and now listed on the Wiki
--
73 de M0XDF / K3 #174
On 24 Mar 2008, at 18:01, wayne burdick wrote:
Thanks for identifying a way to reproduce this behavior, which had
proven elusive. Using your method, I've now found the cause and
fixed it, and it'll work correctly in the next firmware rel
Ed,
Thanks for identifying a way to reproduce this behavior, which had
proven elusive. Using your method, I've now found the cause and fixed
it, and it'll work correctly in the next firmware release.
73,
Wayne
N6KR
> Say I am on 12M USB. Filter width is set to 2.7. I switch to CW,
> set
Mine moves maybe a 0.001" if that - and I'm heavy handed.
The buttons 'stick out' about 1/8" and that's consistent across the
entire FP.
--
73 de M0XDF / K3 #174
On 23 Mar 2008, at 03:24, wayne burdick wrote:
Doug,
If your front panel is in the correct position with respect to the
PCB and
Doug,
If your front panel is in the correct position with respect to the PCB
and the chassis, there should be an insignificant amount of
adjacent-key movement in the Z axis. I'll have Elecraft support contact
you to help with this.
73,
Wayne
N6KR
On Mar 22, 2008, at 4:23 PM, DOUGLAS ZWIEBEL
My K3 keys my Alpha 76A just fine. (Non-QSK) I just
ran a RCA plug jump from Key Out to the amp. No
problems. The Key Out is spec'd at +200VDC @ 5A. I
guess someone was thinking about folks with older
amps. :-) I don't use ALC so it's not an issue.
73,
Dave
N8AG
___
I'm sure you would have NO PROBLEM recruiting regression testers, since
the test kit includes a K3 :-)
I volunteer...
OK, so I'm early for the first of April, all the buried antenna thread
has got my reality tweaked...
I actually worked on a project which did some buried antenna research
S Sacco wrote:
Hi Wayne -
Any chance for more thorough testing
Hi Steve,
Yes. I normally do this myself, but was fighting the flu for several
days and missed this one. It was unfortunate timing, as I had just
rewritten a big chunk of code in preparation for additional subreceiver
fun
I have a Tony Parks SoftRock v6.2 Lite for 30 meters. It's packaged for
use with the K3. The included crystal is 32.7680 MHz and the
divide-by-four frequency is 8.192 MHz. Combined with Jack's Z1
buffer amp with 70 dB of isolation, is the local oscillator isolated and
offset from the K3'
216.229.20.37/images/K3.jpg
216.229.20.37/images/K3-1.jpg
The mail list server is blocking my complete, linked URLs. To access the
photos, please include "http://"; in from of the IP address.
Paul, W9AC
___
Elecraft mailing list
Post to: E
Problem #2 Solved
While waiting for replacement boards, I started looking again. The
problem was not on the mixer board as suspected, it was found on the
Synth board. Because of the close proximity of the mixer board to the
synth board, any movement in the immediate area caused to problem to
At 04:50 PM 10/03/08, you wrote:
You might be missing the IF NB :)
I'm sure I installed itI go into config and change it from not
installed to nor..OK
See if it is seated properly. See if there is an enable for
it. Have you used it before?
I'll pop the lid and have a look. I don't
chris K6DBG said:
If you want ethernet control, I suggest that you google "ethernet serial
port". You'll find a handful of boxes for under $100 that have a
serial port on one end and an ethernet port on the other.
As I understand it, the serial port will not pass audio. How would the box help
I really can't imagine why anyone would want to put a 20MHz clock
inside a sensitive HF radio...
If you want ethernet control, I suggest that you google "ethernet serial
port". You'll find a handful of boxes for under $100 that have a
serial port on one end and an ethernet port on the other.
I'll
OMG...I just tried it with the SPLT SV = ON and it works fine. UGH!
On the other hand, I did just reread the Manual, and the function of
SPLT SV is still not clear to me based on what is documented.
But now I get it.
Of course, the "new trick" of PF2 and enter the KHz is much slicker,
so please
Wayne:
Are you kidding me? This is another RTFM issue? Oh boy...color me embarrassed.
Doug KR2Q
On Mon, Mar 3, 2008 at 3:15 PM, wayne burdick <[EMAIL PROTECTED]> wrote:
> Doug,
>
> The SPLIT condition will be preserved across a FREQ ENT within the same
> band if you have CONFIG:SPLT SV (spli
Les,
Sorry about my confusion but also no problem with change in tuning rate here
when pushing the SPOT button.
73, Bob VE3XM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (A
Hi Rose,
IMHO you should keep your dust covers exactly as they are. They fit perfectly
and the rear extension protects the rear cabling. I' m very pleased with mine.
73, Bob VE3XM
Wellesley, ON
K3/100 S/N 00409
K2/100 S/N 04031
K2 S/N 04575
___
2008 15:30
To: [EMAIL PROTECTED]; elecraft@mailman.qth.net
Subject: RE: [Elecraft] RE: K3 with Microkeyer2
Disable router queries or set the radio type to "none" before
initiating an upload. At least two of the K3 beta test team
have microHAM devices and perform uploads through
http://groups.yahoo.com/group/microHAM
[EMAIL PROTECTED]
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Peter Bacon
> Sent: Thursday, February 21, 2008 5:25 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] RE: K3 wit
I have tried unsuccessfully to upload K3 firmware upgrades via my Microkeyer
II and use the KUSB cable instead. I have my Microkeyer talking to the K3
at 38400 bps all the time. I found that I would get part way through a
firmware upgrade and then it would hang up. I recommend you stick to the
K
Roy, W4WFB wrote:
I have downloaded firmware revision 1.68. I am curious about what I
see on the K3
display when I go to FW REVS in the CONFIG menu. VFO A scrolls as
follows:
uC 01.68
d1 01.53
d2 00.00
FL 00.00
dr 00.00
Why do I not see 1.37 in d2? What are FL and dr for? Inquiring
Pleased to work a few other K3s in the ARRL DX contest. I was very
surprised after answering VE3EY's 40m CQ that he came back telling me
that my K3 sounded nice! Thank you Nick! Great Elecraft commaradie...
The K3 was superb during the contest especially on 40m with 300 Hz
DSP. I am still v
Brett Howard wrote:
I'm assuming "short periods" to be several minutes?
The nice thing about a "max" spec is that I don't have to speculate on
how long you could exceed it :)
I'm sure its a ways out but I find it interesting to see a mode to
shut down in an over voltage situation...
We tested it at higher voltages, and it can certainly handle 16 V for
short periods under normal circumstances. But I still recommend 15 V
max.
73,
Wayne
N6KR
Brett Howard wrote:
I know that the max
voltage specified for the K3 is 15V but what about 16? If the V knob
on my
astron got ac
What would be "nice" is for the speech processor to add variable
pre-emphasis that depends on the amount of compression AND still allow
you to use the equalizer to provide additional tailoring to your
individual voice. That way you would only need one equalizer setting
that would work for all comp
Fri 15 Feb 2008 at 01:17:44 EST Alan Bloom wrote
I read years ago that speech processors like pre-emphasized audio
(louder highs, quieter lows). And the heavier the processing the more
pre-emphasis is optimum. Does anyone know if the K3 speech processor
does that automatically?
--
Hi Alan,
Ac
That does sound rather strange, did it fit the K2 (I you have one)?
There is a lot of depth in the K3s fitting, my connectors go 'home' before I
have to do the collar up, that is, the collar on my line sockets will slide
back up from the mating part. Screwing them on and making a good connection
is
--
Original Message: 12
Date: Wed, 13 Feb 2008 05:33:33 +
From: Charles Harpole <[EMAIL PROTECTED]>
K3 with Yet ANOTHER non-standard mic pin-out. Now ham radio has at least 4
...
After reading several responses to Charles' earlier post, and the above fro
Oh, man, now I've gone and created a cross-continent incident. I wasn't worried
about the KXV3, as I knew I'd get it one way or another. My remark was based on
a private email I had with another soon-to-be K3 owner who was also missing the
transverter interface from his initial invoice. My in
I'm typing too fast today... (Also jet lagged after a 20 hour day
working the Orlando Hamfext and flying home late last night.)
I meant to say "Lisa just told me..." ;-)
73, Eric
Eric Swartz - WA6HHQ, Elecraft wrote:
One more note - Lisa just tolds me she -did- receive your correction
One more note - Lisa just tolds me she -did- receive your correction
email and has not had time to reply today. She can receive over a
hundred emails daily, so it sometimes takes a day or two for her to
reply. (Especially on Mondays after the weekend flood of emails ;-)
73, Eric WA6HHQ
Mike,
We are absolutely shipping KXV3s. The reason we include the invoice with
our confirmation message is to have you check it and let us know if
there are corrections or changes.
Please contact lisa at [EMAIL PROTECTED] immediately if anything is
incorrect or if anything needs changing. W
Perhaps it's bad netiquette to answer your own topic posts, but just to add an
additional data point: I received the coveted "Your K3 should ship in 5-9 days"
email from Lisa very late last night. I ordered 6 June. My invoice was also
missing the KXV3, as another list member commented, so pos
Think you have caught the gist of what was ment, however, it can be used in
the more obvious sense
http://en.wikipedia.org/wiki/Look_Back_in_Anger
On 7/2/08 11:55, "Gary Hvizdak" <[EMAIL PROTECTED]> sent:
> in anger
--
Times are bad. Children no longer obey their parents, and everyone is
writ
Nope..
That's about right Gary...
73
Stewart G3RXQ
On Thu, 7 Feb 2008 06:55:33 -0500, Gary Hvizdak wrote:
> Thu 7 Feb 2008 at 04:11:16 EST Stewart Baker (G3RXQ) wrote
>
> ... Of course postings should be limited to those who already
have a
> K3, assembled and used in anger.
>
> --
> For those who
Thu 7 Feb 2008 at 04:11:16 EST Stewart Baker (G3RXQ) wrote
... Of course postings should be limited to those who already have a
K3, assembled and used in anger.
--
For those who only speak American English, "in anger" is a British figure of
speak that loosely translates to "thoroughly". (Stewart
In a recent message, wayne burdick <[EMAIL PROTECTED]> wrote ...
I asked about
When carrying out the power calibration on the K3, I find that TXGN
in the Config[Tech] menu shows: "Pr80 28" when doing the 50W
calibration on 80 metres.
You said
"PR80" means "preamp in use for 80 m tr
David, G4DMP wrote:
> When carrying out the power calibration on the K3, I find that TXGN
> in the Config[Tech] menu shows: "Pr80 28" when doing the 50W
> calibration on 80 metres. It is only on 80m & the 50W calibration
> that I get the "Pr80". On all other bands the Pr80 is not shown
> and I
ursday, January 31, 2008 5:04 PM
Subject: [Elecraft] RE: K3 Tuner
I've never used the auto tuner in my Pro III or
TS-2000x. I didn't order one with my K3 as I hate auto
tuners. Go buy a good old Dentron MT-3000
I'm not wondering if the price will be higher on my
order. I expect each item to be at the price it was at
the time I placed my order(s). Be sure to check your
original confirmation which lists what the prices were
when you ordered.
Dave N8AG
_
Also, $.95 got tacked on to quite a few things. :-)
I'll bet the KRX3 will go up soon after it's available
or perhaps even before. If you want it, order it
nowyou can always cancel later.
Dave N8AG
I've never used the auto tuner in my Pro III or
TS-2000x. I didn't order one with my K3 as I hate auto
tuners. Go buy a good old Dentron MT-3000A. It will
tune anything...
Dave N8AG
Be a better frien
Yeah, I had a little blood rush myself
seeing as how I ordered on May 21.
de Joe, aa4nn
- Original Message -
From: "Dave Agsten" <[EMAIL PROTECTED]>
that Doug received his K3 ordered on May
18th (Was that ordered at Dayton?) and another
notification was sent for a K3 ordered on May 21s
Interesting that Doug received his K3 ordered on May
18th (Was that ordered at Dayton?) and another
notification was sent for a K3 ordered on May 21st.
What happened to all of those Dayton Weekend Orders?
Or did the folks at Dayton all wait until they got
home and placed orders that following week
I'm sorry now that I started all this off !
Just wanted a few more case screws to be included, "in case" (pun)
I lost some...
73
Stewart G3RXQ
On Sat, 1 Mar 2008 07:21:18 -0500, Joe-aa4nn wrote:
> How soon we forget! All the crying and moaning about
> the screws in the K2 and why in the world di
lf Of Joe-aa4nn
Sent: Saturday, March 01, 2008 4:21 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Re: K3/100 Kit #307 Lift Off
How soon we forget! All the crying and moaning about
the screws in the K2 and why in the world didn't Elecraft
countersink those screws. You guys are jus
How soon we forget! All the crying and moaning about
the screws in the K2 and why in the world didn't Elecraft
countersink those screws. You guys are just too much!
de Joe, aa4nn
---
In a recent message, Brett Howard <[EMAIL PROTECT
> Try McMaster-Carr (www.mcmaster.com) PN 91185A221 4-40 1/4 inch long
> with a plastic knurled head 5/16 diameter and 11/64 inch high. They
> only come in boxes of 100, so you would have some to share.
The online catalog indicates that the package size is 25 ... and
if you call, they are oft
>
> I'd be willing to pay a 10 to 15 dollar adder for knurled knobs that allow
> one to take the top of quickly and easily to show off the guts... I'd want
> them to be relatively low profile though.
McMaster-Carr has what you want. Figure out (from the inventory) what
size and length(s) you nee
What a dream come true. I would have had to have boxed up and shipped my
present high-end rig back to Japan four times by now for the same amount of
updates. You guys amaze me!
73,
Terry, W0FM
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL
Oops. Just searched the archives and realized it was a filter assignment
error. Sorry for the bandwidth.
Regards,
Tedd K6OI
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Add
David wrote:
I still think my RTC runs slow by about 8 seconds over 48hrs, but the
jury
is still out on that one and if it does, I doubt there is much you can
do.
The spec is +/- 2 seconds per day, so you're a little high. This means
that the real-time-clock chip's 32 kHz oscillator is runni
My K1 is a few hours' drive away, so I can't test it, but my K2
already does Farnsworth recording. That is, when I record a message
buffer, it tracks the spacing between characters as part of
the memorization process. I just tried this with big gaps and it
works a treat.
Brett - try it on your K1
On Thursday 17 January 2008 09:46:10 pm Joel R. Hallas wrote:
> -- but the key
> data should be out there pretty soon!
I'm really thinking about a 220 volt AC supply in my
basement in New Jersey, whether a voltage doubling
transformer or a two phase to my shack in order to
use and hear my Eddyst
Well said Joel. Keep up the gud work.
Ron WB4OQL
K2 owner.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: "Joel R. Hallas" <[EMAIL PROTECTED]>
Date: Thu, 17 Jan 2008 21:46:10
To:elecraft@mailman.qth.net
Subject: [Elecraft] RE: K3 Product Review in Q
Gents,
Let me put the speculation to rest, since I look at this on a daily basis,
it might make it shorter to read
The ARRL, in our usual disguises to avoid getting a "finely tuned sample"
has actually ordered and received two K3s. One was a "bare bones" 10 W kit
version -- the other a factory b
11:51 AM
To: David Ferrington, M0XDF
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Re: K3 NB indicator flasjing
I believe this indicates that you have set the H/W NB threshold or width
to too high of a value for your current noise or signal levels, which
has the noise blanker activated a
I believe this indicates that you have set the H/W NB threshold or width
to too high of a value for your current noise or signal levels, which
has the noise blanker activated a majority of the time. This will
usually cause an unacceptable amount of intermodulation from adjacent
signals.
Reduc
We are all a bit confused about your name, Oliver
You know, this thread is all well and good, but no-one has yet answered the
original question :)
Which is:
I might have missed this in the manual, but when I change the NB IF width
value, I can get to a point where the NB flashes - what do
You know, this thread is all well and good, but no-one has yet answered the
original question :)
Which is:
>> I might have missed this in the manual, but when I change the NB IF width
>> value, I can get to a point where the NB flashes - what does this indicate?
--
Many ideas grow better when t
Where can I buy a darkness torch, like I used to read in the comics of the 50's
?
David
G3UNA
>
> From: Robert Mccormack <[EMAIL PROTECTED]>
> Date: 2008/01/03 Thu AM 01:13:42 GMT
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Re: K3 NB indicator flasjing
>
Light is merely darkness visible.
73 Ken ZL1AIH
--
Message: 11
Date: Wed, 02 Jan 2008 12:15:06 +
From: "David Ferrington, M0XDF"
Subject: [Elecraft] [K3] NB indicator flashing
To: elecraft
Message-ID:
Content-Type: text/plain; charset="US-ASCII"
I might have m
I am pleased to report the problem is solved
Many thanks to Greg AB7R (do you guys ever sleep??)
Here is his reply:
"Pete,
What mode do you have the K3 in. PSK-D? If so please change it. PSK-D is
not ready just yet (see the errata sheet). PSK work great right now in
Data-A mode with MixW.
W4sc wrote:
Adding TX Inhibit was a great feature to have. Looking at the details
though it seems this function is NOT available when the transverter
interface is enabled.
Hi Ben,
As I'll be explaining in the next edition of the owner's manual, the
XVTR ON signal is just a DC voltage that'
A factory assembled K3/100 with ATU arrived here in New Hampshire
after a 3 day trip from W6 land.
Don't necessarily expect to see a white box..at least initially.
Mine was carefully double boxed,
thank you!! My initial order was placed on April 30th with Lisa for a
"kit" version. However, a
Bill W5WVO wrote:
To clarify -- Will something equivalent to this mode be possible on
the K3 >>IN AM MODE<< -- i.e., without having to absorb the carrier
energy, as when listening in USB/LSB mode? Can I shift the IF passband
in AM mode and listen to just one sideband or the other?
Bill,
In
- Original Message -
From: "Robert Benedict" <[EMAIL PROTECTED]>
Since I use a laptop with my rig I have no parallel or RS232 port lines to
trigger FSK, hence my request for a RTTY keyboard capability as the only
way I see to use Dual PB.
I recommend a SignaLink USB or the more exp
Leigh
Thanks for the response.
you wrote:
I have found a number of confusing issues with the DATA A filters. I
report them to k3support, and eventually they will get fixed. (Some
have already.) If you have reproduceable cases, you can write down the
details and send them in.
I turned these in
Simon
Fair enough. I'm trying to use your program to ease some on the
kinderkrankheiten of the K3 software. I've been trying to find a way to
use the Dual PB filter for RTTY. I have tried three approaches:
1. Mode: Data, Data Mode: A
You can transmit anywhere in the waterfall. Invoking Dual
Hi Bob,
There would be some disadvantages to sending the RTTY / PSK via the KY
command, I honestly think that an external program such as DigiPan,
WinWarbler etc. would be a better option. Displaying the text decoded by K3
is another matter.
FWIW I don't really have time to add this now, I a
Dave
The FSK data mode works with KY commands but not the PSK data mode. I
have used FSK with command macros in Ham Radio Deluxe.
The DM780 digital modes program, also from Simon Brown, now also
supports keyboard CW on the K3. Maybe with a little lobbying Simon will
support keyboard RTTY and
Hello Peter!
During the lowpower wattmeter calibration we appear to have no TX output.
Test indicate no RX either.
Please direct K3 support questions to "[EMAIL PROTECTED]" rather
than the reflector.
Sounds like you may not have the filter enabled, or perhaps one of the
cables between th
Make sure the bit jumper block is in (connects the PA's power). Also,
make sure your filter(s) are set up properly. Make sure the filter
you want to use for transmit is enabled, etc.
matt - WA6EGJ
k3 # 24
On Sat, 15 Dec 2007 20:16:32 +1300, you wrote:
>Good afternoon/evening fromZL
>
>We have
Just for those waiting (sorry about the b/w to those who aren't).
Got my 'shipping' notification at 00:09z this morning, scheduled to arrive
on Mon - that's fast!
On 9/12/07 13:24, "David Ferrington, M0XDF" <[EMAIL PROTECTED]> sent:
> I received my Invoice confirmation at 23:58 last night (Sat) -
Good afternoon/evening fromZL
We have assembled the k3 and run the initial test stages and have run into a
problem.
During the lowpower wattmeter calibration we appear to have no TX output.
Test indicate no RX either.
Yes we have upgraded to the latest firmware, 01.49
Any suggestions???
Pe
Bob,
The firmware revision we're now testing allows noise reduction at all
CW filter bandwidths. Sorry for the temporary inconvenience.
73,
Wayne
N6KR
On Dec 14, 2007, at 1:48 PM, Bob Patten wrote:
I have the 400 cycle 8 pole optional filter and was disappointed with
the latest firmware to
Thanks to all of those who answered on and off the list. It is working
now. The configuration that is working for me is:
On the K3 - PTT-KEY is set to Off-dtr
N1MM is set to CW for DTR and always off for RTS.
I am able to key via the paddles and/or N1MM.
73,
:) PK (Paul - K3MZ K2 #3135 K3 #8
Many thanks to all who responded to my question!
73, John, W2GW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/lis
Regarding the overflow of messages on things we cannot change, there
are some we can.
could we put in the subject line K3 SHIPPING
as in radio = K3
interest = shipping , or for that matter lack of shipping.
that way those of us who has set our email clients to deal with
With the KBPF3 installed, I can tune to 500 KHz and no lower.
Attempting to input 490 gives 500 KHz.
matt, WA6EGJ
K3 s/n 24
>Thanks for the information, everyone. I was just curious, as the FAQ only
>states
>that coverage begins at 500 kHz. As with many things in life, that can be read
>more th
Thanks for the information, everyone. I was just curious, as the FAQ only states
that coverage begins at 500 kHz. As with many things in life, that can be read
more than one way (as I alluded to in my original posting).
73,
Mike
KW1ND
___
Elecraft mail
Dick
Thanks for your interesting email, much appreciated and understood.
Long live Elecraft
73
Robert G3RCE
Well, speaking as someone with an "almost" big-gun station, SNIP
-
At times it's been difficult to raise legitimate criticisms
of th
[EMAIL PROTECTED] wrote:
3. Use VFO A to select which character to change.
4. Use VFO B to select a character (A-Z, 0-9, and various symbols).
On my K3 it's VFO A that selects the characters and VFO B that selects
the
character place/order.
I reversed A and B, above. Thanks for catchin
[Elecraft] Re: K3 - qsk keying loop
Dick Green WC1M wc1m at msn.com
Hi Dick,
Happily, the K3 is modular. Would I be incorrect to
assume that a hardware solution could be engineered to
perform this specific purpose, and reasonably
inexpensively?
All it would really take would be for Eric and
Pardon me for jumping in here. I don't have a K3 and don't have one on
order. I'm trying to make that decision. I've read a lot of good things
about the K3. Absence of a keying loop isn't one of them.
Although it's true that some modern QSK amps may appear to work fine without
a keying loop, be
Gentlemen-
It now says on the elecraft website that the second run will be shipping
starting the end of the month. I thought I'd need counciling , but alas my
K3
may soon ship after six months of Zen patience. I read that buyers
prior to May 14th who gave deposits were given the first available ra
Thanks for the photo Craig, but a more pressing question for me would be-
How about a photo of a K3 next to, or on top of, a Yaesu FT-1000MP?
A lot of contesters will be selling MPs, or at least making room next to one
on the bench for a K3 and I'd sure like to get a better feel for the
relative
This is an internal gain calibration step that requires power to be set
at exactly 5.0 and 50 W respectively. There's no need for an accurate
wattmeter at this point. The K3's watt metering can optionally be
calibrated in a later step (CONFIG:WMTR).
We'll clarify this in the manuals.
73,
Wayn
> Speaking of filters, I find it amusing that there's a 2.1kHz
> filter available (I have one), but the WIDTH value jumps from
> 2.2 to 2.0 kHz.
It's been on the firmware issue list for some time now. Wayne is working on
higher priories, and I'm glad he is!
73,
Ed - W0YK
_
Hi Jim,
The K3 uses completely different (and smaller) filter carrier boards.
Your MK5 filters could in theory be removed from the existing carriers
and put onto ours, but I'm not sure if we can supply empty carrier
boards for customer use. I'll have to run this one by Eric.
Another consider
I suspect there's going to be some very nice QRP rig designs that use
2.7kHz filters at 8.215 MHz.
Speaking of filters, I find it amusing that there's a 2.1kHz filter
available (I have one), but the WIDTH value jumps from 2.2 to 2.0 kHz.
73, doug
From: wayne burdick <[EMAIL PROTECTED]>
Dat
Two followup comments. (1) I can't put a date or specs on the variable
filters yet. (2) Ebay is a good place for previously-owned fixed
filters.
:)
73,
Wayne
N6KR
On Nov 19, 2007, at 1:42 PM, David Ferrington, M0XDF wrote:
That looks like a very good plan - Wayne, you've just done yourself
That looks like a very good plan - Wayne, you've just done yourself out of a
2.1kHz sale!
I'll wait for the variables.
Now should I swap my 400 for a 200?
On 19/11/07 21:24, "wayne burdick" <[EMAIL PROTECTED]> sent:
> One of the variable-passband filters we've been considering is one for
> SSB, w
One of the variable-passband filters we've been considering is one for
SSB, with a range of about 1.4 to 2.2 kHz. It would have 5 poles rather
than 8, but I'm sure it would work well in combination with the I.F.
DSP. The MCU would automatically dial in the crystal filter bandwidth
to match the
Ian J Maude wrote:
wayne burdick wrote:
If you have stereo headphones and/or two speakers plugged into your
K3, you can use the AFX (audio effects) function
2 questions Wayne..
1) Can you do this with only one receiver installed?
Yes -- that's the main use of AFX. If both receivers ar
John,
This particular error message is related to the synthesizer module.
We'll contact you shortly with further info.
Note to all: Please report K3 problems to [EMAIL PROTECTED],
rather than the reflector, so we can track them and give you the
fastest turnaround with customer support.
tnx
In a message dated 11/14/2007 3:25:19 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Craig D. Smith wrote:
> <> When you tap XFIL to rotate through the filters the discrete FLn
> indicator lights up for that filter and also the VFO B display says
> "FL3 0.40",
> "FL4 0.25", etc. So yo
In a message dated 11/14/2007 3:25:19 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Craig D. Smith wrote:
> <> When you tap XFIL to rotate through the filters the discrete FLn
> indicator lights up for that filter and also the VFO B display says
> "FL3 0.40",
> "FL4 0.25", etc. So yo
I have the sticky note, I just the need the K3 to stick to it!!
Patiently waiting !!
David, VK2NU
Thanks, all, for the quick and meaningful response. The above behavior will
help a lot. Guess I won't need that "Sticky note" pasted to the front of my
K3 afterall<
__
Change a setting to find out what a setting was... Hmmm... I'll have to
give that some thought.
Regards,
Dick - KA5KKT/4
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
601 - 700 of 1085 matches
Mail list logo