Re: [Emc-developers] Moving closer to embedded

quot;, -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com -- ___ Emc-dev

Re: [Emc-developers] Tool Not Changed

essage-ID:<56743f96.5000...@gnipsel.com> > Content-Type: text/plain; charset=windows-1252; format=flowed > > If your tool changer is ran with classicladder then you can abort the > program when all is not well. > > JT It is completely ran by classicladder. What input should I hit to

[Emc-developers] Tool Not Changed

the same operation as hitting the "ESC" and "F6" keys when initiated, abort a running program, reset the interpreter, etc. -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1

Re: [Emc-developers] Tool Table and Wear offset Table

We are on the right track, I just need to get everything ironed out on my end in regards to using gmoccapy. We do not though, expect to see the subroutine in the loaded gcode window. Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -Original Mes

Re: [Emc-developers] Tool Table and Wear offset Table

backplot jumps from the picture of the part and goes back to the 0,0 point of the display, We are using gmoccapy if that makes a difference? Any thoughts, Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -Original Message- From: andy pugh [mailto:b

Re: [Emc-developers] Tool Table and Wear offset Table

fsets T10001 numbers are working just fine, Back to the drawing board I guess Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -- Infragistics Professional Build stunning

Re: [Emc-developers] Tool Table and Wear offset Table

B0.0 C0.0 U0.0 V0.0 W0.0 D0.0 I0.0 J0.0 Q0.0 ;comment T16 P16 X-7.2211 Y0.0 Z8.4012 A0.0 B0.0 C0.0 U0.0 V0.0 W0.0 D0.0 I0.0 J0.0 Q0.0 ;comment T17 P17 X-7.2492 Y0.0 Z7.0874 A0.0 B0.0 C0.0 U0.0 V0.0 W0.0 D0.0 I0.0 J0.0 Q0.0 ;comment Thanks Rick Lair Superior Roll & Turning LLC. PH: 734

[Emc-developers] Tool Table and Wear offset Table

uxCNC project, and a lot of things take precedent over minor things like this. Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -- Infragistics Professional Build

Re: [Emc-developers] Sample Configs layout

clarifies what is going where and how things are working. When reading the description in the beginning of the Fanuc tool offset patch it sounds contradicting as to exactly what is happening and where the numbers go in to the tool table. Many Thanks Rick Lair Superior Roll & Turning LL

Re: [Emc-developers] Sample Configs layout

!!! Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -Original Message- From: emc-developers-requ...@lists.sourceforge.net [mailto:emc-developers-requ...@lists.sourceforge.net] Sent: Friday, August 01, 2014 11:22 AM To: emc-develo

Re: [Emc-developers] Sample Configs layout

than that? Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -- Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of

Re: [Emc-developers] Tool/Wear Offset Option, offspin of Tormach GUI

I can say for sure that there would never be any more than one offset in use at any given time. They may use different offsets on the same tool in the same program, example, you have a shaft you are turning that has 4 different diameters on it, you can use the same tool to run the whole shaft, and

[Emc-developers] Tool/Wear Offset Option, offspin of Tormach GUI

The wear offset values are stored on the same tool table as the actual tools, they just use the numbering of 10001, 10002, 10003, etc Which sometimes can get confusing, if the operator is in a hurry, and fat fingers the wrong row on the table? Thanks Rick Lair Superior Roll

[Emc-developers] Tool/Wear Offset Option, offspin of Tormach GUI

Thanks Rick Lair Superior Roll & Turning LLC. -- HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable.

[Emc-developers] Tool/Wear Offset Option, offspin of Tormach GUI

My two cents, As longs as the way the tool/offset call is made and a table to store the fixed "tool" offsets and a possible second table to store the Assignable "wear" offsets, is the same as the way we do it with the Fanuc Style Patch, is really the important part to us. It is here nor there ho

Re: [Emc-developers] Tormach GUI

Hello Daniel, Have you guys made any improvements on the Fanuc tool change patch? I have that setup on three turning centers in our shop, and it is used all day everyday for the last year and a half. I saw in your manual for your lathe, that the wear offsets are put in the columns next to the ac

Re: [Emc-developers] Joints_Axes Convention

ranch, I normally just build from source using master, apply the tool offset patch, and use a run in place config. Thanks Rick Lair Superior Roll & Turning LLC. 399 East Center Street Petersburg MI, 49270 (734) 279-1831 www.superio

Re: [Emc-developers] Joints_Axes Convention

Thanks for the help, that looks easy enough going by the wiki, as for building from a different branch that's gonna throw me a curve ball for sure, I'm still not a 100% on using the command line, but I'm sure I will get it, I've made it this far. Thanks Rick Lair Superio

[Emc-developers] Joints_Axes Convention

Hello All, How do I go about changing my config around to the joints_axes type configuration, that way I can try the "Jog while paused" option out? Thanks Rick Lair Superior Roll & Turning LLC. 399 East Center Street Petersburg MI, 49270 (734) 279-1831 www.su

[Emc-developers] DISCUSS: feed interlock pins

rlocked. > > eg pin 1 for gear change, pin 2 for door open, etc > > I think I should add spindle speed interlocks too. Anything else? > > Maybe the names should start with motion.interlock. ? > > > If I hear no rejections I will push this to master soon. > > Chris M

[Emc-developers] Jog while Program Paused

t is really the only showstopper we have found so far in our year or so of using LinuxCNC Thanks Rick Lair Superior Roll & Turning LLC. 399 East Center Street Petersburg MI, 49270 (734) 279-1831 www.superiorroll.com -

[Emc-developers] Remap Problems

Any thoughts, -- Thanks Rick Lair Superior Roll & Turning LLC. 399 East Center Street Petersburg MI, 49270 (734) 279-1831 www.superiorroll.com -- Everyone hates slow websites. So do we. Make your web apps fa