barry,
QRQ mode is off when RIT is used unfortunatelly.
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KSYN3A-and-QSK-tp7610301p7610304.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
I am thinking of further upgrading my venerable K3 S/N 13** by installing
the new synthesizer boards. I have already fitted the KXV3B which is
fantastic as regards the receive preamp on 12, 10 and 6.
My question is does the installation of the KSYN3A retain the two grades of
QSK (normal and fast)
t;Brian F. Wruble"
> To: wb6r...@mac.com
> Cc: "Elecraft Reflector"
> Sent: 11/2/2015 5:07:33 PM
> Subject: Re: [Elecraft] KSYN3A Upgrade Problem with my K3
>
> I have. They are in the right places, and wiggling makes no difference.
>>
>> I also am ge
got accidentally shifted to "Not
> Installed"? Also check the selections for audio output control in the menu.
>
> -- Original Message --
> From: "Brian F. Wruble"
> To: wb6r...@mac.com
> Cc: "Elecraft Reflector"
> Sent: 11/2/2015 5:07:33 PM
>
/2/2015 5:07:33 PM
Subject: Re: [Elecraft] KSYN3A Upgrade Problem with my K3
I have. They are in the right places, and wiggling makes no
difference.
I also am getting "SYN1 OK" and "SYN2 OK" indications.
*Brian F. Wruble, C.F.A.
On Mon, Nov 2, 2015 at 5:58 PM, wrote:
Sent from my iPad
> On Nov 2, 2015, at 5:07 PM, Brian F. Wruble wrote:
>
> I have. They are in the right places, and wiggling makes no difference.
>
> I also am getting "SYN1 OK" and "SYN2 OK" indications.
>
>
> *Brian F. Wruble, C.F.A.
>
>
>
>
>
>
>> On Mon, Nov 2, 2015 at 5:58 PM,
I have. They are in the right places, and wiggling makes no difference.
I also am getting "SYN1 OK" and "SYN2 OK" indications.
*Brian F. Wruble, C.F.A.
On Mon, Nov 2, 2015 at 5:58 PM, wrote:
> Check the TMP cables. - GL - Steve WB6RSE
>
> On Nov 2, 2015, at 2:54 PM, Brian F. Wruble wro
Hi all,
I just replaced main and sub-receiver synthesizer boards with the upgraded
KSYN3A boards.
I seem to have lost audio from the sub-receiver. When I activate "SUB" and
turn the balance control fully clockwise, all I get is silence.
I have restored the last configuration that worked (with t
You need two. The K3 cannot handle one of each in the same receiver.
73, Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KD3TB
Sent: Monday, October 26, 2015 2:56 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] KSYN3A s
Unless you want to remove the sub receiver, you will need two new synths.
73 Bill AE6JV
On 10/26/15 at 2:55 PM, idar...@gmail.com (KD3TB) wrote:
> I have an older K3 with a sub receiver that I am thinking of upgrading.
> This is a second radio that I use at my beach house. If I rarely use the su
I have an older K3 with a sub receiver that I am thinking of upgrading.
This is a second radio that I use at my beach house. If I rarely use the sub
receiver, can I just upgrade the main receiver board with one KSYN3A
synthesizer or do I need to purchase two KSYN3A synthesizers?
Irwin Darack -
Earlier in the year I installed two KSYN3A boards in a K3 using FW 5.01.
The installation went fine and the radio has been used extensively all
year. Yesterday, I updated the FW from 5.01 to 5.35 along with the later
DSP and FP versions. I then restored a K3 Configuration I had saved prior
to the
Ethanol and Isopropyl Alcohol are almost as polar as water. That's why
they mix so well with water.
https://en.wikipedia.org/wiki/Solvent
According to its Wikipedia entry, ethanol doesn't even mix well with
heavy oils. Isopropanol is better.
--
David Woolley
Owner K2 06123
On 09/09/15 01:5
grees C. 30
minutes is all that is needed.
73,
Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Tuesday, September 8, 2015 6:15 AM
To: 'Ian White'; elecraft@mailman.qth.net
Subject: Re: [Elecr
You can get denatured alcohol from the hardware store, but I think that
can contain methanol which I wouldn't suggest using because of toxicity
and because it melts more things than ethanol. Methanol will go through
your skin so you need ventilation and the correct gloves.
Rubbing alcohol from th
> Food grade EverClear is 100% alcohol...
Not quite. Pure ethanol is a *practical* impossibility.
https://en.m.wikipedia.org/wiki/Everclear_(alcohol)
It comes in 75.5 percent (151 proof) and 95 percent ethanol (190 proof)
varieties. Sale of the 95 percent is banned in some states.
The 91 p
One other thing to consider that can make a difference in some cases. There
are three types of alcohol commonly available. Methanol often used as shellac
thinner, ethanol, booze if you wish, which EverClear is, and isopropyl which is
often found in rubbing alcohol sold in drugstores. They var
Food grade EverClear is 100% alcohol but government classified in the U.S. as a
taxable beverage. Buy it at a liquor store.
--
Marc W8SDG
> On Sep 8, 2015, at 9:14 AM,
> wrote:
>
> When you purchase alcohol to use as cleanup it's best to get the highest
> concentration you can get, else
aning and
evaporates more cleanly.
Jer
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian
White
Sent: Tuesday, September 08, 2015 4:09 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod problem
>Don:
>Acetone should NEVER
>Don:
>Acetone should NEVER be used in electronic assembles. Acetone
>causes both long and short term effects on various components
>including the PCB. It effects epoxy, lacquers, paints, and plastics,
>particularly polystyrenes
[...]
>73, Fred, AE6QL
Chemicals intended for use around electroni
PCBs (FR-4) are glass reinforced epoxy, not polyester (I think the old,
brown ones (SRBP) are paper reinforced urea-formaldehyde). Also the
resin component is cross-linked, whereas the article is talking about
thinning the uncured (un-crosslinked) resin. (Glass reinforced polyester
is used in
Disband the terrorist EPA (A terrific idea regardless) and we could go back to
Freon vapor degreasers.
On 9/7/2015 5:05 PM, Don Wilhelm wrote:
Fred,
Gary and I both have been using acetone for a long time.
If the board is flooded, the results can be catastrophic since residue flows
under comp
as long as it pure, be used for
de-fluxing PC boards.
73, Fred, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Monday, September 7, 2015 2:43 PM
To: Nick Lelyak
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod
d, AE6QL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Monday, September 7, 2015 2:43 PM
To: Nick Lelyak
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KSYN3A mod problem
Nick,
Yes, but it fails when it cools again - somethin
yes Don,
problem comes on again after radio cools down.
Pins were properly cleaned from residue, but they
are not gold plated and I black spots on some of them had left after
cleaning with contact cleaner. So I decided buy recommended cleaner first
Thanks
Nick
On Mon, Sep 7, 2015 at 5:43 PM, Don
Nick,
Yes, but it fails when it cools again - something is not making good
contact, and it may be residue from the cleaner. I can't be certain of
that, but I would get that cleaner residue off and try again.
I would suggest that you remove the cleaner residue from the contacts
with acetone
Thanks Don, Guy
appreciate yours quick response.
I found out that problem disappears when front panel warms up to 37 C
and more.
Looks like problem somewhere in FP. To clean main connector I used
Electronic Contact Cleaner. It may works not so good as Deoxit which
is not widely available in Canada.
Nick,
I don't think it is related to the synthesizer, but go through the other
things you did (cleaning the Front Panel connector and some other
boards) - you should unplug those, and depending on how you "cleaned"
the connectors, wipe them carefully and reassemble.
Work on each connector one
Hi,
have replaced old synthesizer in my K3 for new KSYN3A and have problem with
this modification.
Changing frequency by VFO A or VFO B several kHz up or down switches mode
to reverse
(CW to CWR, USB to LSB), frequency on display jumps 1 mHz lower ( ex.
14015.00 > 13015.00,
1830.00 > 0830.00 etc.)
Interesting observations after upgrading my K3 to the KSYN3A this evening.
1. I was already running 5.14 firmware. After installation I upgraded
to 5.29 but the DSP was already at 2.83 so I only sent the MCU and FPF
firmware. After the upgrade I started getting ERR DSE. Reflash of all
firmwa
Hi Enrico,
aha, so it sounds like more serious issue.
I never heard about the issue with erased synthesizer but if it happened to
your friend then its time to contact Elecraft.
I am so sorry that I can not help you more my friend.
Let us know please about the progress.
best regards,
73 - Petr, O
Hi Petr, I have two ksyn installed, and both worked fine for some months.
I did not open my K3 in the last weeks, and two days ago my K3 was ok,
so this happened without touching anything.
An italian OM had another problem with a deprogrammed SYN. I wonder if
Elecraft is aware of this and who's
Hi Enrico,
The correct status for KSYN3A boards in TECH MD: ON is OK! So you should see
SYN1 OK and SYN2 OK if you have both installed. The latest KSYN3A boards
should work with 5.14 or later.
Please open K3 and at first check if your cables are connected to right
boards (not swapped by accident)
Hi everyone, today I turned on my K3 and I can't receive any signal in
any band.
Then I tried to tune and power out is 0.0w.
My k3 has two ksyn3a, but in the menu I see DDS FRQ and VCO MD; also
tapping DISP I see PLL1 and PLL2 (with value ranging from 2.9 to 3.1)
So it looks like the K3 doesn't
I just went thought this process and the new KRX3 comes with the new synth. I
had to pick up a new synth to replace the old one in the main receiver as they
have to match.
It only took 12 hours to do it all including redoing the filters in the
receiver because I did not read the manual close e
As long as you buy a new KRX3-A I guess it would come with a KSYN3A.
73, Yngvi TF3Y
On Mon, Jun 22, 2015 at 12:59 AM, Russ wrote:
> All:
>
> For those of you who don't read instructions like me - remember to
> download and install the latest K3 utility before uploading the new 5.14
> firmware (
As a cautionary tale, reading the instructions is really not optional with this
stuff :)
If you decide to install the KRX3 for example, there are lots of little gotchas
in the KRX3 install that are easily avoided by reading the directions. Not
doing so is certainly at your own peril.
Tom NY4I
Russ,
If you install the KSYN3A for the main and then add the KRX3, you must
have the KSYN3A for the sub as well.
You cannot mix the synthesizers - they must both be the same.
Cheap/thrifty/cost effective does not matter, they both need to be the same.
73,
Don W3FPR
73,
Don W3FPR
On 6/21/20
Per the KSYN3A Installation instructions:
"You cannot have a new KSYN3A synthesizer and the original KSYN3 in the
same K3! If you have the KRX3 sub receiver installed, you must install
two KSYN3A synthesizers."
Mike
KI0HA
On 6/21/2015 7:59 PM, Russ wrote:
All:
For those of you who don't r
All:
For those of you who don't read instructions like me - remember to download and
install the latest K3 utility before uploading the new 5.14 firmware (or above)
- otherwise you may get an FPF load error.
Question - if I decide to install a KRX3 later, can I reuse the old KSYN3 for
it - can
Wayne,
The new KSYN3A is supposed to have the new wonderful T/R speed making CW
QSK sound like the old KSYN3 with the QRQ selected to on (for the most
part). This leaves me with the question... Since the QRQ function is
still available when you have the new KSYN3A boards installed, what does
The K3 has very high dynamic range, requiring a high-level local oscillator
(the synth). One way to minimize spurs ("birdies") in a superhet design of this
type is to include very narrow-band filtering, which we used throughout the
radio. The ham-band filters are all just a bit wider than the ha
Thanks, Arie.
I've never tried diversity reception. I must get around to it soon. The birdies
are a worrisome report.
73, Mike NF4L
> On May 4, 2015, at 7:14 AM, Arie Kleingeld PA3A wrote:
>
> I installed two new SYN3A's yesterday in K3 #1255
>
> A very positive surprise: The diversity mode
I installed two new SYN3A's yesterday in K3 #1255
A very positive surprise: The diversity mode has improved a lot. The
'woosh' during tuning has competely gone! Super.
A negative surprise: Tuning noise on 40m (S3 !) plus birdies.
I will install the tuning noise reduction mod (of 2009) now and
Roger,
More on this...
Since KSYN3A buyers may not always see the FAQ, we'll be adding something like
this to page 1 of the KSYN3A installation manual:
* * *
Note on K3 low-frequency (100-400 kHz) receive coverage with the KSYN3A
installed:
With a KSYN3A installed, the K3 VFO can be tuned as
Hi Roger,
The noise floor is coming up because the RX circuitry was optimized for use
from 250 kHz and up. Multiple sources start contributing significant noise
below 250 kHz.
Even though the new synth tunes down to 100 kHz, we tried to make it clear in
the KSYN3A FAQ that the receiver isn't v
On Mon,4/6/2015 4:01 PM, Roger D Johnson wrote:
500 kHz -127 dbm
400 -127
300 -124
200 -113
100 -93
That's a 34 db increase in noise level!! Is this the way the new
boards are supposed to work?
Is this with or without an antenna connected? What's the nature
It sounds like you've only put one new board in a 2RX K3. I don't
believe that's a supported configuration...
73, Ross N4RP
On 4/6/2015 7:01 PM, Roger D Johnson wrote:
My new boards arrived today. I popped one into the K3 for some
testing. I was especially interested
in the low frequency perf
My new boards arrived today. I popped one into the K3 for some testing. I was
especially interested
in the low frequency performance as I like to DX the LF broadcasts from 153 to
279 kHz. What I found
was that below 400 kHz, the noise level rises and at 100 kHz it's almost 20 over
9 on the S met
Am 03/22/15 um 16:40 schrieb Eric Swartz - WA6HHQ, Elecraft:
The new KSYN3a does not need the synth cal step. As noted in the manual, that
only applies to the older synthesizer.
73,
Eric
elecraft.com
_..._
On Mar 22, 2015, at 7:39 AM, Klaus Dittrich wrote:
K3 SN 8887
MCU 5.14 / DSP 2.83
The new KSYN3a does not need the synth cal step. As noted in the manual, that
only applies to the older synthesizer.
73,
Eric
elecraft.com
_..._
> On Mar 22, 2015, at 7:39 AM, Klaus Dittrich wrote:
>
> K3 SN 8887
>
> MCU 5.14 / DSP 2.83 / FPF 1.19, 2/26/2015
> Latest Production Release
>
K3 SN 8887
MCU 5.14 / DSP 2.83 / FPF 1.19, 2/26/2015
Latest Production Release
I still see CONFIG: VCO:MD -- and calibration started (digits count
uwards) after leaving the menu but ends with an error after some time.
I assume this can be ignored, as the KSYN3A does not need calibration?
Or
And also make sure you download and follow the revised instructions and
Errata from the Elecraft website. Do NOT follow the printed
instructions shipping with the boards (unless they match the website
revisions).
Note also that if you have the 2-meter phase-lock option, the REF OUT
cable is
The install in two K3s, each with one receiver, went well.
Make sure you connect the cable to the correct port on the ksyn3a. Don't ask
me why.
The K3 is the greatest!
73, Steve, k4fj
__
Elecraft mailing list
Home: http://mailman.qt
I reviewed the data published by Rob Sherwood. It would be of interest to
see test data on the same K3 with the old and the new synth boards. I
suspect that other ongoing improvements to the K3 have influenced some of
the measurements.
73
Gregg w6izt
_
For those interested, ordered Feb 13, the KSYN3A arrived on my desk here in
the UK this morning. USPS cheapest international option ("cheap" is a
relative term!).
On 27 February 2015 at 14:51, Dauer, Edward wrote:
> Info for those who asked about order and shipping status - I ordered on
> Feb
Info for those who asked about order and shipping status - I ordered on Feb. 14
and just received notice that they were shipped Feb. 26, due here in Denver
March 3.
Ted, KN1CBR
__
Elecraft mailing list
Home: http://mailman.qth.net/mail
Nice tip, Gary: Thanks (just in case!).
73, Phil W7OX
On 2/20/15 9:28 PM, Gary Smith wrote:
What I do with things like putting those split washers into a hard to
access situation is to take a piece of tape, put the sticky side on
my jeans, pull it off with the accompanying lint and then pressin
If that ain't the truth!
What I do with things like putting those split washers into a hard to
access situation is to take a piece of tape, put the sticky side on
my jeans, pull it off with the accompanying lint and then pressing
the washer onto the tape. It'll hold the washer in place and let
Best part was NOT having to reinstall those split
washers :-)
Phil W7OX
On 2/20/15 7:04 PM, Gary Ferdinand wrote:
I’m a very satisfied K3 owner. Today I installed the two KSYN3A boards
according to the documentation. My K3 has the internal 2 meter transverter
(K144XV) installed, so I had
I’m a very satisfied K3 owner. Today I installed the two KSYN3A boards
according to the documentation. My K3 has the internal 2 meter transverter
(K144XV) installed, so I had a few extra steps to perform above a 2-board, no
transverter configuration.
I got hung up a few minutes on page 14.
/
http://www.500kc.com/USA_600_M_Station_ID.htm
http://www.500kc.com/Maillists.htm
73, Ed - KL7UW, WD2XSH/45
--
From: Ross Primrose
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KSYN3A and below 490 KHz?
Message-ID: <54e4e403.5060...@n4rp.
To: Harry Yingst
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KSYN3A and below 490 KHz?
snipped
> Is it possible to move the lower limit down (lower than 100 kHz)
or is is a constraint of the HW?
The latter. Sensitivity gradually decreases as you do down in
frequency, and you st
Phil,
I'm txing now - WSPR - set ur dial to 474.2 khz - upper side band
Ken K5dnl/Wg2xxm
On Wednesday, February 18, 2015 8:06 PM, Ken Roberson
wrote:
Hello All .
There is a photo of antenna and a little info on qrz-dot-com
Ken K5DNL/WG2XXM
On Wednesday, February 18, 2015 7:
Hello All .
There is a photo of antenna and a little info on qrz-dot-com
Ken K5DNL/WG2XXM
On Wednesday, February 18, 2015 7:13 PM, Phil Wheeler
wrote:
What sort of antenna do you use for the 630 m band
TX, Ken?
Phil W7OX
On 2/18/15 4:19 PM, Ken Roberson via Elecraft wrote:
> Hell
What sort of antenna do you use for the 630 m band
TX, Ken?
Phil W7OX
On 2/18/15 4:19 PM, Ken Roberson via Elecraft wrote:
Hello All,My synthesizer board shipped today , Looking forward to testingMy new
built HB power Amp on 630 meter band with no transverter.
Anyone can apply for a Experimen
Hello All,My synthesizer board shipped today , Looking forward to testingMy new
built HB power Amp on 630 meter band with no transverter.
Anyone can apply for a Experimental license to operate on the630M band - The
cost is $ 65.00 for a two year Grant.73 allKen K5DNL/WG2XXM
On Wednesday,
There's always 160-190 KC
1 watt into a 49' antenna
From: Ross Primrose
To:
Cc: Elecraft Reflector
Sent: Wednesday, February 18, 2015 2:12 PM
Subject: Re: [Elecraft] KSYN3A and below 490 KHz?
On 2/18/2015 1:17 PM, Wayne Burdick wrote:
> Probably not. It allows
On 2/18/2015 1:17 PM, Wayne Burdick wrote:
Probably not. It allows quite useful sensitivity down to 250 kHz, and
even some utility at 100 kHz. But most operators are interested in the
600-meter band (472-479 kHz). Wayne N6KR
At the rate they're going, my grand kids will probably be retired bef
Thank you
Even getting this much additional range is a real treat to me.
From: Wayne Burdick
To: Harry Yingst
Cc: Elecraft Reflector
Sent: Wednesday, February 18, 2015 1:17 PM
Subject: Re: [Elecraft] KSYN3A and below 490 KHz?
On Feb 18, 2015, at 10:10 AM, Harry Yingst via
On Feb 18, 2015, at 10:10 AM, Harry Yingst via Elecraft
wrote:
> I ordered a pair of the KSYN3A boards because mainly I have an interest in
> below 500 kHz.
> I already have the KBPF3 General Coverage RX Bandpass boards installed in
> both my receivers.As I understand it I will need to use th
I ordered a pair of the KSYN3A boards because mainly I have an interest in
below 500 kHz.
I already have the KBPF3 General Coverage RX Bandpass boards installed in both
my receivers.As I understand it I will need to use the RX & AUX antenna inputs.
Is it possible to move the lower limit down (lo
On Mon, Feb 16, 2015 at 3:43 AM, QUENTIN COLLIER
wrote:
> I apologise for this being off topic
Note to Eric: This isn't any of our faults. Wayne started it. Go pick on him.
73, Guy
__
Elecraft mailing list
Home: http://mailman.qth.
site...) "Well, yes, there
is NOW" says Schrödinger.
One day I will make a useful contribution to this list
73, Quin G3WRR
From: Stewart
To: Guy Olinger K2AV ; Mike Reublin NF4L
Cc: Elecraft List
Sent: Monday, 16 February 2015, 8:21
Subj
It's neither. Or both. ;)
73,
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
> On Feb 16, 2015, at 12:21 AM, Stewart wrote:
>
> Cat !
>
> Gave ours to this guy called Schrödinger.
>
> Don't know whether it is alive or dead...
>
> 73
> Stewart G3RXQ
, Harry Yingst via Elecraft wrote:
>>>>> But what about us old Head bangers?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> From: Wayne Burdick
>>>>> To: Elecraft Reflector
>>>>> Sent:
ry Yingst via Elecraft wrote:
>>>>> But what about us old Head bangers?
>>>>>
>>>>>
>>>>> From: Wayne Burdick
>>>>> To: Elecraft Reflector
>>>>> Sent: Sunday, February 15, 2015 4:29 PM
>>>&g
gt;>
>>> On 2/15/15 1:50 PM, Harry Yingst via Elecraft wrote:
>>>> But what about us old Head bangers?
>>>>
>>>>
>>>>
>>>>
>>>> From: Wayne Burdick
>>>> To: Elecraft Reflector
>>>> Sent: Sunday,
;
>>> From: Wayne Burdick
>>> To: Elecraft Reflector
>>> Sent: Sunday, February 15, 2015 4:29 PM
>>> Subject: Re: [Elecraft] KSYN3A - installation question
>>> It is quite easy to swap the synthesizer boards without removing the KRX3
>>>
ld Head bangers?
>>
>>
>>
>>
>> From: Wayne Burdick
>> To: Elecraft Reflector
>> Sent: Sunday, February 15, 2015 4:29 PM
>> Subject: Re: [Elecraft] KSYN3A - installation question
>>It is quite easy to swap the synthesizer boards without removing t
And those with no cat?:-)
On 2/15/15 1:50 PM, Harry Yingst via Elecraft wrote:
But what about us old Head bangers?
From: Wayne Burdick
To: Elecraft Reflector
Sent: Sunday, February 15, 2015 4:29 PM
Subject: Re: [Elecraft] KSYN3A - installation question
It is quite easy
But what about us old Head bangers?
From: Wayne Burdick
To: Elecraft Reflector
Sent: Sunday, February 15, 2015 4:29 PM
Subject: Re: [Elecraft] KSYN3A - installation question
It is quite easy to swap the synthesizer boards without removing the KRX3
module. I did it blindfolded
It is quite easy to swap the synthesizer boards without removing the KRX3
module. I did it blindfolded with a long-haired cat on my lap and the latest
Tom Petty album blasting away.
Wayne
N6KR
On Feb 14, 2015, at 12:38 PM, "Joe Subich, W4TV" wrote:
>
> I doubt it ... there is not all that m
Pack Themselves and the box does not address it's selfThey
have to pay someone to do that labor.
From: F5vjc
To: GRANT YOUNGMAN
Cc: Elecraft Reflector
Sent: Saturday, February 14, 2015 6:16 PM
Subject: Re: [Elecraft] KSYN3A (shipping)
I find it a bit humorous that the s
I find it a bit humorous that the subject invariably arising for a $200 (or
$1000 or $10,000+) item ends up being about chump change on shipping
costs. We’ll drop a bundle on something and then spend hours quibbling
about a few bucks on shipping.
At least I know I’ll get a box in the mail from A
1 - 100 of 153 matches
Mail list logo