helps.
Rod Webster
*1300 896 832*
+61 435 765 611
VMN®
www.vmn.com.au
On Sun, 11 May 2025 at 20:02, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
>
> Hello,
>
> At the Debian "Reunion" in Hamburg last week I ran into Roland
Except "conv_float_s64.comp" is missing in master too.
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 28 Apr 2025 at 22:12, Bertho Stultiens wrote:
>
> On 4/28/25 1:58 PM, Rod Webster wrote:
> > I think you are compil
.
I think editing the submake file to remove the reference to this and a
couple of other components will fix your issue.
(Or checkout an earlier branch)
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 28 Apr 2025 at 21:03, Bertho Stultiens
e very careful arbitrating over decades old code as the
original context can easily be lost.
Rod Webster
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Finally!
Upgraded to sid and installed linuxcnc-uspace from the debian repositories
and the good news is the graphics are there!
I will try the buildbot2 and linuxcnc.org debs later.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 10 Apr
ll keep trying to
get 2.94 but I am out of time now.
Don't get me started about trixie wanting to upgrade my sources file to the
new format! eg..
sudo apt update
Notice: Some sources can be modernized. Run 'apt modernize-sources' to
do so.
Rod Webster
*1300 896 832*
+61 4
xcnc/commit/8ba2ee3799e94e5dd23f7dab66ccbc3c1a715a5d
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 6 Apr 2025 at 07:47, andy pugh wrote:
> On Sat, 5 Apr 2025 at 22:24, wrote:
>
> > He says the master branch no longer builds with the
t (eg near complete) on a jerk limited TP
on the forum here
https://forum.linuxcnc.org/38-general-linuxcnc-questions/55075-scurve-trajectory-planner?start=0
It links to a git repository.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 27 Mar
I for one am very happy to see 2.9.4 Make it to Debian Sid today in
Debian's package search (It took a few hours to arrive)
Thanks to everyone involved.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 16 Mar 2025 at 11:36, Steffen M
sure to use Debian Bookworm 12 and do an APT upgrade to the latest
debian version because the Debian Live builder uses the debiian version and
kernel you are using.
The kernel should be 6.1.0-30-amd64
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
Sorry I missed a setting so the file had 2.9.3 in the file name. It
may also appear elsewhere.
I am rebuilding and will upload in the morning, 11:30 pm here now.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 27 Jan 2025 at 23:14, Rod
I had an idea. You could try copying your script into this file before the
apt update
https://github.com/LinuxCNC/linuxcnc-live-build/blob/bookworm/config/hooks/normal/510-linuxcnc.hook.chroot
At one stage I was dealing with keys in this file so it should work
Rod Webster
*1300 896 832*
+61 435
the debian live build manual
https://live-team.pages.debian.net/live-manual/html/live-manual/customizing-package-installation.en.html#446
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 27 Jan 2025 at 08:42, andy pugh wrote:
> I am hav
@john, you would be better off using the (debian) RPI4 image on
the downloads page as it has linuxcnc preinstalled.
Focus on building your machine, not building a bootable linux from scratch.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed
to install QTPYVCP when
you get it sorted, then include the script.
I'm not sure if there is an equivalent mechanism in Gentoo but in Debian,
there is a specific folder that is deployed to all user's home folders
which I used for some of this stuff.
Rod Webster
*1300 896 832*
+61 435 765 611
V
the command to use.
I don't think you can assume it will compile out of the box on other
platforms any more due to divergence between the distros.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 8 Dec 2024 at 08:20, Bertho Stultiens
What happens when you checkout the tag v2.9.3?
This is the currently released code. It should compile OK.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 8 Dec 2024 at 04:56, Bertho Stultiens wrote:
> Hi,
>
> It is my understan
My thinking is that we should not care given Debian's long standing
position on POSIX.
https://lists.debian.org/debian-announce/1996/msg00022.html
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 26 Sept 2024 at 09:00, andy pugh
It does not seem to be an issue as bash is installed on Gentoo Linux by
default
https://wiki.gentoo.org/wiki/Bash
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 26 Sept 2024 at 07:37, andy pugh wrote:
> https://github.com/Linux
Just build your own and be done with it
https://kaiwantech.wordpress.com/2024/09/21/the-linux-kernel-is-now-an-rtos-with-rtl-being-fully-merged/
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 23 Sept 2024 at 07:02, theman whosoldtheworld
Defer it until the release of Debian Trixie would be my vote. Otherwise
there are bound to be similar issues to the Python 2/3 transition.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 22 Sept 2024 at 08:42, andy pugh wrote:
>
My understanding you will still need to enable the fully preemptible kernel
before compiling but there will be no need to apply the RT patch before you
do this
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 21 Sept 2024 at 03:39, andy
an existing installation, by following the steps documented under
heading 7.1 in the 2.9 Getting Linuxcnc doc
https://linuxcnc.org/docs/stable/html/getting-started/getting-linuxcnc.html#_installing_on_debian_bookworm_with_preempt_rt_kernel
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle
after the release of 2.9.3, I am planning
to update to Kernel 6.6.35
Raspberry PI Kernel Commit 21 June 2024 Commit
5263478665260ec207b8ee4751401c1d4a6a514a
But I wanted to update to the latest build environment changes at the same
time and need to find the time,
Rod Webster
*1300 896 832*
+61 435
the 6.6.35 RT patch in userpatches
and update the commit in userdata.txt
https://github.com/LinuxCNC/rpi-img-builder-lcnc/blob/2.9.2/userdata.txt#L27
to 5263478665260ec207b8ee4751401c1d4a6a514a
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On
version that the host PC is
running at build time.
Then sweet talk Andy into forking your new rtai-live-build and host your
ISO on the Downloads Page.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 11 Jul 2024 at 06:50, Bari wrote:
>
I wonder if it is worth forking the linuxcnc live build Repo and scripting
in your changes and building a RTAI ISO? It is a very simple process but
its best to build the live build environment from source as the deb is not
up to date. Details are in the debian live build docs.
Rod
On Wed, 10 Jul
very
quick process to get a working ethercat build.
Scotts a great guy and will be only too happy to help if you raise an issue
there.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 13 Jun 2024 at 06:38, Nicklas SB Karlsson wrote:
SL needs to be
updated.
Its now possible to set up automatic SSL renewal using Lets Encrypt so
there is no cost and the certificate won't expire (because it will be
renewed before it does).
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
Rod Webster
Probably a missing dependency Stuart.
Get the source with git clone per the docs.
I did a video a while ago https://youtu.be/Oe4Hfq3G2_A?si=B6_IhIcShkuF77Hk
Sometimes a dependency will not get caught when checking build dependencies.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle
would be nice to get it into testing again.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 22 Mar 2024 at 20:31, Stuart Stevenson wrote:
> Andy,
> I sent you a reply then received a message it needs moderator approval
> because
I have reported the bug to Debian
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1065640
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 8 Mar 2024 at 07:07, Rod Webster wrote:
> I think the raspi-firmware issue has been resolved.
://drive.google.com/file/d/1eHb8qX45vhPARqWA-AzsviyG00DJJ4g_/view?usp=drive_link
Ref:
https://live-team.pages.debian.net/live-manual/html/live-manual/installation.en.html#121
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 24 Jan 2024 at 02:55
:= 500 # Z
motor parameters
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 7 Feb 2024 at 23:17, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
>
>
> > Gesendet: Mittwoch, 07. Februar
It lied a lot when I asked
build me a hal file for a 3 axis milling machine that uses a mesa card
😄
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 7 Feb 2024 at 19:38, Steffen Möller via Emc-developers <
emc-develop
You need to change your sources to http://buildbot2.highlab.com/ per the
instructions there
Linuxcnc never really released a version on other than Bookworm
I'm not sure if it will give you exactly what was on the Bookworm release
which was a snapshot but it will be close.
Rod Webster
*130
The most likely issue is that your repo uses python 2.7 code and that is
depreciated in Bookworm which uses Python 3.11
Linuxcnc is now also a python 3 application to match this change.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 5 Feb
all my 6.3 kernel. There is an
instructions document if you wish to try your hand at building a later
version (say 6.6)
3. Install the correct Realtek DKMS driver
4. Enjoy using linuxcnc!
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 3 Feb 202
.
Maybe it comes back with an apt upgrade or is dependent on installed
software.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 22 Jan 2024 at 20:23, andy pugh wrote:
> On Mon, 22 Jan 2024 at 09:54, Marius wrote:
>
> > Every ti
Steffen, forgot to say to remove it:
# sudo rm
/etc/{initramfs/post-update.d/,kernel/{postinst.d/,postrm.d/}}z50-raspi-firmware
# sudo apt purge raspi-firmware
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 7 Jan 2024 at 09:10, Rod
fork of the
lInuxcnc version that was started before th release by others, there is
some config setting we have got wrong. BUt I can't find it.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 7 Jan 2024 at 07:14, Steffen Möller vi
> just á hunch - Rod knows more than I do.
I know nothing!
My gut feel it is a linuxcnc or Mesa issue. Isn't there a driver involved
on our side? I just don't know anything abou the hardware interfacing side
on the pi
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifica
ets see if they can sort out the sound first.
you can find them on Discord #arm-img-builder which is linked to from their
repo I forked https://github.com/pyavitz/rpi-img-builder
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 4 Jan 2
ing
I have to find time to merge the changes and rebuild it. I Am flat out for
a while.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 3 Jan 2024 at 22:27, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrot
for sound.
I'll wait till they sort out the compression.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Tue, 2 Jan 2024 at 10:50, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
> The Balena
me, I just can't test it.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Tue, 2 Jan 2024 at 00:01, andy pugh wrote:
> On Mon, 1 Jan 2024 at 13:57, andy pugh wrote:
>
> > Try not doing that? The RPi Imager will accept a .xz fil
t you know when we have another candidate.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 1 Jan 2024 at 23:36, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
> I just transitioned from Windo
ation, please refer to
the download page
https://linuxcnc.org/downloads/
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 31 Dec 2023 at 01:35, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wrote:
> Rod,
buildbot 2 at
http://buildbot2.highlab.com/
edit /etc/apt/sources.list.d/linuxcnc.list to use the lines shown on the
buildbot page to be something like
deb http://buildbot2.highlab.com/debian/ bookworm master-uspace
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
m.
Hopefully I will have some peace and quiet over the weekend to build a new
version.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 30 Dec 2023 at 21:58, Steffen Möller via Emc-developers <
emc-developers@lists.sourceforge.net> wr
c0wTczAg/view?usp=sharing
I will also rebuild the images for the Pi4 and Pi5, but I am kernelled out
for today!
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 30 Dec 2023 at 12:00, Rob M wrote:
> None of those images were for the Rpi-
le previously. I
don't even own a Pi5. There is no reason why you can't fork my installer
and do something constructive.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 29 Dec 2023 at 18:53, Daniel Hiepler
wrote:
> Vom: Fri, 29 De
too late to offer solutions now, get behind the current build
process and work with it.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 29 Dec 2023 at 03:04, gene heskett wrote:
> On 12/28/23 09:05, Andy Pugh wrote:
> >
> >
t (on Bullseye) rather
than Mesa which will have better network performance.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Dec 2023 at 21:46, andy pugh wrote:
> On Thu, 28 Dec 2023 at 03:24, gene heskett wrote:
>
> > All pack
in scope. It is
up to the devs to devise appropriate drivers as its out of scope of the
installer.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Dec 2023 at 14:44, gene heskett wrote:
> On 12/27/23 22:33, Rob M wrote:
> > Gen
@gene, you can probably set the locale to your environment by typing: sudo
menu-config
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Dec 2023 at 12:35, gene heskett wrote:
> On 12/27/23 16:50, Rod Webster wrote:
> > You
r
the newer Pi 5 CPU
sudo apt upgrade should update to 2.9.2
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Dec 2023 at 06:46, Sebastian Kuzminsky wrote:
> On 12/27/23 13:38, Steffen Möller via Emc-developers wrote:
> >
adding a non-real
time Python component. it sounds like the new HAL port feeding
external offsets would do the job in C and in Real time.
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 18 Nov 2023 at 03:13, Ted wrote:
>
> Sam-
> yes
d to track whats going on if the repos are not updated)
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 30 Oct 2023 at 19:54, andy pugh wrote:
> On Mon, 30 Oct 2023 at 09:43, Rod Webster wrote:
> >
> > Must be a modified one. T
the weekend.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 30 Oct 2023 at 19:19, andy pugh wrote:
> On Mon, 30 Oct 2023 at 03:56, Rod Webster wrote:
>
> > > was in fact due to a malformed repository entry on the test P
Andy,
> was in fact due to a malformed repository entry on the test PC.
Was this due to my installer or something in your environment?
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modificati
readme.md file in your home folder.
Rod Webster
1300 896 832
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 27 Oct 2023 at 19:27, andy pugh wrote:
>
> To an extent, 2.9.1 has already been released, but I have not made the
> announ
> Still can't build a package, the system really does seem to be
> impossible to persuade to not build docs
Steffan put a PR forward to enable this the debian way
https://github.com/LinuxCNC/linuxcnc/pull/2647
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modificati
one of C's strengths when
interfacing with hardware and that is the rich variety of type
definitions available.
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 11 Oct 2023 at 23:45, andy pugh wrote:
>
> On Wed, 11 Oct 2023 at 14:09, R
nce is changed to an S64, how can you
guarantee that the S64 is mapped back to the hal_u32_t when it's written
back to the Ethercat drive that has an externally defined register size?
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 11
place for you to be
programming in C. It's designed to do low level stuff, don't prevent that
in hal. After all, it is the data abstraction layer we use with linuxcnc.
We can't avoid interfacing with hardware, don't put hurdles in our way.
Rod Webster
*1300 896 832*
+61 4
How would that work when you need to match a pin type with an external data
structure?
eg. An ethercat 16 bit long pin or a gpio structure
Sometimes pins are manipulated as bit maps.
You really need to consult widely on that
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications
consistent.
The installers should not need further changes until 2.9 gets into Debian 12
It does my head in thinking through this transition!
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modif
uxcnc-live-build/pull/27
Just tell me when its OK to build them as its Friday night already here.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 6 Oct 2023 at 18:32, andy pugh wrote:
> On Thu, 5 Oct 2023 at 20:08, Steffen Möller
e will be a piece of cake (
maybe coinciding with our own Linuxcnc 2.9.1 point release).
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 5 Oct 2023 at 21:05, Steffen Möller wrote:
>
>
>
> > Gesendet: Donnerstag, 05. Oktober 2
date now is to build from source.
I will need to update the getting linuxcnc page after 2.9 is deployed. Hope
we can work around that.
Anyway, I for one am cheering you on!
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 5 Oct 2023 at 2
Andy,
I think this describes the process.
https://www.debian.org/doc/manuals/developers-reference/pkgs.html
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 5 Oct 2023 at 07:45, andy pugh wrote:
> Are there any guidelines on the proc
er/etc/skel should
be deployed to the user's home folder
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 1 Oct 2023 at 11:37, Chris Morley
wrote:
> Andy
>
> Thanks for pushing this along a bit.
> I think Phill has a pncconf
would be appreciated if you could consult more widely before
removing isolcpus as it will affect our users
scattered through every country in the world.
Rod Webster
1300 896 832
+61 435 765 611
VMN®
www.vmn.com.au
Rod Webster
1300 896 832
+61 435 765 611
VMN®
www.vmn.com.au
Sole Queensland
Sorry gremlins got in
when you run the debian/configure script do it this way
cd ~/linuxcnc-dev/debian
./configure uspace no-docs
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Sept 2023 at 06:23, Rod Webster wrote:
> Gene,
>
n the router for the
specific MAC address. That way, there is no configuring of IP addresses on
the device.
I think I've covered everything
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 28 Sept 2023 at 04:27, gene heskett wrote:
the forum now. 😀
You also need to add gpiod2 as a runtime dependency as mentioned here
https://github.com/LinuxCNC/linuxcnc/pull/2647
They are the only 2 2.9 issues I am aware of from building images for X86
and ARM64 (pi)
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modificatio
when they try to read the docs
which are supposedly written in their language.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 23 Sept 2023 at 05:34, Petter Reinholdtsen wrote:
>
> Are there any volunteers around able to bring mo
l
compatibility. That has to be their problem, not ours. The Linux Kernel
6.5 has been released so that seems to be 11 versions ahead of the last
RTAI compatible kernel. When do we accept that RTAI is really yesterday's
technology? Where is the port to Xenomai 4?
Rod Webster
*1300 896 832*
+61
he kernel is built from raspberry's code repository.
Incidentally, the RT patch is now available for 6.1.54 and raspberry have
also just merged that branch
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 20 Sept 2023 at 04:37, gene
ed in that.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Tue, 19 Sept 2023 at 17:17, gene heskett wrote:
> On 9/18/23 23:32, Rod Webster wrote:
> > Gene, Use this link.
> > https://drive.google.com/drive/folders/1Bv4ceKAa0nYwD
missing dependencies that have snuck into the Linuxcnc
source.that are not listed in the deb files on both images
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Tue, 19 Sept 2023 at 11:49, gene heskett wrote:
> On 9/18/23 01:05, Rod Webs
the forum... It's only a week or so out of date.
If you decide to build from source, this will have all of the
dependencies locked in.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 18 Sept 2023 at 12:42, gene heskett wrote:
> On
Agree with Andy https://packages.debian.org/buster/libgpiod2
Something is wrong with your sources.list or you have no internet
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 18 Sept 2023 at 08:18, andy pugh wrote:
> On Sun, 17 Sept 2
I want to do is to also save the linuxcnc .debs in the same
folder
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 8 Sept 2023 at 14:54, Rob M wrote:
> Hi all,
> I've recently been building and testing some Bookworm based Raspber
save space. Commenting
that out lets you copy the debs somewhere but as the /tmp folder is
overwritten in general use, they get deleted anyway. So save them from the
SD card before deployment
Perhaps the debs should be copied to another accessible folder before
everything is deleted.
Rod Webster
*130
ving this a try. I know a couple have got it working
from my repo so don't give up!
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Tue, 5 Sept 2023 at 09:57, condit.alan--- via Emc-developers <
emc-developers@lists.sourceforge.net> wrot
ripts/uscripts
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 3 Sept 2023 at 15:11, gene heskett wrote:
> On 9/2/23 23:43, Rod Webster wrote:
> > Hi guys, I have forked the Raspberry Pi installer and built a linuxcnc
> > branch
&g
another location in the script /files/userscript/uscripts
You pi guys please give it a go and provide feedback on my repo.
Rod Webster
*1300 896 832*
+61 435 765 611
VMN®
www.vmn.com.au
<https://www.reviews.io/company-reviews/store/vmn1>
_
ildbot
On older pi's be sure to update the bootloader firmware.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Thu, 31 Aug 2023 at 01:18, Sebastian Kuzminsky wrote:
> On 8/29/23 14:11, Peter Wallace wrote:
> > On Tue, 29 Aug 2023
://github.com/LinuxCNC/linuxcnc-live-build/pull/27
Please review it.
It would be great if some of you could review the pull request and the
example ISO that it links to.
https://drive.google.com/file/d/16nprK_5HeURoNGd3tHWSVsxtHUGY3_S_/view?usp=sharing
Thanks in anticipation!
Rod Webster
*1300 896
build/installer for X86 machines using Bookworm and the buildbot debs. I
got this working yesterday, it just needs a bit of rine tuning.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sat, 19 Aug 2023 at 01:48, gene heskett wrote:
> On 8/18
is on and off but don't have the skillset.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 16 Aug 2023 at 22:02, Steffen Möller wrote:
> Hello,
>
> I had thought that it would be an interesting extension of HAL to come up
>
I hope it's soon. There are only 6 issues outstanding when I look. :)
I only ever use the online docs at linuxcnc.org.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Mon, 14 Aug 2023 at 19:26, Marius wrote:
> Rod
>
> Thanks fo
n the ISO, that was not always the case.
It was quite some time before 2.9/master became available on Buster
following the move to Python 3.x. Some of us responded to that by
abandoning the Buster ISO.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
O
uses a pi to build everything which is not desirable moving forward.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Sun, 13 Aug 2023 at 23:05, gene heskett wrote:
> On 8/13/23 05:17, Steffen Mller wrote:
> > Hello,
> >
> &g
mming...
Rod Webster
1300 896 832
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Fri, 28 Jul 2023 at 01:13, andy pugh wrote:
>
> On Thu, 27 Jul 2023 at 01:24, andy pugh wrote:
>
> > I think that this is comparing two pointers to the same struct. But
> >
resolved so it would be good to get up to
date links.
Rod Webster
VMN®
www.vmn.com.au
Ph: 1300 896 832
Mob: +61 435 765 611
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
#x27;s not
ready yet. He was going to include parameters to also build linuxcnc as
part of his project.
Also, Armbian also has binary images based on Debian Bookworm with XFCE so
I would go that route if you do have a play.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modificatio
were constrained because we needed vtk for
python and it took many hours to build. Now I think it's included in the
Debian 12 repositories.
Rod Webster
*1300 896 832*
+61 435 765 611
Vehicle Modifications Network
www.vehiclemods.net.au
On Wed, 19 Jul 2023 at 07:54, andy pugh wrote:
> O
1 - 100 of 315 matches
Mail list logo
