Re: [Elecraft] [K3] clarification on VFO and 2nd Rx

in diversity split because of settling time and needs for fast qsk. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mai

[Elecraft] Mic selection (was K3 - very brief first impressions)

es the mic input during DVK'ing (via software, turns mic gain to 0 during DVK'ing and then restores mic gain after DVK'ing). 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the li

[Elecraft] Rick Tavan's excellent K3 article

own and tested the QSK and can report at how high a keying speed the K3 receiver recovers between dits? The cw rise time and rx AGC settings used for the test would also be useful to know. Thanks & 73, Barry N1EU ___ Elecraft mailing list Post to: El

[Elecraft] N1MM and SSB and audio

'm happily clueless about them. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraf

[Elecraft] RE: Elecraft K3 - shiping status ?

What is the current shipping status - and - are you shipping assembled units as well as kits? Thanks, Barry (WK2S) On Friday afternoon, Eric Swartz wrote ... I'll post a shipping status update later this weekend. I want to wait to see how we did this week. (We shipped a lot :-) As I

[Elecraft] OT: pwr rating of RG6, etc

he line. Yes, topbanders use tons of it, but as long inexpensive receive-only Beverage feedlines. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, s

[Elecraft] K3 selectivity display?

Is there any numeric indication of the K3 rx bandwidth on the display? I see the trapezoidal analog display of relative bandwidth, but if the dsp bandwidth is set to 300hz, does the K3 indicate such directly to the operator? Thanks & 73, Barry

Re: [Elecraft] K3 selectivity display?

ealize the work-around will be to adjust it in order to read it. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/m

[Elecraft] K3 Covers

, but the total cost seemed ok.) It took about 2 weeks. Barry, WK2S ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman

[Elecraft] clarification of SSB tx bandwidth

transmitting with 2.7Khz bandwidth? DSP filtering is not being used to allow user selectable tx bandwidths less than 3.0Khz? Thanks & 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

[Elecraft] SSB contesting

the front in parallel with the mic. Hopefully there will be software support (N1MM Logger?) that will enable rear line-in during DVK'ing and switch back to front panel mic otherwise. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mail

[Elecraft] SSB contesting

, if the user goes the "y" route, they definitely need to add their own isolation xfmr between soundcard and mic jack. I should have mentioned this in my previous post. 73, Barry N1EU On Nov 19, 2007 1:03 PM, Lyle Johnson <[EMAIL PROTECTED]> wrote: > Hello Barry! > > &g

[Elecraft] K3 user registry link?

Actually, for the K3 you should try http://www.zerobeat.net/mediawiki/index.php/K3_Serial_Numbers 73, Barry N1EU >Try http://www.zerobeat.net/qrp/elowners.html >Bruce Bowman, NM5B >Santa Fe, NM >> Sorry for the bandwidth, but I can't find the matching post. What is &

[Elecraft] K3 - qsk keying loop

I'm surprised to notice no provision for tx enable/inhibit signals (qsk keying loop) on the K3. I'd appreciate hearing comments on why this wasn't part of the design and what the timing safeguards are in the existing "key out" signal to prevent hot switching on make/b

Re: [Elecraft] K3 - qsk keying loop

text refers to the "ACC" labeled connector as "AUX I/O" - shouldn't this be consistent? I believe there's an omission in the manual - TX INH is not listed in the CONFIG menu section and I believe it should be. 73, Barry N1EU On 11/28/07, Don Wilhelm <[EMAIL PROTECT

[Elecraft] K3 - qsk keying loop

pective K3 contesters. 73, Barry N1EU >Don, in the email below, says that the time delay in the K3 will accommodate a QSK amp. That is only partially true. The problem is in setting it up. I could, of course, put in a LONG delay but then QSK is gone. If I crank the delay down, at some point I

[Elecraft] K3 filters

Simon, what was the dsp selectivity set at when you're using the 1Khz and 250hz roofing filters? Was it likewise 1Khz and 250hz? 73, Barry N1EU >Here's a WAV recording ftp://ftp.ham-radio.ch/common/K3%20CW%20Demo.WAV ___ Elecraft mailing

[Elecraft] K3 filters

Additional recordings would be great - from you or any other K3 owners out there with a soundcard. 73, Barry N1EU >It's a 16-bit mono recording taken via the line-out using a high-quality soundcard (USInterface.com Navigator). The K3 operator isn't all that skilled but he's got half

[Elecraft] K3 display for contesters

m for all kinds of comments, laudatory and critical. Everybody's motivation is making the K3 the best radio out there, and it's off to a great start. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subsc

[Elecraft] K3 in action

Great little clip Eric! How about a full length feature? Nice to hear the K3 sounding good on cw. 73, Barry N1EU >http://www.liveleak.com/view?i=10f_1196591072 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber

[Elecraft] Bandpass filter tutorial (was K3 Filters)

ore ringing. >The above is true for both digital and analog filters. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://ma

[Elecraft] K3 display for contesters

>Barry N1EU, regarding your comment about shape factor, I assume you know about the K3 Context filter. Yes Bill, and I look forward to seeing how it works. But the filter slopes on the context filter are not adjustable either so we're talking apples and oranges. If the firmware can

[Elecraft] [K3} More on K3

e the parameter display right into their program or else to read the K3 data and make it available through an OLE interface to external programs. 73, Barry N1EU >I propose that an item for the SW development list (if it isn't there already) be a Windoze app that takes all key parameters

[Elecraft] Line in/Line out audio freq. response

Simon, any chance you could make about a 10sec recording of band noise on an empty band with RX EQ set flat and 6Khz selectivity and either post the WAV file or email it to me? Thanks/73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft

RE: [Elecraft] K3 vs. Tentec Omni-VII

Off the top of my head, Omni 7 has a big beautiful display and has TCP/IP ethernet remoting built into it. To my eyes, these are two VERY different radios. Why don't you download both manuals from the mfr's Web sites and compare for yourself? 73, Barry N1EU Another way to ask th

[Elecraft] K3 Assembly

ce without having to search through the archives. 73, Barry N1EU >On another point, there was criticism of someone posting an assembly question to the reflector. That is the whole point of the reflector, simple "how does it fit" or "where does that go" questions are easily re

[Elecraft] Microphones

is there any other way to use the SM20 without rewiring the plug. I really don't want to sell the SM20 when I come to sell the PRO3 on purchase of the K3. Seasons greetings and 73 to all. Barry Simpson VK2BJ ___ Elecraft mailing list Po

Re: [Elecraft] K3 or SDR-5000?

It would be very cool if some future generation of PowerSDR software provided a clickable bandmap overlay to the displayed spectrum from the K3. Functions such as quick qsy to any point in the spectrum and labeling of sigs with callsigns would be great tools for dxing/contesting. 73, Barry N1EU

Re: [Elecraft] K3 or SDR-5000?

cally oriented spectrum that would parallel the bandmap and move/resize in tandem with it. That would sure sell a bunch of K3's (as if they were sitting on the shelf already . . . . ;-) 73, Barry N1EU -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I think he was looking for an N1MM type band map

[Elecraft] Roofing Filters

I am about to take the plunge and order a K3. Does it accommodate five roofing filters in addition to that supplied or is it limited to five in total ? Merry Christmas to all. 73 Barry Simpson VK2BJ ___ Elecraft mailing list Post to

Re: [Elecraft] Q about the K3 rear panel

You can connect the subreceiver to a rx ant via the aux RF jack, without having the KXV3 option. See "Antenna Selection" at http://www.zerobeat.net/mediawiki/index.php/K3_Stereo_Diversity_Reception_and_SO2V_Contesting 73/HNY, Barry N1EU DaleJ wrote: > > I'm trying to cl

Re: [Elecraft] If you can't get a K3 second choice?

Get a used Orion I - a bargain at around $2K and you'll be able to resell it for little loss when your K3 is ready. 73, Barry N1EU Just wondering what Rig would be your second choice if you can't wait forever to get a K3? -- View this message in context: http://www.nabble.com/

RE: [Elecraft] New K3 SN#207 built but question on AM Filter

This is admittedly topic skew, but for non-critical occasional am listening, it would be nice to have a much lower cost option than the $120 filters. A cheap ceramic or 2-xtal filter, about 15Khz bw would have been a nice addition to the K3, maybe even as a st'd component. 73, Barry

Re[Elecraft] quest for K3 recording - 2.8Khz filter

electivity that will still allow the 2.8Khz filter to be engaged please tune to an empty spot on any band - I just want to hear the band noise and run a spectral plot Thanks & 73, Barry N1EU -- View this message in context: http://www.nabble.com/Request-for-K3-recording---2.8Khz-filter-tp149

Re: [Elecraft] TRANSLATION: K3 Subreceiver Status Update (KRX3 option)

loped") totally depends on the context of comparison and how quickly you're apt to butt up against the radio's limitations. In tough band condx, I don't think it would be much of a comparison. 73, Barry N1EU David and Dianne on Comcast wrote: > > Hi Everyone, > > T

Re: [Elecraft] K3: KAT3 as RX-only

Mike, I don't think the K3 will do what you think it will. The non-transmit antenna (ANT1/ANT2) can't be used by the main receiver, only the subreceiver. Look at figure 3 on p39 of the manual. I'm sure someone will correct me if I'm wrong. 73, Barry N1EU Mike B-12 wr

Re: [Elecraft] K3: KAT3 as RX-only

ntenna. > > 4. Main on any of the above and sub on AUX RF. (Antenna Selection details) > Brett, under your option #1, you failed to mention the constraint that ANT1 or ANT2 selection for the receivers must match the transmit antenna selection. This was the essence of Mike&

Re: [Elecraft] KRX3 Shipping Date

t to say was "April foolish" , ja? 73, Barry N1EU -- View this message in context: http://www.nabble.com/KRX3-Shipping-Date-tp15029880p15031897.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: E

[Elecraft] K3 ssb tx passband

assband is adjusted to at the factory with the stock 2.7Khz filter? Thanks/73, Barry N1EU -- View this message in context: http://www.nabble.com/K3-ssb-tx-passband-tp15043223p15043223.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecra

[Elecraft] MH2 handmicrophones

Ron - somewhere way back (months ago) there was a comment by one of the Elecraft folks that the "new" HM2 has been improved in terms of interior mechanical construction. From that comment, I inferred that electrically they are the same. B

[Elecraft] Remotely controlling a K2

to the above VNC "server", control you Mac and run K2 control program. Here's a link to a VNC "viewer" that run on Windows -> http://www.realvnc.com/products/free/4.1/winvncviewer.html Here's the schematic ... Windows -&g

[Elecraft] Favourite bands

Glad to see that I am not the only Steely Dan fan. And 40m is pretty good too ! 73 Barry Simpson VK2BJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub

[Elecraft] KSB2 Bandwidth modification

Question for the K2 listserv. I have a K2 (s/n 377) and the KSB2 with the normal 2.1 KHz. bandwidth configuration. I get excellent audio reports but it is narrow. I'm thinking of purchasing another KSB2 board and want to make it either 2.4 or 2.6 KHz. For any who may have made

[Elecraft] K3 subreceiver/diversity

o each receiver? Can both receivers be tuned with the same vfo? Can RF Gain be independently adjusted for main/sub rx (eg., using low gain rx ant on subrx)? Thanks & 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] Re:K3 has dual VFOs, with common or independent modes/bands

both the mainrx and subrx frequency. 3. Single button press that would "push the context" of the main receiver to the subreceiver if the receivers are otherwise acting independently. Thanks & 73, Barry N1EU ___ Elecraft mailing list Pos

[Elecraft] K3

it should be predictable based on the dynamic range downstream. 2. I NEVER use the Hi/Lo Cut controls (in favor of Width/PBT-Shift) and not sure that anyone else does. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be

[Elecraft] Re: K3 diversity reception

AE6WA asked: "Will the K3 allow the second receiver to be connected to a second antenna? This would allow spatial or polarization diversity reception." FYI, this was previously asked and answered - see http://mailman.qth.net/pipermail/elecraft/2007-April/066568.html 73,

[Elecraft] K3 SQL control suggestion

I'd like to suggest a K3 feature for the ability to optionally reassign the SQL control to subreceiver RF Gain. This would make for a beautifully symmetric pair of AF and RF Gain controls for main and sub receivers, which would be great for frequent users of the subreceiver. Thanks &

[Elecraft] Now that we've covered roofing filters, a Q on subreceivers

http://n1eu.com/orion/so2v.htm 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] K3 Crystal Filters and Dynamic Range - D.R. impact and my basic recommendations

he K3 will be able to transmit through the stock 2.7Khz filter and switch in a narrower filter when receiving. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. C

[Elecraft] group delay distortion

le to pull out weak cw signals or rendering them unreadable. 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/ma

[Elecraft] K3 Microphone question

The wiring for the K2 MD-2 microphone and the Heil headset has 5V applied to pin 1 through a 5.6k resistor. Will the K3 supply 5V on pin 1? Thanks, Barry (WK2S) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to

[Elecraft] Yaesu FT-2000 v K-3?

I've never owned an FT-2000, but I can't help but wonder at the relatively high number of used FT-2000 radios offered for sale (eham.net, qth.com) - it sure seems that a significant portion of new owners are having issues with the radio. 73,

[Elecraft] K3 microphone wiring ?

some sort of configuration option? If not, I don't think the current Elecraft microphones will work properly. Thanks, Barry (WK2S) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subsc

[Elecraft] K3 Memories

Hi How are the 100 memories tuned. I cannot see any multi or memory channel knob for such a function. I cannot see any explanation in FAQ other than in relation to the quick memories. 73 Barry Simpson VK2BJ ___ Elecraft mailing list Post

[Elecraft] K3

O - M and M-VFO. Some info would be appreciated. 73 Barry VK2BJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qt

[Elecraft] K3 Design

never use." Unless I'm mistaken, I AM being forced to pay for an ATU option in order to get a 2nd antenna input and to pay for a transverter option to get a rx antenna input. I'm thrilled about the K3, just not thrilled about this part of

[Elecraft] K3 - SO239 at ANT2 option

nput for the main rx with the ANT1 input for transmitting. This setup is for diversity reception with two rx antennas. ANT1 - transmit antenna KXV3 - rx antenna to main rx ANT2 SO239 (no KAT3) - rx antenna to sub rx Can someone please confirm this will be doable from the outset of K3 production?

[Elecraft] K2 mike question...

Steve - I believe the answer to your question, "Can the Heil GM-4 work with the 10k hooked up from AF to 5V?" is yes. The Heil Icom cables for the GM microphones have a capacitor that isolates the 5V from the GM microphone element. See the description of the Icom setup on the Heil web site ->

[Elecraft] K2 Serial Number 6205

manuals (all have been documented in the last few weeks) and one hiccup with the VFO coil, otherwise it works and built as advertised. 73 Barry GM4TOE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the

[Elecraft] K2 Low transverter drive level

: Without KAT100 9 pin connector connected full range transverter Tx drive output; with the ATU linked in the maximum transverter drive is 0.2mW. I cannot find anything on this list to help, is there somebody out there with a suggestion please? 73 Barry GM4TOE

RE: [Elecraft] K2 Low transverter drive level

reaction from Don) offered from this email list, it cannot be bettered. 73 Barry GM4TOE -Original Message- From: Don Wilhelm [mailto:[EMAIL PROTECTED] Sent: 11 September 2007 14:25 To: Barry Horning Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K2 Low transverter drive level Barry

RE: [Elecraft] K2 Transmit audio bubbly

Is your KAT100 grounded - I had a barrow load of problems when I forgot to do this 73 Barry GM4TOE Barry Horning .Box and Clock maker A'anside Studios www.aanside.co.uk www.scottish-gifts-online.co.uk -Original Message- From: eKotz [mailto:[EMAIL PROTECTED] Sent: 15 Sept

RE: [Elecraft] Elecraft / HexKey discovery

Hi Ken et al I had exactly the same problem when I tried out my Begali Simplex !! I cured it by replacing the stock feet with some sturdy rubber stick on feet 73 Barry Simpson VK2BJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You

[Elecraft] DSP Shape Factor and Weak Signals

igs out of high noise on the Orion. Will the K3 afford adjustability of the DSP filter shape? 73, Barry N1EU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub,

[Elecraft] 3rd party K3 software utility?

Are there any 3rd party software utilities available that will store profiles with different tx setups including TX EQ? Thanks & 73, Barry N1EU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K3 USB interface

ot; Is there a trick I'm missing? Thanks & 73, Barry N1EU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] K3 USB interface

Sorry, I switched computers and it worked like a charm. I've got a computer issue I need to troubleshoot I guess. Sorry for the bandwidth. 73, Barry N1EU On Mon, Dec 7, 2015 at 9:32 PM, Barry N1EU wrote: > I'm trying to get a K3S talking with N1MM Logger+ for the first time. >

Re: [Elecraft] Advice on First HF Antenna

7; above ground. This height prevents clothes lining friends and relatives, and no radials are required. There are other antennas. Each has something good or bad, price, performance, difficulty, etc. My belief is simple is best. And, the same should be true field work. 73, Barry K3NDM

[Elecraft] P3 SVGA help

My monitor reports "no signal" from my P3 SVGA. I've gone into the menu and enabled SVGA and set the resolution. Is there anything else I need to do? Thanks & 73, Barry N1EU __ Elecraft mailing list Home: http://mail

[Elecraft] P3 transmit monitor

I'd like to hear from folks who've owned the P3 transmit monitor for a while. Can you please comment on why you do (or don't) find it useful in day-to-day operating? Is it a tool you use often, just a cool toy, etc ??? Thanks &

[Elecraft] P3 cw waterfall

Is the waterfall speed adjustable? Any brilliant insights on optimal cw waterfall setup gratefully appreciated! I'm an old fan of the cw skimmer waterfall with traces so clear you can easily read the cw dits/dahs. Thanks & 73, B

Re: [Elecraft] OT: B & W antenna

If memory serves, that antenna is a variant of the T2FD and should have a 490 Ohm resistor in it. As you go higher in frequency, it becomes more efficient as the resistor will need to absorb less energy; the resistor is rated at 1/3 the antennas power rating at the low end. 73, Barry K3NDM

Re: [Elecraft] P3 cw waterfall

Can someone please describe how to simply change the speed of the waterfall? The update rate doesn't change it. Thanks & 73, Barry N1EU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft H

Re: [Elecraft] OT looking for K3EZ utility

I don't think it's available any longer. Perhaps someone has a copy of the install files they can make available? Thanks & 73, Barry N1EU On Thu, Dec 10, 2015 at 9:57 AM, Kjeld Holm wrote: > Hi Elecrafters > I find the utility K3EZ very useful. Going to a new computer I sea

Re: [Elecraft] P3 cw waterfall

eriod (rate) directly and obviously changes the waterfall speed. And the P3? Thanks & 73, Barry N1EU On Thu, Dec 10, 2015 at 3:29 PM, d...@lightstream.net wrote: > Barry, > > It's as Fred said, it changes as a function of the "Rate" setting when > running in the

Re: [Elecraft] P3 cw waterfall

Okay, what I think is tripping me up is the P3 internal waterfall speed IS varying with update rate but the SVGA waterfall speed is not. Barry N1EU On Thu, Dec 10, 2015 at 11:08 PM, Barry N1EU wrote: > Sorry for my dimness, but I've tried Tracking mode and Fixed-Tune > mode, varying

Re: [Elecraft] Antennas with resistor and OCFD.

ately than antennas, with maybe the differences between Windows and the Apple OS. 73, Barry K3NDM -- Original Message -- From: "Brian D. Comer" To: elecraft@mailman.qth.net Sent: 12/10/2015 7:14:24 PM Subject: [Elecraft] Antennas with resistor and OCFD. I think stating

Re: [Elecraft] P3 transmit monitor

Can you get a relative assessment of the degree of compression (speech processing) by viewing the ssb waveform in the P3 TX monitor? Barry N1EU On Thu, Dec 10, 2015 at 8:30 PM, Nate Bargmann wrote: > * On 2015 09 Dec 08:13 -0600, Barry N1EU wrote: >> I'd like to hear from folks wh

[Elecraft] K3s subreceiver antenna not normally disconnected during transmit?

If I'm reading the manual correctly, the K3s subreceiver (KRX3) antenna is NOT normally disconnected by a relay during transmit, although there's a carrier-operated protection relay in-line. Am I correct in this regard? Thanks &

Re: [Elecraft] Receivers?

ay depending on which of our many antennas are being used at the time. And secondly, all of our radios are using the 8 KHz offset. I was amazed at the demonstration the first time it happened. I would say that the KX3 can handle any intelligently crowed environment. 73, Barry K3NDM -- O

Re: [Elecraft] Receivers?

d far enough away, you will know he is there, but you may be able work through him. Hopefully, this reads better. But, remember I said we keep our antennas as far apart as we can and we operate QRP. 73, Barry K3NDM -- Original Message -- From: "dave" To: "Barry LaZar&quo

[Elecraft] Getting Logger+ tx audio via K3s USB audio codec

x audio being driven? Thanks & 73, Barry N1EU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http:/

Re: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec

Thanks Fred, I didn't. I've got Mic+Lin working fine with another soundcard but can't get the USB audio to play through. 73, Barry N1EU On Sat, Dec 12, 2015 at 2:01 PM, Cady, Fred wrote: > Hi Barry, > Make sure you don't have a cable plugged into the K3s Line In jack.

Re: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec

ndows Sound Playback level jumping up and down as expected - audio is going to the device Push PTT on K3s and absolutely no tx audio Is there anything I'm possibly missing? Thanks & 73, Barry N1EU On Sat, Dec 12, 2015 at 1:46 PM, Barry N1EU wrote: > Would appreciate any tips to gettin

Re: [Elecraft] Receivers?

ion of the same band. I may have a bit clumsy with the my definition on this one. Bottom line: my original point is that the KX3 does survive quite nicely in what I would call an RF hostile environment. Will it wilt when things get really crazy? Yes, it will along with every other radio.

Re: [Elecraft] Getting Logger+ tx audio via K3s USB audio codec

yes, it's already max On Sat, Dec 12, 2015 at 6:16 PM, Rick WA6NHC wrote: > Have you set the output levels on the OS driver? In mine, that should be at > or near max output... > > Rick nhc > > > > On 12/12/2015 8:59 AM, Barry N1EU wrote: >> >> I

Re: [Elecraft] K3 EZ

I know you need to have the MS.Net Framework installed to run K3 EZ 73, Barry N1EU On Sun, Dec 13, 2015 at 1:16 PM, NZ0T wrote: > Has anyone been able to get K3 EZ running in Linux with WINE? I use Mint for > my primary OS and would like to use K3 EZ there. I have Win 10 dual booted >

[Elecraft] K3s USB audio

rding. Has anybody else tried this? Thanks & 73, Barry N1EU On Mon, Dec 14, 2015 at 12:44 AM, Chris wrote: > Have you set your mode to digi my k3 only tx audio when I use it in digi mode > not lsb or usb or cw > &

Re: [Elecraft] K3s USB audio

It doesn't work with N1MM Logger+, probably the top application for using SSB audio through the USB codec. I believe the N1MM team is investigating. 73, Barry N1EU On Mon, Dec 14, 2015 at 2:20 PM, Ed Muns wrote: > The Codec deals with digitized audio of LINE IN and LINE OUT, indepe

Re: [Elecraft] Compatability of K3 EZ and the K3s

Yes 73, Barry N1EU On Mon, Dec 14, 2015 at 8:15 PM, johnpierce wrote: > Has anyone used the K3 EZ software on a windows computer with the K3s? Is > it compatible? > > > > John, AD2F > > __ > Elecraf

Re: [Elecraft] K3s USB audio

er to transmitter. 73, Barry N1EU On Mon, Dec 14, 2015 at 9:33 PM, Cady, Fred wrote: > No problem here with N1MM+ playing wav files through the USB audio codec. Or > with WSJT or MMTTY. > In N1MM+ you have to (or can) have the wav files in a directory > ../wav/{operator}/...wav where

Re: [Elecraft] K3s USB audio

I have it working now, thanks for the helpful suggestions. I don't know why it's suddenly working, I didn't change anything. I'll keep an eye on it. 73, Barry N1EU On Mon, Dec 14, 2015 at 10:01 PM, Cady, Fred wrote: > Hi Barry, > Have you tried using the K3s regular

Re: [Elecraft] K3/2K-FA int.

Thanks for posting this Roy. Not one mention of the loud relay in 31 eHam reviews and it's something that obviously would bother some of us (me) more than others. 73, Barry N1EU On Thu, Dec 24, 2015 at 8:03 AM, Roy Koeppe wrote: > " looking for input on how well the K3 will integ

Re: [Elecraft] P3 vs. other panadapter options

options is the integral telnet connection that will paint a bandmap superimposed on the spectral display. 73, Barry N1EU On Thu, Dec 24, 2015 at 11:47 AM, Juliean Galak wrote: > I'm planning on getting a K3s and am wondering about panadapters. There's > obviously the P3, but there

[Elecraft] headphone impedance

Is there an acceptable range of headphone impedance for the K3/K3s? I've got some 300-ohm headphones and wondering if the impedance alone makes them a poor choice for my K3s? Thanks & 73, Barry N1EU __ Elecraft mailing list H

Re: [Elecraft] headphone impedance

Thanks for all the public and private responses! My 300-ohm headphones should not be a problem for the K3s. 73, Barry N1EU On Mon, Dec 28, 2015 at 10:20 AM, W2RU - Bud Hippisley wrote: > The headphones I have used for over a decade are 600-ohm high-end stereo > high-fidelity phones. I

Re: [Elecraft] headphone impedance

I believe this also means that the K3 headphone output circuit will deliver 10X power (with fixed V, P~1/R) into a 30-ohm headphone as a 300-ohm headphone, so at some point the amp might clip as you raise the headphone impedance? Barry N1EU On Mon, Dec 28, 2015 at 12:57 PM, Jim Brown wrote

Re: [Elecraft] K3 comments on Koss SB45 headsets

give them a thumbs up if you need an isolating type headphone, although I prefer the higher priced Beyer DT770M. If you don't need the isolation, I prefer the more comfortable and better sounding circumaural open-back Sennheisers. 73, Barry N1EU On Tue, Dec 29, 2015 at 12:02 AM, AB2E Darr

Re: [Elecraft] headphone impedance

dphone impedance and efficiency that makes up for the inverse relationship between output power and load impedance. I just don't observe this efficiency rule consistently in my collection of headphones with varying impedance. Headphone efficiency clearly has other dependencies than impedance.

<    1   2   3   4   5   6   7   8   9   10   >